/4%20GC%20port%20esd%20board%20(for%20wii%20mini).kicad_pcb.jpg?size=s&soon)
4 GC port esd board (for wii mini)
abzman/wii-mini-boards
PCBs for use modding a wii mini

PCBs for use modding a wii mini
GC memory card breakout board (wii pinout) is an open-source printed circuit board by abzman, from the abzman/wii-mini-boards repository on GitHub, published under the Unlicense licence. It is a 2-layer board of 71.1 × 50.8 mm with 21 parts on 19 nets, routed with 249 tracks and 37 vias.
Its parts include 8 capacitors, 4 diodes and 3 connectors. It belongs with the interfaces and adapters and microcontroller boards boards of this library.
PCBs for use modding a wii mini
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | C | Capacitor_SMD:C_0603_1608Metric | C1, C2, C3, C4, C5, C6, C7, C8 |
| 4 | WE-TVS_824014 | Evan's misc parts:WE-TVS_SOT23-6L | D1, D2, D3, D4 |
| 1 | LOGO | Evan's misc parts:OSHW gear | G*** |
| 1 | LOGO | Evan's misc parts:Evan Logo | G*** |
| 1 | Wii_GC_memory_card_socket | Evan's misc parts:Wii GC memory card socket | P1 |
| 1 | memory card 1 | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical | J1 |
| 1 | memory card 2 | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical | J2 |
The 17 most common of 21 parts.
/4%20GC%20port%20esd%20board%20(for%20wii%20mini).kicad_pcb.jpg?size=s&soon)
abzman/wii-mini-boards
PCBs for use modding a wii mini


gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software

mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog


hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

drandyhaas/KiCadRoutingTools
A set of Python/Rust tools to aid routing in KiCad

Arrow-air/project-quiver
Project Quiver documentation, designs, and project artifacts.


It measures 71.1 × 50.8 mm and has 2 copper layers, 1.6 mm thick.
21 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the abzman/wii-mini-boards repository on GitHub, at the commit this page was made from: the board is GC memory card breakout board (wii pinout)/GC memory card breakout board (wii pinout).kicad_pcb and its schematic 4 GC port esd board (for wii mini)/4 GC port esd board (for wii mini).kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the Unlicense licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).