
Arduino ads129x
OpenElectronicsLab/OpenHardwareExG
The OpenHardwareExG is a platform for ECG, EEG, EMG, ENG, EOG, and evoked potential applications. http://openelectronicslab.github.io/OpenHardwareExG/

rp2350 boards
Centi pi'd is an open-source printed circuit board by abzman, from the abzman/rp2350-boards repository on GitHub, published under the Unlicense licence. It is a 2-layer board of 21 × 66.9 mm with 71 parts on 71 nets, routed with 66 tracks and 6 vias.
It is built around the W25Q128JVSIQ, TF-115YY-BCP9 and APS6404L-3SQN-SN, with the LD1117S33, AO3400A and ECS-120-20-33-CKM-TR among its other parts. Its parts include 25 capacitors, 20 resistors, 4 ICs, 4 connectors and 3 diodes. It belongs with the RP2350 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 14 | 100nF | Capacitor_SMD:C_0603_1608Metric | C3, C6, C8, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21 |
| 4 | 10uF | Capacitor_SMD:C_0603_1608Metric | C2, C7, C22, C24 |
| 3 | 100K | Resistor_SMD:R_0603_1608Metric | R15, R16, R17 |
| 3 | 10K | Resistor_SMD:R_0603_1608Metric | R5, R7, R8 |
| 2 | 100 | Resistor_SMD:R_0603_1608Metric | R13, R14 |
| 2 | 1K | Resistor_SMD:R_0603_1608Metric | R6, R10 |
| 2 | 1nF | Capacitor_SMD:C_0603_1608Metric | C23, C25 |
| 2 | 2.2K | Resistor_SMD:R_0603_1608Metric | R3, R18 |
| 2 | 27 | Resistor_SMD:R_0603_1608Metric | R11, R12 |
| 2 | 27pF | Capacitor_SMD:C_0603_1608Metric | C9, C10 |
| 2 | 5.1K | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 2 | Conn_01x20_Socket | Connector_PinHeader_2.54mm:PinHeader_1x20_P2.54mm_Vertical | J2, J3 |
| 1 | 1 | Resistor_SMD:R_0603_1608Metric | R19 |
| 1 | 1V1 | TestPoint:TestPoint_Pad_1.5x1.5mm | TP7 |
| 1 | 1uF | Capacitor_SMD:C_0603_1608Metric | C5 |
| 1 | 200 | Resistor_SMD:R_0603_1608Metric | R20 |
| 1 | 22uF | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | 3.3uH | Inductor_SMD:L_1008_2520Metric | L1 |
| 1 | 4.7uF | Capacitor_SMD:C_0603_1608Metric | C4 |
| 1 | 442K | Resistor_SMD:R_0603_1608Metric | R9 |
| 1 | 5.6K | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | AO3400A | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | APS6404L-3SQN-SN | Evan's Kicad Library:SOIC127P600X175-8N | IC2 |
| 1 | BM03B-SRSS-TBLFSN | Evan's Kicad Library:CONN_BM03B-SRSS-TBLFSN_JST | J1 |
| 1 | BOOTSEL | Button_Switch_THT:SW_TH_Tactile_Omron_B3F-10xx | SW1 |
| 1 | BOOTSEL | TestPoint:TestPoint_Pad_1.5x1.5mm | TP6 |
| 1 | D_Schottky | Diode_SMD:D_SMA | D1 |
| 1 | ECS-120-20-33-CKM-TR | Evan's Kicad Library:ECS1202033CKMTR | Y1 |
| 1 | GND | TestPoint:TestPoint_Pad_1.5x1.5mm | TP1 |
| 1 | GPIO23 | TestPoint:TestPoint_Pad_1.5x1.5mm | TP4 |
| 1 | GPIO24 | TestPoint:TestPoint_Pad_1.5x1.5mm | TP11 |
| 1 | GPIO25 | LED_SMD:LED_0603_1608Metric | D3 |
| 1 | GPIO25 | TestPoint:TestPoint_Pad_1.5x1.5mm | TP5 |
| 1 | GPIO29 | TestPoint:TestPoint_Pad_1.5x1.5mm | TP10 |
| 1 | LD1117S33 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | Power | LED_SMD:LED_0603_1608Metric | D2 |
| 1 | RESET | Button_Switch_THT:SW_TH_Tactile_Omron_B3F-10xx | SW2 |
| 1 | RP2350A-QFN60 | Evan's Kicad Library:RP2350A_QFN-60_EP_7.75x7.75_Pitch0.4mm | U1 |
| 1 | TF-115YY-BCP9 | Evan's Kicad Library:TF-115YY-ACP9 | J4 |
| 1 | TYPE-C-31-M-12 | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | USB_C1 |
| 1 | USB DM | TestPoint:TestPoint_Pad_1.5x1.5mm | TP2 |
| 1 | USB DP | TestPoint:TestPoint_Pad_1.5x1.5mm | TP3 |
| 1 | W25Q128JVSIQ | Evan's Kicad Library:SOIC127P790X216-8N | IC1 |

OpenElectronicsLab/OpenHardwareExG
The OpenHardwareExG is a platform for ECG, EEG, EMG, ENG, EOG, and evoked potential applications. http://openelectronicslab.github.io/OpenHardwareExG/

dustin-lehmann/TWIPR
See https://github.com/dustin-lehmann/TWIPR/wiki for descriptions on how to use the hardware and software

Pico-Framework/RP2350B-RM2-module
Single-sided RPi RP2350B compute module with RM2 Wi-Fi and Bluetooth

PSU-Ext-Org/psu-ext-hardware
A repository to store PSU-EXT hardware design assets, schematics, circuit diagrams, CAD files and manufacturing data.

abzman/pelco-kbd300a-replacement-controller
replacement board and code for this joystick and keyboard


abzman/esp-IoT-boards
R5v: 1.9K for the red LED, 3.9K for the blue LED

alph4345/test
TrinketCore puts everything a small rechargeable gadget needs on one 40 × 60 mm board, ready to order assembled from PCBWay:
It measures 21 × 66.9 mm and has 2 copper layers, 1.6 mm thick.
71 parts, built around the W25Q128JVSIQ, TF-115YY-BCP9, APS6404L-3SQN-SN and LD1117S33. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the abzman/rp2350-boards repository on GitHub, at the commit this page was made from: the board is centi-pi'd/centi-pi'd.kicad_pcb and its schematic centi-pi'd/centi-pi'd.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the Unlicense licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).