Skip to the content
2 layers25.4 × 28.6 mmWmbus, the printed circuit board in 3D

A0 IoT Gateway

Size
25.4 × 28.6 mm
Copper layers
2
Thickness
1.6 mm
Parts
15
Nets
21
Pads
43
Tracks, vias
137, 12
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
5 Nov 2024
Updated
23 Sep 2026

Overview

Wmbus is an open-source printed circuit board by absmach, from the absmach/a0 repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 25.4 × 28.6 mm with 15 parts on 21 nets, routed with 137 tracks and 12 vias.

It is built around the RC-S2LP-868. Its parts include 2 resistors, 2 connectors, 1 capacitor and 1 IC. It belongs with the radio and wireless boards of this library.

Main components

1

README

a0/README.md

A0 Base Board

A0 is the base board of the modular A0 IoT gateway, built around an ESP32-C6 module (RISC-V, Wi-Fi 6, Bluetooth 5, IEEE 802.15.4).

About the ESP32-C6

The ESP32-C6 is Espressif's first Wi-Fi 6 SoC, integrating 2.4 GHz Wi-Fi 6 (802.11ax), Bluetooth 5 (LE) and IEEE 802.15.4 (Thread/Zigbee) radio connectivity in a single low-power chip (product page).

SpecDetails
CPUHigh-performance 32-bit RISC-V core, up to 160 MHz, plus a low-power (LP) 32-bit RISC-V core, up to 20 MHz
Memory320 KB ROM, 512 KB SRAM, external flash
Wireless2.4 GHz Wi-Fi 6 (802.11ax, 20 MHz) with 802.11 b/g/n (20/40 MHz) backward compatibility; OFDMA up/downlink, downlink MU-MIMO, Target Wake Time (TWT); Bluetooth 5 LE with coded PHY long-range and 2 Mbps high-throughput PHY; IEEE 802.15.4 for Thread/Zigbee
GPIO30 (QFN40) or 22 (QFN32) programmable GPIOs
PeripheralsSPI, UART, I2C, I2S, RMT, TWAI, PWM, SDIO, Motor Control PWM, 12-bit ADC, temperature sensor
SecurityRSA-3072 secure boot, AES-128/256-XTS flash encryption, digital signature and HMAC peripherals, hardware cryptographic accelerators, Trusted Execution Environment (TEE) for privilege/software separation
SoftwareOpen-source ESP-IDF; ESP-Hosted / ESP-AT for co-processor use; ESP RainMaker; Zephyr support

Wi-Fi 6 features (OFDMA, MU-MIMO, TWT) deliver low latency and long battery life even in congested RF environments, while combined Wi-Fi + BLE + 802.15.4 support makes it a natural fit for Matter end-point devices, Thread Border Routers, and Zigbee bridges.

Overview

A0 provides everything needed to power and run the gateway, while pushing all radio/cellular connectivity onto removable expansion modules:

  • ESP32-C6 module on top — main compute + Wi-Fi/BLE/802.15.4 connectivity, with hardware secure boot, flash encryption, and a TEE.
  • Power:
    • USB-C power input
    • External power supply input
    • Battery support (with charging)
  • Expansion: two module slots, BUS1 and BUS2, where any of the following modules can be plugged in:
    • SIM7080G — NB-IoT/LTE-M cellular + GNSS
    • WMBUS — Wireless M-Bus radio
    • E07-400M10S — Sub-GHz radio (400 MHz, 10 dBm)

Manufacturing

Gerber and assembly outputs are in jlcpcb/ (gerber/ and production_files/).

Parts

15
QtyValueFootprintReferences
2Conn_01x08Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_VerticalJ1, J2
10.1uFCapacitor_SMD:C_0805_2012MetricC1
1100Resistor_SMD:R_0805_2012MetricR1
110KResistor_SMD:R_0805_2012MetricR2
1G***kibuzzard-6A563B96kibuzzard-6A563B96
1G***kibuzzard-6A563B41kibuzzard-6A563B41
1G***kibuzzard-6A563BEFkibuzzard-6A563BEF
1G***kibuzzard-6A563B7Dkibuzzard-6A563B7D
1G***kibuzzard-6A563B71kibuzzard-6A563B71
1G***kibuzzard-6A563B88kibuzzard-6A563B88
1G***kibuzzard-6A563B65kibuzzard-6A563B65
1G***kibuzzard-6A563B50kibuzzard-6A563B50
1G***kibuzzard-6A563B31kibuzzard-6A563B31
1RC-S2LP-868modules:RC-S2LP-868U2

More from absmach/a0

3
  • 4 layers54.6 × 86.3 mmA0, the printed circuit board in 3D

    A0

    absmach/a0

    A0 IoT Gateway

    131 parts16Apache-2.0
  • 4 layers25.4 × 57.2 mmSim7080g, the printed circuit board in 3D

    Sim7080g

    absmach/a0

    A0 IoT Gateway

    57 parts16Apache-2.0
  • 2 layers25.4 × 28.6 mmE07400M10S, the printed circuit board in 3D

    E07400M10S

    absmach/a0

    A0 IoT Gateway

    14 parts16Apache-2.0

Similar boards

  • 2 layers19 × 76 mmSub, the printed circuit board in 3D

    Sub

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    15 parts3kApache-2.0
  • 2 layers26.7 × 62.2 mmDeniseadapter, the printed circuit board in 3D

    Deniseadapter

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    15 parts1kGPL-3.0
  • 2 layers100 × 44 mmVideoslot, the printed circuit board in 3D

    Videoslot

    mntmn/amiga2000-gfxcard

    MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog

    15 parts1k
  • 2 layers91 × 51 mmBusinessCard, the printed circuit board in 3D

    BusinessCard

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    15 parts915
  • 2 layers24.3 × 57.9 mmFlosspods pro flex, the printed circuit board in 3D

    Flosspods pro flex

    kenp-io/not-for-airpods-repairs

    The content of this repository is licensed under the WTFPL License. Please have a close look at the terms before using this material.

    15 parts609WTFPL
  • 2 layers20.3 × 15.2 mmL0 Load, the printed circuit board in 3D

    L0 Load

    Luos-io/luos_engine

    Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

    15 parts546MIT
  • 2 layers68 × 50 mmEleLab v2 PowerFeed, the printed circuit board in 3D

    EleLab v2 PowerFeed

    Chrismettal/EleLab_v2

    Cheap DIY lab system for hobbyists and the tinkering folk

    15 parts531GPL-3.0
  • 2 layers50.8 × 35.6 mmInterface, the printed circuit board in 3D

    Interface

    harbaum/I2C-Tiny-USB

    Cheap and simple I²C to USB interface

    15 parts454

Questions

How big is the Wmbus PCB?

It measures 25.4 × 28.6 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Wmbus use?

15 parts, built around the RC-S2LP-868. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Wmbus KiCad files?

From the absmach/a0 repository on GitHub, at the commit this page was made from: the board is modules/wmbus/wmbus.kicad_pcb and its schematic a0/a0.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Wmbus design in my own project?

Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).