Skip to the content
2 layers25.4 × 28.6 mmE07400M10S, the printed circuit board in 3D

E07400M10S

absmach/a016

A0 IoT Gateway

Size
25.4 × 28.6 mm
Copper layers
2
Thickness
1.6 mm
Parts
14
Nets
21
Pads
40
Tracks, vias
132, 22
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
5 Nov 2024
Updated
23 Sep 2026

Overview

E07400M10S is an open-source printed circuit board by absmach, from the absmach/a0 repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 25.4 × 28.6 mm with 14 parts on 21 nets, routed with 132 tracks and 22 vias.

It is built around the E07-400M10S. Its parts include 2 connectors, 1 capacitor and 1 IC. It belongs with the radio and wireless boards of this library.

Main components

1

README

a0/README.md

A0 Base Board

A0 is the base board of the modular A0 IoT gateway, built around an ESP32-C6 module (RISC-V, Wi-Fi 6, Bluetooth 5, IEEE 802.15.4).

About the ESP32-C6

The ESP32-C6 is Espressif's first Wi-Fi 6 SoC, integrating 2.4 GHz Wi-Fi 6 (802.11ax), Bluetooth 5 (LE) and IEEE 802.15.4 (Thread/Zigbee) radio connectivity in a single low-power chip (product page).

SpecDetails
CPUHigh-performance 32-bit RISC-V core, up to 160 MHz, plus a low-power (LP) 32-bit RISC-V core, up to 20 MHz
Memory320 KB ROM, 512 KB SRAM, external flash
Wireless2.4 GHz Wi-Fi 6 (802.11ax, 20 MHz) with 802.11 b/g/n (20/40 MHz) backward compatibility; OFDMA up/downlink, downlink MU-MIMO, Target Wake Time (TWT); Bluetooth 5 LE with coded PHY long-range and 2 Mbps high-throughput PHY; IEEE 802.15.4 for Thread/Zigbee
GPIO30 (QFN40) or 22 (QFN32) programmable GPIOs
PeripheralsSPI, UART, I2C, I2S, RMT, TWAI, PWM, SDIO, Motor Control PWM, 12-bit ADC, temperature sensor
SecurityRSA-3072 secure boot, AES-128/256-XTS flash encryption, digital signature and HMAC peripherals, hardware cryptographic accelerators, Trusted Execution Environment (TEE) for privilege/software separation
SoftwareOpen-source ESP-IDF; ESP-Hosted / ESP-AT for co-processor use; ESP RainMaker; Zephyr support

Wi-Fi 6 features (OFDMA, MU-MIMO, TWT) deliver low latency and long battery life even in congested RF environments, while combined Wi-Fi + BLE + 802.15.4 support makes it a natural fit for Matter end-point devices, Thread Border Routers, and Zigbee bridges.

Overview

A0 provides everything needed to power and run the gateway, while pushing all radio/cellular connectivity onto removable expansion modules:

  • ESP32-C6 module on top — main compute + Wi-Fi/BLE/802.15.4 connectivity, with hardware secure boot, flash encryption, and a TEE.
  • Power:
    • USB-C power input
    • External power supply input
    • Battery support (with charging)
  • Expansion: two module slots, BUS1 and BUS2, where any of the following modules can be plugged in:
    • SIM7080G — NB-IoT/LTE-M cellular + GNSS
    • WMBUS — Wireless M-Bus radio
    • E07-400M10S — Sub-GHz radio (400 MHz, 10 dBm)

Manufacturing

Gerber and assembly outputs are in jlcpcb/ (gerber/ and production_files/).

Parts

14
QtyValueFootprintReferences
2Conn_01x08Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_VerticalJ1, J2
10.1uFCapacitor_SMD:C_0805_2012MetricC1
1E07-400M10Smodules:C2965513U1
1G***kibuzzard-6A563B50kibuzzard-6A563B50
1G***kibuzzard-6A5A4D79kibuzzard-6A5A4D79
1G***kibuzzard-6A563B65kibuzzard-6A563B65
1G***kibuzzard-6A563B41kibuzzard-6A563B41
1G***kibuzzard-6A563B71kibuzzard-6A563B71
1G***kibuzzard-6A563B7Dkibuzzard-6A563B7D
1G***kibuzzard-6A5A4D23kibuzzard-6A5A4D23
1G***kibuzzard-6A563B88kibuzzard-6A563B88
1G***kibuzzard-6A563B96kibuzzard-6A563B96
1G***kibuzzard-6A5A4D90kibuzzard-6A5A4D90

More from absmach/a0

3
  • 4 layers54.6 × 86.3 mmA0, the printed circuit board in 3D

    A0

    absmach/a0

    A0 IoT Gateway

    131 parts16Apache-2.0
  • 4 layers25.4 × 57.2 mmSim7080g, the printed circuit board in 3D

    Sim7080g

    absmach/a0

    A0 IoT Gateway

    57 parts16Apache-2.0
  • 2 layers25.4 × 28.6 mmWmbus, the printed circuit board in 3D

    Wmbus

    absmach/a0

    A0 IoT Gateway

    15 parts16Apache-2.0

Similar boards

  • 4 layers49 × 55 mmRfGateway, the printed circuit board in 3D

    RfGateway

    maxim75/cc1101_receiver_esp32

    ESP32-S3 firmware that receives RF packets from two radios simultaneously and displays decoded data on an SH1107 128×128 OLED and serial monitor.

    40 parts1
  • 2 layers116.8 × 30 mmType d, the printed circuit board in 3D

    Type d

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    14 parts3kApache-2.0
  • 2 layers32 × 22 mmDiff driver, the printed circuit board in 3D

    Diff driver

    rene-dev/stmbl

    AC Servo Driver for STM32F4

    14 parts990GPL-3.0
  • 2 layers34 × 45 mm2032Charger, the printed circuit board in 3D

    2032Charger

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    14 parts915
  • 2 layers34 × 109.9 mmTdisplay s3, the printed circuit board in 3D

    Tdisplay s3

    landonr/homeThing

    Wifi Smart Home Remotes that run on ESPHome

    14 parts551GPL-3.0
  • 2 layers45.3 × 42.7 mmMainPcb, the printed circuit board in 3D

    MainPcb

    adamb314/ServoProject

    Getting the most out of your hobby servo

    14 parts545
  • 2 layers42.5 × 28.8 mmC5VRX JACK DIY, the printed circuit board in 3D

    C5VRX JACK DIY

    Twotoz/C5VRX

    Ultra-minimal, zero-CPU 5.8 GHz analog FPV video receiver using ESP32-C5 Wi-Fi 6 PHY MODEM_DIAG, BitScrambler WBFM demodulation & resistor DAC CVBS

    14 parts515GPL-3.0

Questions

How big is the E07400M10S PCB?

It measures 25.4 × 28.6 mm and has 2 copper layers, 1.6 mm thick.

What parts does the E07400M10S use?

14 parts, built around the E07-400M10S. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the E07400M10S KiCad files?

From the absmach/a0 repository on GitHub, at the commit this page was made from: the board is modules/E07400M10S/E07400M10S.kicad_pcb and its schematic a0/a0.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the E07400M10S design in my own project?

Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).