

Hardhat
- Size
- 59.8 × 62.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 24
- Nets
- 34
- Pads
- 103
- Tracks, vias
- 202, 1
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 20 Aug 2026
- Updated
- 24 Aug 2026
Overview
Hardhat is an open-source printed circuit board by abplayzGH, from the abplayzGH/Kicad repository on GitHub. It is a 2-layer board of 59.8 × 62.5 mm with 24 parts on 34 nets, routed with 202 tracks and 1 via.
It is built around the 74LS74PC, L7805 and SN74LS04N. Its parts include 8 resistors, 6 capacitors, 6 ICs and 3 connectors.
Main components
374LS74PC
DIP-140ns 0℃~+70℃ 1 2 20MHz 3.5pF 35ns@5V,50pF 4.5ns 4.75V~5.25V 400uA 74LS Series 8mA 8mA Asynchronous Complementary D-Type Rising Edge Set and Reset DIP-14 Flip FlopsTexas InstrumentsFlip FlopsL7805
TO-220ST0℃~+125℃@(Tj) 1 1.2A 20V 2V@(1A) 42uV 500uA 5V 73dB@(120Hz) Fixed Positive Short Circuit Protection TO-220ST Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSOSENVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsSN74LS04N
PDIP-140℃~+70℃ 1 15ns@5V,15pF 2.7V~3.4V 2V 4.75V~5.25V 400uA 500mV 6 74LS 800mV 8mA PDIP-14 Inverters ROHSTexas InstrumentsInverters
Parts
24| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 220 Ohm | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1, R2, R7, R8 |
| 4 | 220 nF | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C1, C2, C3, C4 |
| 3 | 10kΩ | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R3, R4, R6 |
| 2 | Conn_01x04_Socket | Connector_PinHeader_2.00mm:PinHeader_1x04_P2.00mm_Vertical | J2, J3 |
| 2 | LM555xN | Package_DIP:DIP-8_W7.62mm | U5, U7 |
| 1 | 0.1uF | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C6 |
| 1 | 0.22uF | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C5 |
| 1 | 1MΩ | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R5 |
| 1 | 74LS08 | Package_DIP:CERDIP-14_W7.62mm_SideBrazed_Socket | U3 |
| 1 | 74LS74 | Package_DIP:CERDIP-14_W7.62mm_SideBrazed_Socket | U1 |
| 1 | Battery | Battery:BatteryHolder_Bulgin_BX0034_1xAAA | BT1 |
| 1 | Conn_01x02_PWR_SW | Connector_PinHeader_2.00mm:PinHeader_1x02_P2.00mm_Vertical | J1 |
| 1 | L7805 | Package_TO_SOT_THT:TO-3P-3_Vertical | U4 |
| 1 | SN74LS04N | Package_DIP:CERDIP-14_W7.62mm_SideBrazed_Socket | U2 |
Similar boards
- 2 layers

- 4 layers133.4 × 151.8 mm

Clock module 6502
Grudz/6502_Computer
This repository stores everything for my 6502 project. This includes schematics, datasheets, C scripts, and assembly programs
69 parts1 - 2 layers177.8 × 200.9 mm

- 4 layers64.8 × 62.7 mm

- 2 layers271.8 × 78.7 mm

PCPI AppliCard
baldengineer/bit-preserve
Project for capturing vintage, classic, aka old computer schematics in KiCad.
82 parts446 - 4 layers89.9 × 120.4 mm

Bus
benanderman/spork-8
An 8-bit CPU, made with TTL chips on custom, modular PCBs. Includes board designs, and Arduino code to program its instruction set and programs.
35 parts61MIT - 2 layers

- 2 layers169.1 × 191 mm

Entrex Trapezoid Interface Board v23
ForgottenMachines/Entrex
The technologies documented here will include all like-kind systems manufactured by Nixdorf, Redifon, ROCC & Mera, all originally designed by Entrex Inc, Burlington, MA USA.
101 parts1
Questions
How big is the Hardhat PCB?
It measures 59.8 × 62.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Hardhat use?
24 parts, built around the 74LS74PC, L7805 and SN74LS04N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Hardhat KiCad files?
From the abplayzGH/Kicad repository on GitHub, at the commit this page was made from: the board is hardhat/hardhat.kicad_pcb and its schematic hardhat/hardhat.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Hardhat design in my own project?
Its repository states no licence, so its author keeps all rights: ask abplayzGH before reusing the design.