Skip to the content
2 layers65.3 × 49 mmPiano, the printed circuit board in 3D

The main goal of this project is to enhance and reinforce the basics of PCB designing.

Size
65.3 × 49 mm
Copper layers
2
Thickness
1.6 mm
Parts
11
Nets
32
Pads
56
Tracks, vias
43, 0
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
16 Jul 2026
Updated
13 Aug 2026

Overview

Piano is an open-source printed circuit board by AboKafta, from the AboKafta/piano repository on GitHub. It is a 2-layer board of 65.3 × 49 mm with 11 parts on 32 nets, routed with 43 tracks and 0 vias.

It is built around the PKM22EPPH4001-B0. Its parts include 4 resistors and 4 switches. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

1

README

README.md

piano

The main goal of this project is to enhance and reinforce the basics of PCB designing.

With this in knowledge, I opened my Arduino beginners guidebook and chose the Piano project. This comes with an image of the breadboard prototype, a schematic drawing and the code.

After reading about the project, I opened up KiCad and began making a schematic. Instead of connecting everything with wires and copying the reference exactly as it was, I decided to use labels for the time. The other differences from the reference schematic is changing the Arduino Uno to an Arduino Nano, and selecting a buzzer drawing for the piezo.

The footprint, symbol, and 3d model for the piezo were gotten from: https://www.digikey.com/en/products/detail/murata-electronics/PKM22EPPH4001-B0/1219323 The rest of the footprints/symbols/3d models were obtained from the pre-installed KiCad library

I made my first drawing and it had issues such as duplicate labels and mismatched labels. Additionally, I got a power output error after running ERC. I had to put a power flag on the ground pin of the Nano to specify it was outputting power.

With the errors cleaned, the schematic was done: image

There weren’t any issues that came up while placing and routing components. This is the final product: image image image

WhatsApp Image 2026-08-13 at 12 46 29 PM

https://github.com/user-attachments/assets/582eb45c-a093-4306-8a8f-120d23ab803b

Parts

11
QtyValueFootprintReferences
4SW_PushButton_Switch_THT:SW_PUSH_6mmSW1, SW2, SW3, SW4
210KResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR2, R4
11MResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR3
1220Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR1
1Arduino_Nano_EveryModule:Arduino_NanoA1
1LOGOLOGOG***
1PKM22EPPH4001-B0piezo:piezoLS1

Similar boards

  • 2 layers268 × 72.5 mmMain board v1, the printed circuit board in 3D

    Main board v1

    arkonique/handheld_led

    47 parts
  • 2 layers60 × 30 mmController, the printed circuit board in 3D

    Controller

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    11 parts3kApache-2.0
  • 2 layers103 × 30.5 mmTS Front Endcap, the printed circuit board in 3D

    TS Front Endcap

    EEVengers/ThunderScope

    ThunderScope GitHub Repo

    11 parts1.3kMIT
  • 2 layers26 × 30 mmExpansion Card, the printed circuit board in 3D

    Expansion Card

    FrameworkComputer/ExpansionCards

    Reference designs and documentation to create Expansion Cards for the Framework Laptop

    11 parts1.1kCC-BY-4.0
  • 2 layers53.9 × 23.2 mmBuffer, the printed circuit board in 3D

    Buffer

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    11 parts1kGPL-3.0
  • 2 layers10 × 20 mm2 connector Sensor Board, the printed circuit board in 3D

    2 connector Sensor Board

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    11 parts915
  • 2 layersFet module, the printed circuit board in 3D

    Fet module

    ByteWelder/Decktility

    A handheld PC

    11 parts855CC-BY-SA-4.0
  • 2 layers47 × 33 mmSevensegment led display module, the printed circuit board in 3D

    Sevensegment led display module

    tardate/LittleArduinoProjects

    a collection of "Little Electronic & Arduino Projects", most involving electronics or an Arduino in one way or another!

    11 parts803MIT

Questions

How big is the Piano PCB?

It measures 65.3 × 49 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Piano use?

11 parts, built around the PKM22EPPH4001-B0. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Piano KiCad files?

From the AboKafta/piano repository on GitHub, at the commit this page was made from: the board is Piano.kicad_pcb and its schematic Piano.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Piano design in my own project?

Its repository states no licence, so its author keeps all rights: ask AboKafta before reusing the design.