2 layers91.4 × 101.6 mm
Vector gen
qu1j0t3/vector_gen
In first version of PCB there is a bug that leaves U6 Vss/Vdd pins floating and U5 Vdd floating:
103 parts13
2 layers100 × 60 mm
Triple S Generator
Abit-byte/Triple-S-Generator- Size
- 100 × 60 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 32
- Nets
- 23
- Pads
- 93
- Tracks, vias
- 137, 0
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 30 Jun 2026
- Updated
- 30 Jun 2026
Overview
Triple S Generator is an open-source printed circuit board by Abit-byte, from the Abit-byte/Triple-S-Generator repository on GitHub. It is a 2-layer board of 100 × 60 mm with 32 parts on 23 nets, routed with 137 tracks and 0 vias.
It is built around the TL072IP. Its parts include 11 resistors, 7 capacitors, 4 diodes, 2 ICs and 2 connectors.
Main components
1README
README.mdTriple-S Generator
Un générateur de fonctions analogique compact, construit autour de l'amplificateur opérationnel TL072IP, capable de produire des signaux sinusoïdal, en dent de scie et carré.
Caractéristiques :
- Trois formes d'onde simultanées : sortie sinusoïdale, dent de scie et carrée, sélectionnables via les commandes en façade
- Large plage de fréquences : condensateurs de calibrage commutables (3.3µF / 33nF / 330pF) couvrant environ 1.5 Hz à 150 kHz
- L'option de modifier le temps de montée et de descente, l'amplitude et la composante continue du signal avec des potentiomètres
- Alimentation symétrique ±9V pour des signaux de sortie centrés et propres
- Construction en traversant (THT) avec des composants largement disponibles (TL072IP, diodes 1N4148, composants passifs standards)
- PCB 2 couches avec plan de masse en cuivre pour réduire le bruit
- Connecteurs à vis pour l'alimentation et la sortie signal
Détails de conception :
- U1 gère l'oscillateur à trigger de Schmitt et l'étage intégrateur (génération du carré et de la dent de scie)
- U2 gère la mise en forme du signal sinusoïdal et le buffer de sortie
- Le réseau de diodes (D1–D4) assure la mise en forme du signal sinusoïdal
- Des commutateurs SP3T permettent de sélectionner la forme d'onde et la plage de fréquence
- Conçu et routé sous KiCad, fabriqué via JLCPCB
Photos de résultats
Vous pouvez les trouver aussi dans la dossier Photos-of-final-result.
| Schémas | PCB |
|---|---|
 |  |
[!NOTE] Une Intelligence Artificielle a été utilisée uniquement pour rédiger ce texte README.
Parts
32| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 100k | Potentiometer_THT:Potentiometer_Alpha_RD901F-40-00D_Single_Vertical | R5, R8, R9, R10 |
| 4 | 1N4148 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2, D3, D4 |
| 4 | 470nF | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C4, C5, C6, C7 |
| 2 | 5k1 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3, R7 |
| 2 | TL072IP | 1. Custom Footprints:8-Dip | U1, U2 |
| 1 | 100 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R11 |
| 1 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R4 |
| 1 | 3.3uF | Capacitor_THT:C_Rect_L16.5mm_W7.0mm_P15.00mm_MKT | C1 |
| 1 | 330pF | Capacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mm | C3 |
| 1 | 33nF | Capacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mm | C2 |
| 1 | 47k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R6 |
| 1 | 51k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2 |
| 1 | 68k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | Freq. range | 1. Custom Footprints:Switch SP3T | SW1 |
| 1 | Output | 1. Custom Footprints:Terminal Block 2 pos | J2 |
| 1 | Wave form | 1. Custom Footprints:Switch SP3T | SW2 |
| 1 | ±9V Supply | 1. Custom Footprints:Terminal Block 3 pos | J1 |
The 28 most common of 32 parts.
Similar boards
- 2 layers18.4 × 67.9 mm
Bottom pcb
Testbild-synth/HAGIWO-061-Chord
4hp Eurorack PCB and code for hagiwo 61 - chord vco v2
16 parts8MIT - 2 layers100 × 100 mm
- 2 layers126.4 × 41.3 mm
- 2 layers50 × 23.2 mm
Analog
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
32 parts1kGPL-3.0 - 2 layers136.8 × 54.2 mm
Retropie zero
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
32 parts915 - 2 layers
- 2 layers16 × 20 mm
ESPKey
octosavvi/ESPKey
Wiegand data logger, replay device and micro door-controller
32 parts353GPL-2.0
Questions
How big is the Triple S Generator PCB?
It measures 100 × 60 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Triple S Generator use?
32 parts, built around the TL072IP. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Triple S Generator KiCad files?
From the Abit-byte/Triple-S-Generator repository on GitHub, at the commit this page was made from: the board is Triple-S Generator.kicad_pcb and its schematic Triple-S Generator.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Triple S Generator design in my own project?
Its repository states no licence, so its author keeps all rights: ask Abit-byte before reusing the design.