
SX1276 LORA NODE
laforestlabs/KiCraft
KiCad PCB automation toolkit — placement, routing, scoring, and experiment management
Custom PCB GPS tracker using LoRa wireless communication for long-range asset tracking with low power consumption.
LoRa GPS Tracker is an open-source printed circuit board by Abhi90808, from the Abhi90808/LoRa-GPS-Tracker repository on GitHub. It is a 2-layer board of 49.1 × 63.6 mm with 33 parts on 53 nets, routed with 427 tracks and 23 vias.
It is built around the STM32L051C8T6, AMS1117-3.3 and TP4056. Its parts include 18 capacitors, 5 resistors, 5 connectors, 3 ICs and 1 switch. It belongs with the radio and wireless boards and the STM32 boards of this library.
A custom PCB GPS tracker using LoRa wireless communication for long-range, low-power asset tracking. Designed in KiCad 8, combining a GPS module and LoRa transceiver for remote location reporting.
| Parameter | Value |
|---|---|
| LoRa Module | Ra-02 / RFM95W (SX1278) |
| GPS Module | NEO-6M / NEO-8M |
| Frequency | 433MHz / 868MHz / 915MHz |
| Range | Up to 10km (line of sight) |
| Supply Voltage | 3.3V |
| Interface | SPI (LoRa), UART (GPS) |
| PCB Layers | 2 |
| Designed With | KiCad 8 |
├── Schematic/ # KiCad schematic (.kicad_sch, PDF)
├── PCB/ # PCB layout (.kicad_pcb, .kicad_pro)
├── Gerbers/ # Fabrication files
├── BOM/ # Bill of materials (CSV)
├── 3D/ # 3D model (.step)
└── Images/ # PCB renders and schematic screenshotsThe GPS module sends NMEA sentences via UART to the MCU. The MCU parses the latitude/longitude and transmits it as a LoRa packet. A receiver node (another LoRa module or a LoRaWAN gateway) picks up the packet and logs or displays the location.
| Component | Value | Qty |
|---|---|---|
| LoRa Module | Ra-02 / RFM95W | 1 |
| GPS Module | NEO-6M | 1 |
| MCU | ATmega328p / STM32 | 1 |
| Voltage Regulator | AMS1117-3.3V | 1 |
| Antenna Connector | SMA / u.FL | 1 |
Gerber files are in /Gerbers, ready for JLCPCB, PCBWay, or similar.
This project is licensed under the CERN Open Hardware Licence Version 2 - Strongly Reciprocal (CERN OHL-S v2).
Abhi90808 — GitHub Profile
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 100nf | Capacitor_SMD:C_0402_1005Metric | C2, C4, C6, C8, C9, C10, C12, C15 |
| 5 | 10uf | Capacitor_SMD:C_0805_2012Metric | C1, C3, C5, C7, C11 |
| 5 | 12pf | Capacitor_SMD:C_0402_1005Metric | C13, C14, C16, C17, C18 |
| 2 | 10k | Resistor_SMD:R_0402_1005Metric | R4, R5 |
| 2 | 5.1k | Resistor_SMD:R_0402_1005Metric | R1, R2 |
| 1 | 1.2k | Resistor_SMD:R_0402_1005Metric | R3 |
| 1 | 32.768kHz | Crystal:Crystal_SMD_3215-2Pin_3.2x1.5mm | Y1 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | BATTERY | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | NEO6M_GPS | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | RESET | Button_Switch_SMD:SW_SPST_B3U-1000P | SW1 |
| 1 | STM32L051C8T6 | Package_QFP:LQFP-48_7x7mm_P0.5mm | U3 |
| 1 | SWD_DEBUG | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J5 |
| 1 | SX1276_LORA | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J4 |
| 1 | TP4056 | Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm_ThermalVias | U1 |
| 1 | USB_C | Connector_USB:USB_C_Receptacle_XKB_U262-16XN-4BVC11 | J1 |

laforestlabs/KiCraft
KiCad PCB automation toolkit — placement, routing, scoring, and experiment management

jerry20091103/Teensy_Grovebox
A portable synth and music multi-tool made with Teensy 4.1




DevMubarak1/PidginTranslator
Handheld translator for Nigerian languages. No internet needed for common phrases, YarnGPT for everything else.


skrmsh/skirmish-hardware
Skirmish Hardware © 2022-2023 by Ole Lange is licensed under CC BY-NC-SA 4.0. To view a copy of this license, visit http://creativecommons.org/licenses/by-nc-sa/4.0/
It measures 49.1 × 63.6 mm and has 2 copper layers, 1.6 mm thick.
33 parts, built around the STM32L051C8T6, AMS1117-3.3 and TP4056. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Abhi90808/LoRa-GPS-Tracker repository on GitHub, at the commit this page was made from: the board is lora_gps_tracker.kicad_pcb and its schematic lora_gps_tracker.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Abhi90808 before reusing the design.