
PWM Isolator
EmbeddedDesign/GotT-Translation-Circuit
A Bluetooth voice modulator for Dalek speech

Seriesresonant F24 is an open-source printed circuit board by aakatz3, from the aakatz3/ESE6710-Lab2-Supplemental repository on GitHub. It is a 2-layer board of 75 × 62.3 mm with 45 parts on 17 nets, routed with 132 tracks and 25 vias.
It is built around the SN74LVC1G34DCK, SI8274GB1-IS1 and BSC065N06LS5. Its parts include 19 capacitors, 6 resistors, 5 connectors, 3 ICs and 2 transistors.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 10u | seriesresonant_F19:C1206 | C2, C3, C4, C5, C6, C10, C13, C14, C16, C18 |
| 5 | .1u | seriesresonant_F19:C1206 | C11, C12, C15, C17, C19 |
| 5 | TestPoint_Probe | TestPoint:TestPoint_Keystone_5005-5009_Compact | TP1, TP2, TP3, TP4, TP5 |
| 4 | Conn_01x01_Pin | seriesresonant_F19:DELTRON_571-0500_0 | J3, J4, J5, J6 |
| 4 | MOUNT-PAD-ROUND3.0 | seriesresonant_F19:3,0-PAD | H1, H2, H3, H4 |
| 3 | R1206 | seriesresonant_F19:R1206 | R4, R5, R6 |
| 2 | 1k5 | seriesresonant_F19:R0603 | R2, R3 |
| 2 | BSC065N06LS5 | seriesresonant_F19:TDSON-8 | Q1, Q2 |
| 2 | CNP1812 | seriesresonant_F19:C1812 | C7, C8 |
| 1 | 0.1u | seriesresonant_F19:C1206 | C9 |
| 1 | 100u | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | C1 |
| 1 | 1k | seriesresonant_F19:R1206 | R1 |
| 1 | ADUM5028 | Package_SO:SOIC-8_7.5x5.85mm_P1.27mm | U2 |
| 1 | BN35N61 | Connector_Coaxial:BNC_Amphenol_B6252HB-NPP3G-50_Horizontal | X1 |
| 1 | SI8274GB1-IS1 | seriesresonant_F19:SOIC16NB | U3 |
| 1 | SN74LVC1G34 | seriesresonant_F19:SOT-23(5) | U1 |
| 1 | TERMINAL_BLOCK_17A | seriesresonant_F19:TERMINAL_BLOCK_17A | P3 |

EmbeddedDesign/GotT-Translation-Circuit
A Bluetooth voice modulator for Dalek speech


imchipwood/dumbpad
Simple 4x4 numpad with rotary encoder. Powered by QMK via ATmega32u4 Pro Micro


makeo/PicoLoader
A cheap and easy to install modchip for the Nintendo GameCube!


peterkrull/quad
Firmware, hardware and documentation for my autonomous quad copter project

tebl/RC6502-Apple-1-Replica
An expandable SBC-version of the Apple 1 computer, easy to get started with and lot of cool stuff that can be added to it!
It measures 75 × 62.3 mm and has 2 copper layers, 1.6 mm thick.
45 parts, built around the SN74LVC1G34DCK, SI8274GB1-IS1 and BSC065N06LS5. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the aakatz3/ESE6710-Lab2-Supplemental repository on GitHub, at the commit this page was made from: the board is KiCad/Lab2/seriesresonant_F24.kicad_pcb and its schematic KiCad/Lab2/seriesresonant_F24.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask aakatz3 before reusing the design.