2 layers98 × 27 mm
2 layers
KicadProject1
aaa8300/catPCBMaterials: - 1 battery - 2 resistors - 2 LEDs - wires
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 5
- Nets
- 4
- Pads
- 11
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 31 May 2025
- Updated
- 31 May 2025
Overview
KicadProject1 is an open-source printed circuit board by aaa8300, from the aaa8300/catPCB repository on GitHub. It is a 2-layer board with 5 parts on 4 nets.
Its parts include 2 resistors and 2 diodes.
README
README.mdcatPCB
This is a printed cirtuit board (PCB) in the form of a cat keychain made for Hack Club's Solder program.
Materials:
- 1 battery
- 2 resistors
- 2 LEDs
- wires
schematic:
PCB:
3D board:
Slack username: Ana
Parts
5| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | LED | LED_THT:LED_D5.0mm | D1, D2 |
| 1 | Battery_Cell | Battery:BatteryHolder_Keystone_3034_1x20mm | BT1 |
| 1 | R | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R2 |
| 1 | R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
Questions
What parts does the KicadProject1 use?
5 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the KicadProject1 KiCad files?
From the aaa8300/catPCB repository on GitHub, at the commit this page was made from: the board is kicadProject1.kicad_pcb and its schematic kicadProject1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the KicadProject1 design in my own project?
Its repository states no licence, so its author keeps all rights: ask aaa8300 before reusing the design.
Similar boards
- 2 layers21 × 33 mm
24g2usb pico2w
joypad-ai/joypad-os
Universal controller firmware for building adapters, dongles, and custom controllers.
5 parts1.7kApache-2.0 - 2 layers53.2 × 59.6 mm
A10 OLinuXino Lime Rev B SHIELD TEMPLATE
OLIMEX/OLINUXINO
OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C
5 parts1.5k - 2 layers30 × 11 mm
Main control board servo tester
jamro/tiny-engineer
A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.
5 parts1.1k - 2 layers78.8 × 35.3 mm
KiCadTest
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
5 parts915 - 2 layers50 × 23 mm
- 2 layers43.2 × 28.5 mm
- 2 layers20.3 × 15.2 mm
L0 light sensor
Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.
5 parts546MIT