
Stm32f0-can mini breakout
NerdyProjects/HouseBusNode
(Yet another) house bus hardware based on STM32F072 and the CAN bus

Power switch is an open-source printed circuit board by a-v-s, from the a-v-s/wireless_ac_power_switch repository on GitHub. It is a 2-layer board of 56.6 × 85.1 mm with 52 parts on 64 nets, routed with 382 tracks and 98 vias.
It is built around the BT138-800E, HLK-PM01 and AT24CS01-SSHM-B, with the MOC3063M and 10D561K among its other parts. Its parts include 14 capacitors, 12 resistors, 10 ICs, 3 connectors and 2 switches. It belongs with the STM32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | C_Small | Capacitor_SMD:C_0805_2012Metric | C3, C4, C6, C7, C8, C9, C10, C11, C12, C13 |
| 4 | 10K | Resistor_SMD:R_0805_2012Metric | R8, R9, R11, R12 |
| 4 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | H1, H2, H3, H4 |
| 2 | 330R | Resistor_SMD:R_0805_2012Metric | R1, R5 |
| 2 | 330R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2, R3 |
| 2 | R_Small | Resistor_SMD:R_0805_2012Metric | R6, R7 |
| 2 | SW_Push | AvS_Button:TS-1187 | SW1, SW2 |
| 1 | 100R | Resistor_SMD:R_0805_2012Metric | R10 |
| 1 | 10D561K | Varistor:RV_Disc_D12mm_W4.6mm_P7.5mm | RV1 |
| 1 | 15 nF | Capacitor_THT:C_Rect_L11.0mm_W4.2mm_P10.00mm_MKT | C5 |
| 1 | 220uF | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C2 |
| 1 | 39R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4 |
| 1 | 4u7 | Capacitor_SMD:C_0805_2012Metric | C14 |
| 1 | AP2127N-3.3 | Package_TO_SOT_SMD:SOT-23 | U3 |
| 1 | AT24CS01-SSHM | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U5 |
| 1 | Antenna | TestPoint:TestPoint_THTPad_D2.0mm_Drill1.0mm | AE1 |
| 1 | BT138-800 | Package_TO_SOT_THT:TO-220-3_Vertical | Q1 |
| 1 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | Conn_02x05_Odd_Even | Connector_PinHeader_1.27mm:PinHeader_2x05_P1.27mm_Vertical_SMD | J2 |
| 1 | Filter_EMI_CommonMode | AvS_Inductor:CommonModeChoke_PDMCAT1386 | FL1 |
| 1 | Fuse_Small | Fuse:Fuseholder_Cylinder-5x20mm_Stelvio-Kontek_PTF78_Horizontal_Open | F1 |
| 1 | HLK-PM01 | AvS_ACDC:Converter_ACDC_CombinedFootprint | PS1 |
| 1 | LED | LED_SMD:LED_0805_2012Metric | D1 |
| 1 | LM75B | Package_SO:SO-8_3.9x4.9mm_P1.27mm | U7 |
| 1 | MOC3063M | Package_DIP:DIP-6_W7.62mm_Socket | U2 |
| 1 | MOD_BH1750 | AvS_Modules:MOD_BH1750 | U8 |
| 1 | MOD_OLED_I2C | AvS_Modules:MOD_OLED_I2C_128x64_0.96 | U9 |
| 1 | RFM69HCW | RF_Module:HOPERF_RFM9XW_SMD | U4 |
| 1 | STM32F103C8Tx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | Screw_Terminal_01x03 | TerminalBlock:TerminalBlock_bornier-3_P5.08mm | J1 |
| 1 | TSOP348xx | OptoDevice:Vishay_MOLD-3Pin | U11 |
| 1 | X 100nF | Capacitor_THT:C_Rect_L13.0mm_W6.0mm_P10.00mm_FKS3_FKP3_MKS4 | C1 |
| 1 | ~ | AvS_Sensor:IRM-H6XXT-TR2 | U10 |

NerdyProjects/HouseBusNode
(Yet another) house bus hardware based on STM32F072 and the CAN bus

yabo104/Electric_Door_With_ESP32_S3
This proyeject contains a hardware/firmware development for an electric door controller.

milar111/HEAT
An open-source STM32 SMD assembly station for precision soldering. Uses a custom Smart Pulse & Coast algorithm to drive 400W mains heaters via SSR. Features OLED UI, NTC feedback, and safety cooling.





NguyenThanhHuy-debug/PCB-Liquid-Dispensing-Cabinet
PCB-Liquid-Dispensing-Cabinet — a software project built with modern tooling.
It measures 56.6 × 85.1 mm and has 2 copper layers, 1.6 mm thick.
52 parts, built around the BT138-800E, HLK-PM01, AT24CS01-SSHM-B and MOC3063M. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the a-v-s/wireless_ac_power_switch repository on GitHub, at the commit this page was made from: the board is power_switch.kicad_pcb and its schematic mcu.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask a-v-s before reusing the design.