
Aaronjamt Framework IR Module
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

PCIe breakout for Dell Latitude laptop optical drive modular bay
DellModuleBay is an open-source printed circuit board by a-little-wifi, from the a-little-wifi/oddPCIe repository on GitHub. It is a 4-layer board of 30.4 × 45.5 mm with 39 parts on 63 nets, routed with 232 tracks and 55 vias.
Its parts include 7 capacitors, 3 connectors, 2 resistors, 2 diodes and 1 IC. It belongs with the computers and single-board computers and interfaces and adapters boards of this library.
PCIe + M.2 SATA breakout for Dell Latitude laptop optical drive modular bay
The optical drive (odd) SATA ports on a number of Dell Latitude laptops from 2011-2013 have a PCIe x1 lane hidden in them, meant for use with the AE3USB01 (DP/N P5MKF) USB 3.0 expansion module:
Optical bay port in an E6420, note the second row of pins
Note: The E6440, E6540 and M2800 don't seem to support hot-plug on this PCIe port, as they never actually shipped with anything using this port (the AE3USB01's bezel doesn't even line up with the case)
oddPCIe plugged in to 2 different laptops, showing the fit
3.3V regulator power led lighting up
This board has been manufactured and tested working
PCIe port only active if CLKREQ pad is connected to ground
SATA power only active if PRES pad is connected to ground

| Qty | Value | Footprint | References |
|---|---|---|---|
| 14 | LOGO | DellModuleBay:amogus | G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G*** |
| 5 | 100nF | Capacitor_SMD:C_0805_2012Metric | C3, C4, C5, C6, C7 |
| 2 | 100uF | Capacitor_SMD:C_0805_2012Metric | C1, C2 |
| 2 | 5K1 | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 2 | LED | Diode_SMD:D_0805_2012Metric | D1, D2 |
| 1 | AP1117-33 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | Bus_M.2_Socket_M | DellModuleBay:m-key | J1 |
| 1 | CLKREQ# | TestPoint:TestPoint_Pad_D1.5mm | TP6 |
| 1 | HPD | TestPoint:TestPoint_Pad_D1.5mm | TP3 |
| 1 | MFG | TestPoint:TestPoint_Pad_D1.5mm | TP2 |
| 1 | OddPCIe | DellModuleBay:OddPCIe | J2 |
| 1 | PRES | TestPoint:TestPoint_Pad_D1.5mm | TP1 |
| 1 | SMB_CLK | TestPoint:TestPoint_Pad_D1.5mm | TP4 |
| 1 | SMB_DATA | TestPoint:TestPoint_Pad_D1.5mm | TP5 |
| 1 | USB3_A | DellModuleBay:susb3 | J3 |
The 35 most common of 39 parts.

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

jpconstantineau/NRF52-Board
This Repository is a collection of NRF5x boards.

i2cjak/Framework_Expansion_Cards
In which i2cjak creates a new expansion card design every day until he is given a NICE Framework laptop


OpenServoCore/open-servo-core
The goal of this project is to create an open servo controller board and firmware.

axiometa/BrodBoost-PD
Breadboard Powersupply with Power Delivery. Available Voltages 20,15,12,9,5. Based on CYPD3177 Chip

festlv/mso5000-logic-probe
Cheap logic probe for Rigol MSO5000-series oscilloscopes

oresat/oresat-gps-hardware
Hardware for OreSat's SDR GPS receive and other SDR GPS projects
It measures 30.4 × 45.5 mm and has 4 copper layers, 4.69 mm thick.
39 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the a-little-wifi/oddPCIe repository on GitHub, at the commit this page was made from: the board is DellModuleBay/DellModuleBay.kicad_pcb and its schematic DellModuleBay/DellModuleBay.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask a-little-wifi before reusing the design.