

Main PCB 002
OnBoard Aviation Navigation Lights
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 130
- Nets
- 87
- Pads
- 335
- Tracks, vias
- 192, 4
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 10 Apr 2022
- Updated
- 26 Nov 2024
Overview
Main PCB 002 is an open-source printed circuit board by ZoAndr, from the ZoAndr/BANO4 repository on GitHub. It is a 2-layer board with 130 parts on 87 nets, routed with 192 tracks and 4 vias.
It is built around the LM5164DDA, L6388ED and SI7489DP-T1-E3, with the HSMW-C191-U0000, BSS123 and DMT10H009LK3-13 among its other parts. Its parts include 54 diodes, 40 resistors, 16 capacitors, 9 transistors and 6 ICs. It belongs with the STM32 boards of this library.
Main components
7LM5164DDA
SOIC8100-V Input, 1-A Synchronous Buck DC/DC Converter with Ultra-low IQTexas InstrumentsUncategorisedL6388ED
SO-8-45℃~+125℃ 17V 2 350uA 400mA 40ns 650mA 70ns Half-Bridge IGBT、MOSFET Under Voltage Protection SO-8 Gate Drivers ROHSSTMicroelectronicsGate DriversSI7489DP-T1-E3
PowerPAK-SO-8-55℃~+150℃ 1 P-Channel 100V 175pF 230pF 28A 3V 4.6nF 47mΩ@4.5V 54nC@4.5V、106nC@10V 83W P-Channel PowerPAK-SO-8 MOSFETs ROHSVishay IntertechnologyMOSFETsHSMW-C191-U0000
0603140° 20mA 3.4V 950mcd White 0603 LED Indication - Discrete ROHSBroadcom LimitedLED Indication - DiscreteBSS123
SOT-23-55℃~+150℃ 1 N-channel 1.4V 1.4nC@10V 100V 170mA 22pF 2pF 3.5pF 680mW 6Ω@10V、10Ω@4.5V N-Channel SOT-23 MOSFETs ROHShongjiachengMOSFETsDMT10H009LK3-13
TO-252(DPAK)MOSFETsDiodes IncorporatedSWPA4030S1R0NT
SMD,4x4mm18mΩ 1uH 4.15A 5.7A ±30% SMD,4x4mm Power Inductors ROHSSunlordPower Inductors
README
README.mdBANO4
OnBoard Aviation Navigation Lights
Parts
130| Qty | Value | Footprint | References |
|---|---|---|---|
| 39 | R | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R1, R2, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20, R21, R22, R23 +23 |
| 26 | HSMW-C191-U0000 | ul_HSMW-C191-U0000:LED_91-U0000 | LED1, LED2, LED10, LED11, LED12, LED13, LED14, LED15, LED16, LED17, LED18, LED19, LED20, LED21, LED22, LED23 +10 |
| 26 | WireHole_1p5 | Wire_holes:WireHole_1p2 | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D20, D21, D22, D23, D24 +10 |
| 5 | BSS123 | Package_TO_SOT_SMD:SOT-23 | Q6, Q7, Q8, Q10, Q11 |
| 5 | C | Capacitor_SMD:C_0805_2012Metric | C1, C3, C6, C9, C13 |
| 5 | C | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C8, C10, C11, C12, C14 |
| 4 | C | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C4, C5, C7, C16 |
| 4 | DMT10H009LK3-13 | ul_DMT10H009LK3-13:QPMOS1G2S3D_TO252_DIO | Q1, Q2, Q3, Q4 |
| 3 | L6388ED | ul_L6388ED:SO-8_STM | CR1, CR2, CR3 |
| 2 | LM5164DDA | Package_SO:HSOP-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.1mm_ThermalVias | U2, U3 |
| 2 | SWPA4030S1R0NT | ul_VLS252012HBU-220M:IND_VLS252012_TDK | L1, L2 |
| 2 | TLV9061IDCKR | ul_TLV9061IDCKR:DCK5_TEX | U1, U5 |
| 1 | BLM18KG102SH1D | ul_BLM18KG102SH1D:RES_0603_1P6XP8_MUR | R5 |
| 1 | BZT52Bxx | Diode_SMD:D_SOD-123F | D19 |
| 1 | C | Capacitor_SMD:C_0402_1005Metric | C15 |
| 1 | C | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2 |
| 1 | MM5Zxx | Diode_SMD:D_SOD-523 | D5 |
| 1 | SI7489DP-T1-E3 | ul_SI7852DP-T1:POWERPAK_SO-8_SINGLE_VIS | U4 |
| 1 | STM32G031G8Ux | Package_DFN_QFN:QFN-28_4x4mm_P0.5mm | U6 |
More from ZoAndr/BANO4
5- 4 layers52.4 × 14.4 mm

- 4 layers55 × 10 mm

- 2 layers17 × 25 mm

- 2 layers56.9 × 5.5 mm

- 2 layers17 × 5 mm

Similar boards
- 6 layers100.5 × 101.5 mm

Custom ESC
0BitsnBytes/McQueen
an overpowered rc car that poses a danger to my safety :)
192 parts1GPL-3.0 - 4 layers66 × 36 mm

Gas sensor
JamesTwallin/gas_sensor
A tiny plug-in board for the rev E phone-companion board. It stands upright in a notch in rev E's sensor end, between the two gas sensor cans, and pokes 4.5 mm out through a slot in the case face, so its tip sits in the…
81 parts7MIT - 4 layers

Sensei puck
PaoloJN/sensei-puck
Drop-in BLE water sensor puck. College proof of concept, archived before the first board order.
122 parts - 4 layers69 × 39 mm

JPBms2
jakepoz/jpbms
JPBms is a simple BMS for solar charging and balancing a 3-cell lithium ion battery.
132 parts2 - 2 layers

- 2 layers32.2 × 69.6 mm

HBM G0VH4C5
Omar-Magdy0/ForgeDriveHW
ForgeDrive is an open-source research and development platform for modular, scalable, and industrial-inspired systems.
39 partsMIT - 4 layers108.2 × 67.3 mm

- 8 layers72 × 50 mm

OpenMD
CrabLabsLLC/OpenMD
An Open Source Versatile Motor Driver powered by GaN
220 parts156CERN-OHL-W-2.0
Questions
What parts does the Main PCB 002 use?
130 parts, built around the LM5164DDA, L6388ED, SI7489DP-T1-E3 and HSMW-C191-U0000. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Main PCB 002 KiCad files?
From the ZoAndr/BANO4 repository on GitHub, at the commit this page was made from: the board is MUZ_001/Main_PCB_002.kicad_pcb and its schematic BANO_StepDown_LM5160_Control_Module/Main_PCB_002.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Main PCB 002 design in my own project?
Its repository states no licence, so its author keeps all rights: ask ZoAndr before reusing the design.