
DockPD
Zipra1/SlimeNRF-Fuimini
Supermini-based trackers for nRF flavoured SlimeVR body trackers.

Supermini-based trackers for nRF flavoured SlimeVR body trackers.
SV4 ICM is an open-source printed circuit board by Zipra1, from the Zipra1/SlimeNRF-Fuimini repository on GitHub. It is a 2-layer board of 17.8 × 28 mm with 14 parts on 20 nets, routed with 129 tracks and 11 vias.
It is built around the ICM-42688-P, K3-1295S-E1 and CC0603KRX7R9BB104. Its parts include 3 capacitors, 3 ICs, 1 switch and 1 crystal. It belongs with the nRF52 and nRF5x boards of this library.
The dock uses a "treedix" USB C breakout board instead of a custom PCB for the USB C, as I am not planning to make a large enough volume to justify having a separate b oard with USB C.
The dock is made of several individual PCB's so that they can be slanted in the dock, making it better for mounting on wall (even though really they'd be fine, it looks nicer like that)
Design is not final. I might abandon the slant idea if it's not worth it.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 100nF | Capacitor_SMD:C_0402_1005Metric | C3, C4, C8 |
| 2 | BCon | justPads_custom:2_4-1.5_3.5_1 | TP1, TP2 |
| 2 | LOGO | LOGO | G***, G*** |
| 1 | GT-TC020B-H035-L05 | buttons_custom:GT-TC020B-H035-L05 | S1 |
| 1 | ICM-42688-P | imu_custom:ICM-42688-P | U2 |
| 1 | K3-1295S-E1 | buttons_custom:K3-1295S-E1 | U4 |
| 1 | SuperMini nRF52840 | mcu_custom:SuperMini_nRF52840_AH_USBdn | U1 |
| 1 | ~ | oscillator_custom:OK252032.768KJBA4SL | X1 |
The 12 most common of 14 parts.

Zipra1/SlimeNRF-Fuimini
Supermini-based trackers for nRF flavoured SlimeVR body trackers.

Zipra1/SlimeNRF-Fuimini
Supermini-based trackers for nRF flavoured SlimeVR body trackers.

sbbxiii/The-Eagle
The Eagle: Custom STM32F405 4-Layer Autonomous Avionics Flight Controller PCB

ara-mkr/f405-flight-controller
This is a flight controller I designed as a side project. It was fun and pretty challenging, and I'm planning to build a drone with it at some point!

will127534/OneInchEye
A One Inch CMOS sensor (IMX283) camera board designed for Raspberry Pi


rishikesh2715/STM32F7_FC
STM32F722RET6 Based Flight Controller with ICM-42688-P IMU, BMP388 Barometer, and much more!

fdiwth/tvc-drone
This repository contains the documentation, hardware designs, and source code for a Thrust Vector Control (TVC) drone.

will127534/GlobalEye
A simple camera board using GMAX3412 1" 4K@30fps global shutter sensor

Open-Muscle/OpenMuscle-FlexGrid
60-sensor wearable with flexible PCB and pressure matrix
It measures 17.8 × 28 mm and has 2 copper layers, 0.8 mm thick.
14 parts, built around the ICM-42688-P, K3-1295S-E1 and CC0603KRX7R9BB104. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Zipra1/SlimeNRF-Fuimini repository on GitHub, at the commit this page was made from: the board is Tracker/ICM-42688-P PCB/SV4_ICM.kicad_pcb and its schematic Dock/Dock PCB Female PD/DockPD/DockPD.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Zipra1 before reusing the design.