2 layers100 × 52 mm
2 layers210 × 176 mm
Fonte 18V panel
ZeniteSolar/MFP19Fonte Principal de 18V
- Size
- 210 × 176 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 210
- Nets
- 15
- Pads
- 660
- Tracks, vias
- 1,446, 66
- Pours
- 12
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 28 Mar 2019
- Updated
- 15 Sep 2020
Overview
Fonte 18V panel is an open-source printed circuit board by ZeniteSolar, from the ZeniteSolar/MFP19 repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 210 × 176 mm with 210 parts on 15 nets, routed with 1,446 tracks and 66 vias.
It is built around the MBR20200CTG and SI2308CDS. Its parts include 36 resistors, 24 connectors, 12 diodes, 6 ICs and 6 transistors. It belongs with the power boards of this library.
Main components
2README
README.mdMFP19
Módulo da Fonte Principal 2019
Embarcação Guarapuvu II
Equipe Zênite Solar
Sobre
Este módulo é responsável por fornecer uma tensao fixa e estavel de 18V para alimentaçao dos modulos que estao na rede CAN
Requisitos e Abordagens
- Fornecer tensao estavel de 18V
- Manter a tensao estavel independente da carga (até 3A)
- Baixo ripple
- Ser robusta
- Nao queimar por curto-circuito
- Nao queimar por sobre temperatura
- Nao queimar por sobre-carga
- Resistencia por ruido eletromagnetico e eletrico causados pelos componentes do sistema (motor,MCC...)
- Eficiencia energetica. -Conversor estatico DC/DC chaveado
- Facilitar o diagnóstico
- Utilizar LEDs
CI Ultilizado: Conversor LMR16030 Datasheet
%20-%20lmr16030%20pdf.png?raw=true)
Projeto do Indutor
-seleção do indutor de saida:
Parts
210| Qty | Value | Footprint | References |
|---|---|---|---|
| 24 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H1, H1, H1, H1, H1, H2, H2, H2, H2, H2, H2, H3, H3, H3, H3 +8 |
| 18 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | CBoot1, CBoot1, CBoot1, CBoot1, CBoot1, CBoot1, Cin2, Cin2, Cin2, Cin2, Cin2, Cin2, Cin3, Cin3, Cin3, Cin3 +2 |
| 12 | 10u | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | Ci1, Ci1, Ci1, Ci1, Ci1, Ci1, Ci2, Ci2, Ci2, Ci2, Ci2, Ci2 |
| 12 | 47u | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | Co1, Co1, Co1, Co1, Co1, Co1, Co2, Co2, Co2, Co2, Co2, Co2 |
| 12 | MSTBA | Connector_Phoenix_MSTB:PhoenixContact_MSTBA_2,5_2-G-5,08_1x02_P5.08mm_Horizontal | J1, J1, J1, J1, J1, J1, J2, J2, J2, J2, J2, J2 |
| 12 | RJ45_Shielded | MFP19RJ45:RJ45_YH59_01 | J3, J3, J3, J3, J3, J3, J4, J4, J4, J4, J4, J4 |
| 6 | 0.1u | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | Co4, Co4, Co4, Co4, Co4, Co4 |
| 6 | 100 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R2, R2, R2, R2, R2, R2 |
| 6 | 100K | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R4, R4, R4, R4, R4, R4 |
| 6 | 100n | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | Cs1, Cs1, Cs1, Cs1, Cs1, Cs1 |
| 6 | 100uH | Inductor_THT:L_Radial_D21.0mm_P19.00mm | L1, L1, L1, L1, L1, L1 |
| 6 | 10K | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R5, R5, R5, R5, R5, R5 |
| 6 | 1k5 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | RLed1, RLed1, RLed1, RLed1, RLed1, RLed1 |
| 6 | 220K | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R3, R3, R3, R3, R3, R3 |
| 6 | 230k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | Rfbt2, Rfbt2, Rfbt2, Rfbt2, Rfbt2, Rfbt2 |
| 6 | 2A | KicadZeniteSolarLibrary18:Fuse_Holder_5x20 | F1, F1, F1, F1, F1, F1 |
| 6 | 2k2 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | Rs1, Rs1, Rs1, Rs1, Rs1, Rs1 |
| 6 | 47k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1, R1, R1, R1, R1, R1 |
| 6 | 8k2 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | Rfbb1, Rfbb1, Rfbb1, Rfbb1, Rfbb1, Rfbb1 |
| 6 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | Led1, Led1, Led1, Led1, Led1, Led1 |
| 6 | LMR16030 | Package_SO:Texas_R-PDSO-G8_EP2.95x4.9mm_Mask2.4x3.1mm_ThermalVias | U1, U1, U1, U1, U1, U1 |
| 6 | MBR20200CTG | Package_TO_SOT_THT:TO-220-3_Horizontal_TabDown_SMD | D1, D1, D1, D1, D1, D1 |
| 6 | NA | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R6, R6, R6, R6, R6, R6 |
| 6 | Si2308CDS | Package_TO_SOT_SMD:SOT-23 | Q1, Q1, Q1, Q1, Q1, Q1 |
| 6 | na | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | Cff1, Cff1, Cff1, Cff1, Cff1, Cff1 |
| 6 | o.1u | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | Co3, Co3, Co3, Co3, Co3, Co3 |
More from ZeniteSolar/MFP19
1Similar boards
- 2 layers140 × 178.7 mm
- 2 layers89.6 × 52 mm
- 2 layers130 × 80 mm
- 2 layers240 × 70 mm
Infinitas
freeDSP/freeDSP-INFINITAS
USB Audio Class 2 compliant audio interface with up to 32 input and up to 32 output channels and optional ADAU1452 DSP.
210 parts35 - 2 layers101.3 × 108.5 mm
- 2 layers286.1 × 96.2 mm
- 2 layers150 × 86.9 mm
HDSEMG
node9909/Graduation-project-files
design of a HD-SEMG system, using ads1298, Arduino DUE, ST32F4, INA333 adn AD8232
210 parts10 - 2 layers183 × 128.7 mm
Questions
How big is the Fonte 18V panel PCB?
It measures 210 × 176 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Fonte 18V panel use?
210 parts, built around the MBR20200CTG and SI2308CDS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Fonte 18V panel KiCad files?
From the ZeniteSolar/MFP19 repository on GitHub, at the commit this page was made from: the board is fonte_18V_panel.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Fonte 18V panel design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).