
ReCamera S101 v1.0
Seeed-Studio/OSHW-reCamera-Series
reCamera is a series of open-source AI cameras.

Collection of independent engineering projects focused on RF systems, satellite communications, DSP, embedded systems, FPGA development, and scientific computing.
Daya board is an open-source printed circuit board by Zachmau5, from the Zachmau5/engineering_portfolio repository on GitHub. It is a 4-layer board of 200 × 123 mm with 90 parts on 95 nets, routed with 357 tracks and 24 vias.
Its parts include 40 resistors, 17 switches, 14 diodes, 8 transistors and 2 capacitors. It belongs with the radio and wireless and fPGA and programmable logic boards and the RP2040 boards of this library.
Technical portfolio containing non-proprietary engineering projects focused on RF systems, satellite communications, DSP, embedded systems, FPGA development, scientific computing, and aerospace-related software development. The projects in this repository were developed through undergraduate electrical engineering research, independent technical work, and hands-on experimentation with real-world hardware and software systems.
/amsat-ground-station
Portable SDR-based amateur satellite tracking and ground station system
/kicad_projects
Dump of personal KiCad designs and documents
---
# Featured Project – AMSAT Portable Ground Station
A portable dual-band amateur satellite ground station integrating:
- Automated antenna tracking
- Real-time orbit propagation
- SDR hardware integration
- RF subsystem analysis
- Autonomous azimuth/elevation control
- GUI-based visualization and tracking
- Satellite pass prediction
- Coordinate transformation pipelines
- Real-time tracking-control algorithms
## Key Technologies| Qty | Value | Footprint | References |
|---|---|---|---|
| 14 | LED | B2B_XH_A (1):JST_B2B-XH-A | D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12, D13, D14 |
| 10 | SW_Push | B2B_XH_A (1):JST_B2B-XH-A | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8, SW15, SW16 |
| 9 | 100 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R32, R33, R34, R35, R36, R37, R38, R39, R40 |
| 9 | 100k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2, R4, R6, R8, R10, R12, R14, R16, R23 |
| 8 | 2N7002 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8 |
| 8 | 4.7k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R24, R25, R26, R27, R28, R29, R30, R31 |
| 6 | 330 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R17, R18, R19, R20, R21, R22 |
| 6 | SW_DIP_x01 | B2B_XH_A (1):JST_B2B-XH-A | SW9, SW10, SW11, SW12, SW13, SW14 |
| 5 | 0 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R3, R7, R9, R11 |
| 2 | Conn_01x14_Socket | Connector_PinHeader_2.54mm:PinHeader_1x16_P2.54mm_Vertical | J2-FX1, J3-FX2 |
| 2 | NetTie_2 | NetTie:NetTie-2_THT_Pad0.3mm | NT1, NT2 |
| 2 | R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R5, R15 |
| 1 | 0.1 uF | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P2.50mm | C2 |
| 1 | 470 uF | Capacitor_THT:CP_Radial_D8.0mm_P5.00mm | C1 |
| 1 | Note 1 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R13 |
| 1 | RaspberryPi_Pico | Module:RaspberryPi_Pico_SMD_HandSolder | A1 |
| 1 | SW_SPDT | Button_Switch_THT:SW_Slide-03_Wuerth-WS-SLTV_10x2.5x6.4_P2.54mm | SW17 |
The 86 most common of 90 parts.

Seeed-Studio/OSHW-reCamera-Series
reCamera is a series of open-source AI cameras.

pms67/LittleBrain-STM32F4-Sensorboard
STM32F4-based PCB interfacing with a variety of sensors.

CRImier/MyKiCad
My KiCad boards. Can't be bothered uploading individually anymore, so here you go.


New-England-Weather-Balloon-Society/Tiny4FSK
Horus Binary v2 HAB Tracker


andreika-git/hellen-one
Hellen-One Hardware Platform for rusEFI Engine Management System

VIPQualityPost/aioli-foc
Small, simple closed loop BLDC driver implementing SimpleFOC
It measures 200 × 123 mm and has 4 copper layers, 1.6 mm thick.
90 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Zachmau5/engineering_portfolio repository on GitHub, at the commit this page was made from: the board is kicad/daya_board/daya_board.kicad_pcb and its schematic kicad/daya_board/daya_board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Zachmau5 before reusing the design.