
DC Offset Amp
rhit-gardneml/Macrophthalmus
"# Macrophthalmus" This is an ece capstone team at rose-hulman makeing a communication module for LEO communication

CQ DE BH9DWE! Elecraft is a famous amateur radio manufacturer but its rather expensive to afford. These days I tried to read and understood the original equipment Elecraft K1's principle and managed to modify it. So I push the PCB files to my GitHub and share it to all HAMs.
Elecraft K1 Remake is an open-source printed circuit board by Yurihou, from the Yurihou/BY1QH_K1_Remake repository on GitHub. It is a 2-layer board of 73.7 × 99.1 mm with 114 parts on 65 nets, routed with 419 tracks and 1 via.
It is built around the LM380N-8, MC1350P and S9018. Its parts include 42 capacitors, 23 resistors, 14 connectors, 7 ICs and 7 diodes.
CQ DE BH9DWE! Elecraft is a famous amateur radio manufacturer but its rather expensive to afford. These days I tried to read and understood the original equipment Elecraft K1's principle and managed to modify it. So I push the PCB files to my GitHub and share it to all HAMs.
Firstly I read the manual and understood the schematic diagram of K1, found some components, such as JFET J309, is not available in online shopping network. So I modified the design a little bit. Then I bought and soldered the components of receiver of K1 on the board. After a series of debugging, I managed to make the circuit receiving CW signals on amateur bands. The testing video refers to https://www.bilibili.com/video/BV1d5411i7so
The receiver is succeed in receiving but there is still some problems such as amplifier noise, RF filter attenuation and frequency drift, so I tried to draw the circuit into PCB. If the PCB version works well, I will continue adding functions and modifying design to improve its performance, such as adding frequency display, PLL, multi-band filter and band controller, transmitter, SSB module, antenna tuneing unit and so on.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | .01u | Capacitor_THT:C_Disc_D5.1mm_W3.2mm_P5.00mm | C6, C9, C22, C24, C29, C32, C34, C36 |
| 7 | 100k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2, R3, R15, R16, R17, R19, R23 |
| 7 | 4.915MHz | Crystal:Crystal_HC49-U_Vertical | Y1, Y2, Y3, Y4, Y5, Y6, Y7 |
| 6 | Conn_01x01 | MountingHole:MountingHole_3.2mm_M3_ISO14580_Pad | J6, J7, J8, J11, J12, J13 |
| 5 | 1000 | Capacitor_THT:C_Disc_D5.1mm_W3.2mm_P5.00mm | C8, C11, C12, C16, C17 |
| 5 | 220 | Capacitor_THT:C_Disc_D5.1mm_W3.2mm_P5.00mm | C5, C7, C23, C25, C30 |
| 5 | ISV149 | Package_TO_SOT_THT:TO-92-2 | D1, D2, D3, D4, D7 |
| 4 | 0.47u | Capacitor_THT:C_Disc_D5.1mm_W3.2mm_P5.00mm | C15, C27, C33, C39 |
| 4 | 10u | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C4, C10, C14, C19 |
| 3 | 100k | Connector_JST:JST_XH_S3B-XH-A_1x03_P2.50mm_Horizontal | RV1, RV2, RV3 |
| 3 | 2.7k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R12, R14, R18 |
| 3 | 27k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R9, R10, R13 |
| 3 | 2N3904 | Package_TO_SOT_THT:TO-92_Inline | Q3, Q5, Q6 |
| 3 | SA602 | Package_DIP:DIP-8_W7.62mm_Socket | U2, U5, U7 |
| 2 | .047u | Capacitor_THT:C_Disc_D5.1mm_W3.2mm_P5.00mm | C1, C20 |
| 2 | 0.1u | Capacitor_THT:C_Disc_D5.1mm_W3.2mm_P5.00mm | C2, C3 |
| 2 | 100 | Capacitor_THT:C_Disc_D5.1mm_W3.2mm_P5.00mm | C26, C37 |
| 2 | 1N4148 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D5, D6 |
| 2 | 220u | Capacitor_THT:CP_Radial_D8.0mm_P2.50mm | C18, C21 |
| 2 | 39 | Capacitor_THT:C_Disc_D5.1mm_W3.2mm_P5.00mm | C28, C31 |
| 2 | 47u | Inductor_THT:L_Axial_L7.0mm_D3.3mm_P12.70mm_Horizontal_Fastron_MICC | L1, L3 |
| 2 | 51k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R4, R5 |
| 2 | L78L05_TO92 | Package_TO_SOT_THT:TO-92_Inline | U1, U4 |
| 1 | 1.5 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R11 |
| 1 | 10 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R8 |
| 1 | 180 | Capacitor_THT:C_Disc_D5.1mm_W3.2mm_P5.00mm | C35 |
| 1 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R6 |
| 1 | 2.2u | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C38 |
| 1 | 22 | Capacitor_THT:C_Disc_D5.1mm_W3.2mm_P5.00mm | C40 |
| 1 | 22u | Capacitor_THT:CP_Radial_D8.0mm_P2.50mm | C13 |
| 1 | 2N3906 | Package_TO_SOT_THT:TO-92_Inline | Q4 |
| 1 | 2N7000 | Package_TO_SOT_THT:TO-92_Inline | Q1 |
| 1 | 2k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R7 |
| 1 | 3.9k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R22 |
| 1 | 330 | Capacitor_THT:C_Disc_D5.1mm_W3.2mm_P5.00mm | C42 |
| 1 | 4.7u | Inductor_THT:L_Axial_L7.0mm_D3.3mm_P12.70mm_Horizontal_Fastron_MICC | L2 |
| 1 | 47k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | 4:20 | Transformer_THT:Transformer_Toroid_Horizontal_D12.5mm_Amidon-T44 | T1 |
| 1 | 5.6k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R21 |
| 1 | 50 | Capacitor_THT:CP_Radial_Tantal_D6.0mm_P5.00mm | C41 |
| 1 | 5:20 | Transformer_THT:Transformer_Toroid_Horizontal_D12.5mm_Amidon-T44 | T2 |
| 1 | 5k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R20 |
| 1 | Audio | Connector_JST:JST_XH_S2B-XH-A_1x02_P2.50mm_Horizontal | J3 |
| 1 | Freq_Counter | Connector_JST:JST_XH_S2B-XH-A_1x02_P2.50mm_Horizontal | J10 |
| 1 | IF_Out | Connector_JST:JST_XH_S2B-XH-A_1x02_P2.50mm_Horizontal | J14 |
| 1 | LM380N-8 | Package_DIP:DIP-8_W7.62mm_Socket | U3 |
| 1 | MC1350 | Package_DIP:DIP-8_W7.62mm_Socket | U6 |
| 1 | Outer_Ctrl | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J4 |
| 1 | PWR_12V | Connector_JST:JST_XH_S2B-XH-A_1x02_P2.50mm_Horizontal | J2 |
| 1 | PreMix_Out | Connector_JST:JST_XH_S2B-XH-A_1x02_P2.50mm_Horizontal | J9 |
| 1 | Premix_Filter | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J5 |
| 1 | RF_IN | Connector_JST:JST_XH_S2B-XH-A_1x02_P2.50mm_Horizontal | J1 |
| 1 | S9018 | Package_TO_SOT_THT:TO-92_Inline | Q2 |

rhit-gardneml/Macrophthalmus
"# Macrophthalmus" This is an ece capstone team at rose-hulman makeing a communication module for LEO communication

kysilv/z80-rp2350b-zx-compatible
Retrocomputer compatible with ZX Spectrum based on real Z80 + discrete RAM/ROM + rp2350b as ULA

Eugen98/RF-Oscillator
An educational project of a compact RF oscillator based on a single S9018 NPN transistor. The PCB was designed in KiCad 10 and is intended for 9 V power supply, a trimmer capacitor, and an external wire antenna.

josefadamcik/SofleKeyboard
A split keyboard based on Lily58, Crkbd and Helix keyboards

pierrechevalier83/ferris
A low profile split keyboard designed to satisfy one single use case elegantly

dekonnection/atreis
Based on Keebio's Iris keyboard design files, modified to achieve the same layout in a single-piece form-factor.


It measures 73.7 × 99.1 mm and has 2 copper layers, 1.6 mm thick.
114 parts, built around the LM380N-8, MC1350P and S9018. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Yurihou/BY1QH_K1_Remake repository on GitHub, at the commit this page was made from: the board is Hardwares/Elecraft_K1_Remake.kicad_pcb and its schematic Hardwares/Elecraft_K1_Remake.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Yurihou before reusing the design.