2 layers65 × 30 mm
Rgb to hdmi
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
33 parts1kGPL-3.0
2 layers66 × 48 mm
ATX PSU Adapter
Yanndroid/ATX-PSU-AdapterATX PSU Adapter for DIY projects
- Size
- 66 × 48 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 33
- Nets
- 11
- Pads
- 65
- Tracks, vias
- 63, 1
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 8 Sep 2023
- Updated
- 2 Apr 2024
Overview
ATX PSU Adapter is an open-source printed circuit board by Yanndroid, from the Yanndroid/ATX-PSU-Adapter repository on GitHub. It is a 2-layer board of 66 × 48 mm with 33 parts on 11 nets, routed with 63 tracks and 1 via.
Its parts include 27 connectors, 1 resistor and 1 IC. It belongs with the power and interfaces and adapters boards of this library.
README
README.mdATX PSU Adapter
This simple breakout board for a 24-pin ATX power supply provides 12V, 5V, 3.3V, and standby 5V. Additionally, it also has a small circuit to control the PSU.
Personally, I'm using this PCB to power my Raspberry Pi via the standby 5V line and can automatically turn the PSU on or off for other devices that also draw power from the PSU.
Parts
33| Qty | Value | Footprint | References |
|---|---|---|---|
| 15 | Conn_01x01 | Connector_Wire:SolderWire-0.75sqmm_1x01_D1.25mm_OD2.3mm | J4, J5, J6, J9, J10, J11, J14, J15, J16, J19, J20, J21, J24, J25, J26 |
| 5 | Conn_01x01 | Connector_Wire:SolderWire-1sqmm_1x01_D1.4mm_OD2.7mm | J7, J12, J17, J22, J27 |
| 5 | Conn_01x01 | Connector_Wire:SolderWire-0.5sqmm_1x01_D0.9mm_OD2.3mm | J3, J8, J13, J18, J23 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_2.5mm_Pad | H1, H2, H3, H4 |
| 1 | ATX-24 | Connector_Molex:Molex_Mini-Fit_Jr_5566-24A_2x12_P4.20mm_Vertical | J1 |
| 1 | Conn_02x03_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J2 |
| 1 | PC817 | Package_DIP:DIP-4_W7.62mm | U1 |
| 1 | R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
Similar boards
- 2 layers127 × 96 mm
Amiga gfxcard
mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog
33 parts1k - 2 layers92.7 × 58.4 mm
Hacky holidays
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
33 parts915 - 2 layers240 × 120 mm
Quiver PDB 01
Arrow-air/project-quiver
Project Quiver documentation, designs, and project artifacts.
33 parts617CERN-OHL-S-2.0 - 2 layers75 × 26 mm
DIY detector
ozel/DIY_particle_detector
A mobile low-cost spectrometer for measuring radioactivity and the energy of ionising radiation like alpha particles and electrons
33 parts558BSD-2-Clause - 2 layers100 × 50 mm
Pixelix
BlueAndi/Pixelix
Full RGB LED matrix, based on an ESP32 and WS2812B LEDs or emulated LEDs on TFT.
33 parts447MIT - 2 layers99.1 × 71.1 mm
CONTROLLER Standby Instrument
jrsteensen/OpenHornet
OpenHornet 1:1 F/A-18C Simulator Repository
33 parts431 - 2 layers65 × 30 mm
Questions
How big is the ATX PSU Adapter PCB?
It measures 66 × 48 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ATX PSU Adapter use?
33 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ATX PSU Adapter KiCad files?
From the Yanndroid/ATX-PSU-Adapter repository on GitHub, at the commit this page was made from: the board is ATX-PSU-Adapter.kicad_pcb and its schematic ATX-PSU-Adapter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ATX PSU Adapter design in my own project?
Its repository states no licence, so its author keeps all rights: ask Yanndroid before reusing the design.