Skip to the content
2 layers44 × 52 mmPi400-Pico Plate, the printed circuit board in 3D

This board connects a Pico to the GPIO header on a Pi 400, without any wires flapping in the breeze. See the schematic here (PDF).

Size
44 × 52 mm
Copper layers
2
Thickness
1.6 mm
Parts
14
Nets
66
Pads
150
Tracks, vias
97, 33
Pours
1
Routed
Yes
KiCad
KiCad 5 (file 20210228)
Created
6 Mar 2021
Updated
8 Mar 2021

Overview

Pi400-Pico Plate is an open-source printed circuit board by Wren6991, from the Wren6991/Pi400-Pico-Plate repository on GitHub, published under the CC0-1.0 licence. It is a 2-layer board of 44 × 52 mm with 14 parts on 66 nets, routed with 97 tracks and 33 vias.

Its parts include 4 connectors, 3 resistors, 3 diodes, 1 IC and 1 switch. It belongs with the RP2040 boards of this library.

README

Readme.md

Pi 400 Pico Plate

This board connects a Pico to the GPIO header on a Pi 400, without any wires flapping in the breeze. See the schematic here (PDF).

A pi 400 with this board plugged into its GPIO socket. A small, white, squarish board, with a pico soldered on top of it, sticking out of the pi 400. A green light is illuminated on both the pico and the pi 400.

I made this to use at work. Besides connecting power and debug, it clearly labels the Pico pinout when viewed from the top:

Besides the pinout labels, you can also see the labels on the three jumpers. One connects pi 5v to vbus, another connects Pi UART RX to Pico TX, and the third connects Pi TX to Pico RX

  • Pico VSYS is powered from Pi +5V rail
  • Pico SWD is connected to Pi GPIO 24/25
  • Pico RUN pin is connected to a push-button
  • (jumper) Pico UART on GPIO0/1 is connected to Pi GPIO14/15
  • (jumper) Pico VBUS is powered from +5V rail so Pico can function as USB host

That's it, that's the whole thing. This repository is CC0-licensed, with the exception of the 3d models in the 3d/ directory.

The board is designed with KiCad nightly; if you don't have KiCad nightly installed, you can find pregenerated gerbers of the rev A PCB in the gerb/ directory, which are suitable for manufacture by JLCPCB.

Parts

14
QtyValueFootprintReferences
32k2Resistor_SMD:R_0402_1005MetricR1, R2, R3
3LEDLED_SMD:LED_0805_2012MetricD1, D2, D3
22.54mm jumper cut-linkpi400-pico-plate:2.54mm- jumper-closedJ2, J4
12.54mm headerpi400-pico-plate:PinHeader_2x01_P2.54mm_VerticalJ3
12.54mm socket RAConnector_PinSocket_2.54mm:PinSocket_2x20_P2.54mm_HorizontalJ1
1PTS815pi400-pico-plate:SW_SPST_PTS815SW1
1Picopi400-pico-plate:PicoU1

The 12 most common of 14 parts.

Similar boards

  • 2 layers116.8 × 30 mmType d, the printed circuit board in 3D

    Type d

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    14 parts3kApache-2.0
  • 2 layers32 × 22 mmDiff driver, the printed circuit board in 3D

    Diff driver

    rene-dev/stmbl

    AC Servo Driver for STM32F4

    14 parts990GPL-3.0
  • 2 layers34 × 45 mm2032Charger, the printed circuit board in 3D

    2032Charger

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    14 parts915
  • 2 layers34 × 109.9 mmTdisplay s3, the printed circuit board in 3D

    Tdisplay s3

    landonr/homeThing

    Wifi Smart Home Remotes that run on ESPHome

    14 parts551GPL-3.0
  • 2 layers45.3 × 42.7 mmMainPcb, the printed circuit board in 3D

    MainPcb

    adamb314/ServoProject

    Getting the most out of your hobby servo

    14 parts545
  • 2 layers42.5 × 28.8 mmC5VRX JACK DIY, the printed circuit board in 3D

    C5VRX JACK DIY

    Twotoz/C5VRX

    Ultra-minimal, zero-CPU 5.8 GHz analog FPV video receiver using ESP32-C5 Wi-Fi 6 PHY MODEM_DIAG, BitScrambler WBFM demodulation & resistor DAC CVBS

    14 parts515GPL-3.0
  • 2 layers62 × 24 mmMai button, the printed circuit board in 3D

    Mai button

    whowechina/mai_pico

    Pico controller for Maimai

    14 parts475

Questions

How big is the Pi400-Pico Plate PCB?

It measures 44 × 52 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Pi400-Pico Plate use?

14 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Pi400-Pico Plate KiCad files?

From the Wren6991/Pi400-Pico-Plate repository on GitHub, at the commit this page was made from: the board is pi400-pico-plate.kicad_pcb and its schematic pi400-pico-plate.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Pi400-Pico Plate design in my own project?

Its repository publishes it under the CC0-1.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).