
Type f
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

Using the C4060 IC to time different LED blinks
C4060Demo is an open-source printed circuit board by Wjchou2, from the Wjchou2/C4060Demo repository on GitHub. It is a 2-layer board of 41.5 × 46.4 mm with 25 parts on 24 nets, routed with 126 tracks and 1 via.
Its parts include 11 resistors, 10 diodes, 2 capacitors, 1 IC and 1 connector.
Using the C4060 IC to time different LED blinks
The C4060Demo is a board that allows you to test the speeds that the C4060 IC generates, by using LED indicators. I made this project for Resolution Hardware Week 3, to practice reading datasheets and using ICs, and how to turn these into a real PCB board in KiCad. The power is supplied by an external battery that you can connect easily via the labled power pins on the left side of the board. To use, insert an LED into a 2 pin header on the right, each set of VCC and GND pins should have a longer and longer blink delay as you go down.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 300 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1, R3, R4, R5, R6, R7, R8, R9, R10, R11 |
| 10 | LED | LED_THT:LED_D5.0mm | D1, D2, D3, D4, D5, D6, D7, D8, D9, D10 |
| 1 | 0.1 | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C2 |
| 1 | 100kΩ | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R2 |
| 1 | 1µF | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C1 |
| 1 | 4060 | Package_DIP:DIP-16_W7.62mm | U1 |
| 1 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1 |

google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

davidphilipbarr/Sweep
Sweep - a small promicro based keyboard inspired by the Ferris.


hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

xyphro/UsbGpib
Versatile, cheap and portable USB to GPIB converter (USBTMC class based)


jes/scamp-cpu
A homebrew 16-bit CPU with a homebrew Unix-like-ish operating system.

It measures 41.5 × 46.4 mm and has 2 copper layers, 1.6 mm thick.
25 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Wjchou2/C4060Demo repository on GitHub, at the commit this page was made from: the board is kicad/Untitled.kicad_pcb and its schematic kicad/Untitled.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Wjchou2 before reusing the design.