Skip to the content
2 layers32 × 47 mmArduino Nano USB C, the printed circuit board in 3D

USB type C UART Breakout Board with THT Components using the CH340G

Size
32 × 47 mm
Copper layers
2
Thickness
1.6 mm
Parts
16
Nets
24
Pads
70
Tracks, vias
100, 3
Pours
1
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
26 May 2025
Updated
1 Oct 2025

Overview

Arduino Nano USB C is an open-source printed circuit board by Windcraftwerk, from the Windcraftwerk/CH340G-USB-C-UART-Module repository on GitHub. It is a 2-layer board of 32 × 47 mm with 16 parts on 24 nets, routed with 100 tracks and 3 vias.

It is built around the CH340G and MF-R050. Its parts include 5 resistors, 4 capacitors, 3 connectors, 1 IC and 1 diode. It belongs with the interfaces and adapters boards of this library.

Main components

2

README

README.md

CH340G-USB-C-UART-Module

USB type C UART Breakout Board with THT Components for easy home soldering using the CH340G in KiCad for practicing purposes.

Schematic Layout Top Layout Bottom 3D Top 3D Bottom

Parts

16
QtyValueFootprintReferences
2100nFCapacitor_THT:CP_Radial_D5.0mm_P2.50mmC2, C3
21kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR2, R3
222pFCapacitor_THT:CP_Radial_D5.0mm_P2.50mmC4, C5
25.1kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR4, R5
2Conn_01x05Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_VerticalJ2, J3
11N5822Zenerdiode_1N5822:DIOAD3070W130L950D530D1
14.7kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR1
1CH340GPackage_SO:SOIC-16_3.9x9.9mm_P1.27mmU1
1MF-R050Fuse-MF-R050:MFR050F1
1USB_C_Receptacle_USB2.0Connector_USB:USB_C_Receptacle_GCT_USB4085J1
1XT9S20ANA12MXT9S20ANA12M:XT9S20ANA12MY1

Similar boards

  • 2 layers85 × 155 mmEsp32-fan controller, the printed circuit board in 3D

    Esp32-fan controller

    merlindorin/esp32-fan-controller

    A small KiCad board to keep my home server cabinet cool. 4 PWM fans, 4 temperature probes, one ESP32.

    38 parts8MIT
  • 2 layers68.6 × 88.4 mmShield coil winder, the printed circuit board in 3D

    Shield coil winder

    jonathan-iap/CoilWinder

    A reprap coil winder machine based on arduino language

    34 parts4GPL-3.0
  • 2 layers72.1 × 41.8 mmPower injector rev c, the printed circuit board in 3D

    Power injector rev c

    grodansparadis/can4vscp-power-injector

    Power injector module for CAN4VSCP

    28 parts2
  • 2 layers100 × 100 mmTesseract, the printed circuit board in 3D

    Tesseract

    IoTCloudStudio/HW_Develop

    89 parts2
  • 2 layers120.4 × 100.1 mmDP1600i, the printed circuit board in 3D

    DP1600i

    Hocus-Pocus/Speeduino-DP1600i-

    126 parts1
  • 2 layers30 × 58.5 mmLoragate tht, the printed circuit board in 3D

    Loragate tht

    andrewgho/loragate

    ESP32 + LoRa radio powered reed switch door sensor

    10 parts
  • 2 layers100 × 100 mmFishy8, the printed circuit board in 3D

    Fishy8

    EmanuelKrabNL/Fishy8

    PCB with vintage camera looking footage. A microphone and a fisheye lens.

    15 partsMIT

Questions

How big is the Arduino Nano USB C PCB?

It measures 32 × 47 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Arduino Nano USB C use?

16 parts, built around the CH340G and MF-R050. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Arduino Nano USB C KiCad files?

From the Windcraftwerk/CH340G-USB-C-UART-Module repository on GitHub, at the commit this page was made from: the board is Arduino_Nano_USB_C.kicad_pcb and its schematic Arduino_Nano_USB_C.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Arduino Nano USB C design in my own project?

Its repository states no licence, so its author keeps all rights: ask Windcraftwerk before reusing the design.