

Comma pedal
- Size
- 40 × 50 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 41
- Nets
- 79
- Pads
- 204
- Tracks, vias
- 387, 13
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 27 Jun 2026
- Updated
- 27 Jun 2026
Overview
Comma pedal is an open-source printed circuit board by Wim426F, from the Wim426F/Pedal-interceptor-hardware repository on GitHub. It is a 2-layer board of 40 × 50 mm with 41 parts on 79 nets, routed with 387 tracks and 13 vias.
It is built around the STM32F205RET6, TJA1042TK/3/1 and MCP6002T-I/SN(MS), with the TPS73433DDCR, ABM8AIG-16.000MHZ-82Z-T and RJ45 among its other parts. Its parts include 17 resistors, 14 capacitors, 4 ICs, 4 connectors and 1 diode. It belongs with the audio and music boards and the STM32 boards of this library.
Main components
6STM32F205RET6
LQFP-64(10x10)-40℃~+85℃ 1.8V~3.6V 120MHz 12bit 12bit 132KB 32 Bit 51 512KB ARM Cortex-M3 Built-in FLASH LQFP-64(10x10) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)TJA1042TK/3/1
HVSON-8-EP(3x3)Low-power mode、Immunity optimization、Under-voltage lockout (UVLO)、Error detection and recovery HVSON-8-EP(3x3) Ethernet Transceivers ROHSNXP SemiconductorsEthernet TransceiversMCP6002T-I/SN(MS)
SOP-8-2.75V~-1.35V、1.35V~2.75V -55℃~+125℃ 1.2V/us 1.5MHz 1pA 2 2.1V~5.5V 2pA 500uV 50uA 650nV/℃ 95dB Built-in compensation、Zero drift / auto-zero Rail-to-Rail Input, Rail-to-Rail Output SOP-8 Operational Amplifier ROHSMSKSEMIOperational AmplifierTPS73433DDCR
SOT-23-5-40℃~+125℃@(Tj) 1 219mV@(250mA) 250mA 28uVrms 3.3V 6.5V 60dB@(1kHz) 65uA Fixed Over Current Protection、Enable、Thermal Shutdown Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsABM8AIG-16.000MHZ-82Z-T
SMD3225-4P-40℃~+125℃ 16MHz 70Ω 8pF ±20ppm ±50ppm SMD3225-4P Crystals ROHSAbraconCrystalsRJ45
TH-12PTH-12P SMT ROHSJLCPCB AssemblyUncategorised
Parts
41| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 100nF | Capacitor_SMD:C_0603_1608Metric | C1, C3, C6, C7, C8, C9, C12, C14 |
| 8 | 10kΩ | Resistor_SMD:R_0603_1608Metric | R1, R6, R13, R14, R15, R16, R17, R18 |
| 4 | 1kΩ | Resistor_SMD:R_0603_1608Metric | R9, R10, R11, R12 |
| 3 | 2.2uF | Capacitor_SMD:C_0603_1608Metric | C10, C11, C13 |
| 2 | 12pF | Capacitor_SMD:C_0603_1608Metric | C4, C5 |
| 2 | 22R | Resistor_SMD:R_0603_1608Metric | R7, R8 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric | R3, R4 |
| 1 | 220R | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | 4.7uF | Capacitor_SMD:C_0603_1608Metric | C2 |
| 1 | ABM8AIG-16.000MHZ-82Z-T | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | LED_GREEN | LED_SMD:LED_0805_2012Metric | D1 |
| 1 | MCP6002T-I/SN | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | Pedal in | Connector_Wire:SolderWire-1sqmm_1x06_P5.4mm_D1.4mm_OD2.7mm | J4 |
| 1 | Pedal out | Connector_Wire:SolderWire-1sqmm_1x06_P5.4mm_D1.4mm_OD2.7mm | J5 |
| 1 | RJ45 | Connector_RJ:RJ45_Ninigi_GE | J1 |
| 1 | STM32F205RET6 | Package_QFP:LQFP-64_10x10mm_P0.5mm | U1 |
| 1 | TJA1042TK-3 | Package_SON:HVSON-8-1EP_3x3mm_P0.65mm_EP1.6x2.4mm | U3 |
| 1 | TPS73433DDCR | Package_TO_SOT_SMD:SOT-23-5 | U4 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_HCTL_HC-TYPE-C-16P-01A | J2 |
Similar boards
- 4 layers82.5 × 78 mm

- 4 layers60 × 107 mm

Clock sync 16
AllenNeuralDynamics/harp.device.white-rabbit
0361: A 16-output Harp clock synchronizer
172 parts1 - 2 layers85 × 60 mm

- 2 layers30 × 43 mm

Hayashi light control
Ledger-Donjon/hayashi-light-remote
USB remote control dongle for Hayashi LA-150CE halogen lamp
34 parts2 - 2 layers60.5 × 95 mm

Phylax Version 3
ta007403/PHYLAX
PHYLAX (Greek φύλαξ, "guardian") is an open-source, Bitcoin-only hardware wallet built around a simple idea: no black-box chips, no wireless radios, no telemetry, and firmware you can read and verify yourself.
65 parts - 16 layers50 × 26.7 mm

- 2 layers65 × 65 mm

- 2 layers50 × 26.7 mm

Questions
How big is the Comma pedal PCB?
It measures 40 × 50 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Comma pedal use?
41 parts, built around the STM32F205RET6, TJA1042TK/3/1, MCP6002T-I/SN(MS) and TPS73433DDCR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Comma pedal KiCad files?
From the Wim426F/Pedal-interceptor-hardware repository on GitHub, at the commit this page was made from: the board is comma_pedal.kicad_pcb and its schematic comma_pedal.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Comma pedal design in my own project?
Its repository states no licence, so its author keeps all rights: ask Wim426F before reusing the design.