
Openridingcontroller rev2
Squalius-cephalus/OpenRidingController
D.I.Y horse riding controller for the PC.

A portfolio of assorted university, work, and personal projects.
Light Sensor is an open-source printed circuit board by WhyIsThisMyUsername, from the WhyIsThisMyUsername/general_portfolio repository on GitHub. It is a 4-layer board of 40 × 15 mm with 11 parts on 8 nets, routed with 66 tracks and 3 vias.
It is built around the MCP6272-E/SN and TCRT5000. Its parts include 3 capacitors, 2 resistors, 2 ICs and 1 connector. It belongs with the sensors and measurement boards of this library.
The Line Following Robot project at the University of Canterbury required students to design the PCBs, chassis, and code for a robot.
The included video demonstrates our group's robot successfully following a line. Some PCB schematics have been included as part of my contribution to the design of the robot line sensors.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | C | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C2 |
| 2 | N6L50T0C-103-3030 | Footprint Library:N6L50T0C1033030 | VR1, VR2 |
| 2 | R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R3 |
| 1 | C_Polarized | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C3 |
| 1 | Conn_01x07_Pin | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J1 |
| 1 | MCP6272-E/SN | Footprint Library:SOIC8-N_MC_MCH | U2 |
| 1 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_Pad_TopBottom | H1 |
| 1 | TCRT5000 | Footprint Library:TCRT5000_VIS | U1 |

Squalius-cephalus/OpenRidingController
D.I.Y horse riding controller for the PC.


xtarke/automated_buggy
This shield connects microcontroller (MSP-EXP430FR2355) pins to the car's power board. Go to Power Board for more hardware information.

Amrlxyz/esp-lfr-buggy
2nd Year Embedded Systems Project (ESP) - Line Following Robot Buggy


ciiiutnfrc/eduromaa
Versión educativa del robot móvil RoMAA (EduRoMAA)

billtsol/Maze
This project demonstrates how to use an Arduino board, IR sensors, and a motor driver shield to create a maze-solving robot.

Potato-eater/Legacy2026
github repo for Robocup Junior Australia lightweight soccer team
It measures 40 × 15 mm and has 4 copper layers, 1.6 mm thick.
11 parts, built around the MCP6272-E/SN and TCRT5000. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the WhyIsThisMyUsername/general_portfolio repository on GitHub, at the commit this page was made from: the board is university_projects/line_following_robot/Light Sensor.kicad_pcb and its schematic university_projects/line_following_robot/Light Sensor.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask WhyIsThisMyUsername before reusing the design.