
Battery powered
homelith/pico-disp-ident
Custom firmware to make some RP2040 board working as DVI display tester & identifier

This repository contains the experimental code for the ZOROZORO project, which controls 256 toio cubes simultaneously.
Zrzr is an open-source printed circuit board by Whatever-Co, from the Whatever-Co/zorozoro-experiments repository on GitHub, published under the MIT licence. It is a 2-layer board of 256 × 74 mm with 30 parts on 226 nets, routed with 38 tracks and 0 vias.
It is built around the SS12D01G4ENS. Its parts include 16 capacitors, 8 switches and 1 connector.
This repository contains the experimental code for the ZOROZORO project, which controls 256 toio cubes simultaneously.

https://twitter.com/Saqoosha/status/1333233470143774720

| Module | Role | Source code |
|---|---|---|
| Cube Controller | Collects information from the Scanner and Bridge and sends out appropriate commands to each cube. | 14-cubecontroller |
| Bridge | Make a BLE connection with toio cubes and relay with Controller through TCP socket. | 13-unitycontroller2/PlatformIO/bridge/ |
| Scanner | Detects a cube emitting an advertising signal and tells the contoller. | 13-unitycontroller2/PlatformIO/scanner/ |

| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | Conn_01x12_Female | Connector_PinSocket_2.54mm:PinSocket_1x12_P2.54mm_Vertical | C2, C4, C6, C8, C10, C12, C14, C16 |
| 8 | Conn_01x16_Female | Connector_PinSocket_2.54mm:PinSocket_1x16_P2.54mm_Vertical | C1, C3, C5, C7, C9, C11, C13, C15 |
| 8 | SS12D01G4 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 |
| 1 | Barrel_Jack | Connector_BarrelJack:BarrelJack_Horizontal | J1 |
| 1 | LOGO | whatever:whatever_20mm | G*** |
The 26 most common of 30 parts.

homelith/pico-disp-ident
Custom firmware to make some RP2040 board working as DVI display tester & identifier



google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards


VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

tenderlove/initial-v
It's a BMW shifter converted to a Bluetooth Keyboard that you use with Vim
It measures 256 × 74 mm and has 2 copper layers, 1.6 mm thick.
30 parts, built around the SS12D01G4ENS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Whatever-Co/zorozoro-experiments repository on GitHub, at the commit this page was made from: the board is 10-powerpcb/zrzr.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).