
ESP32 Transmitter and Receiver
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

PcbAndMaterials is an open-source printed circuit board by WasabiMushyPeas, from the WasabiMushyPeas/HotKeyboard repository on GitHub. It is a 2-layer board of 80 × 100 mm with 48 parts on 41 nets, routed with 243 tracks and 22 vias.
Its parts include 25 resistors, 10 switches, 9 capacitors and 3 diodes. It belongs with the keyboards and input boards and the AVR (ATmega, ATtiny) boards of this library.
if you would like to use my PCB design you need:
| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R4, R5, R13, R14, R15, R19, R20, R21, R26, R29, R31 |
| 9 | 1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C3, C4, C7, C8, C9, C10, C11, C12 |
| 8 | 500ohm | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6, R7, R8, R16, R17, R18, R22, R23 |
| 4 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R25, R27, R28, R30 |
| 1 | 4 pos mode sel | Package_DIP:DIP-8_W7.62mm | SW21 |
| 1 | 500 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R24 |
| 1 | Arduino_Nano_v3.x | Module:Arduino_Nano | A1 |
| 1 | D10 | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW6 |
| 1 | D2 | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW20 |
| 1 | D3 | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW18 |
| 1 | D4 | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW19 |
| 1 | D5 | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW12 |
| 1 | D6 | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW13 |
| 1 | D7 | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW14 |
| 1 | D8 | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW4 |
| 1 | D9 | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW5 |
| 1 | MODE 1 | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D2 |
| 1 | MODE 2 | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D3 |
| 1 | PWR | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

adamws/kicad-kbplacer
KiCad plugin for automatic keyboard's key placement and routing



softerhardware/Hermes-Lite2
A second generation low-cost amateur HF software defined radio transceiver.

CRImier/MyKiCad
My KiCad boards. Can't be bothered uploading individually anymore, so here you go.

loxodes/vna
Under development open hardware microwave vector network analyzer

fellesverkstedet/fabricatable-machines
Motion systems for flexible digital fabrication and research. Easy to fabricate and customize. Documentation: https://github.com/fellesverkstedet/fabricatable-machines/wiki
It measures 80 × 100 mm and has 2 copper layers, 1.6 mm thick.
48 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the WasabiMushyPeas/HotKeyboard repository on GitHub, at the commit this page was made from: the board is pcbAndMaterials/S.kicad_pcb and its schematic pcbAndMaterials/S.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask WasabiMushyPeas before reusing the design.