
Sanfrancisco barometer rev C
grodansparadis/can4vscp-sanfrancisco-barometer
CAN4VSCP barometer module

An aprs based weather station
Weather station is an open-source printed circuit board by W-M-D, from the W-M-D/weather_station repository on GitHub. It is a 2-layer board of 100 × 140 mm with 117 parts on 109 nets, routed with 934 tracks and 90 vias.
It is built around the MPL115A1T1, LT1129CS8-3.3#PBF and MPU-9250, with the FL3200037 and MBRD10100CT among its other parts. Its parts include 43 capacitors, 32 resistors, 6 ICs, 5 diodes and 5 transistors. It belongs with the home automation and IoT boards and the nRF52 and nRF5x boards of this library.
The ultimate in nrf52832 based APRS weather stations!
Just a quick update after finding that you can buy a weather station replacement kit for ~$70 that has a few radios that is already supported by rtl_433 i sat down and did some thinking. What could i do that would be more universal. Like the ultimate Ham hacking kit. After much debate with myself. I have decided to make something much more generic. But i also wanted to create something that was much more than a simple dev board. I'm keeping the universality down to one radio besides the Bluetooth one. But i am going to add a raspberry pi header for reasons. My goal is to make a device that, with your ham radio, you can create anything you desire within the limits of the community and APRS.
Another update i'm still going to make a version of the board with out the raspberry pi HAT. I'm going to elimiate most of the hardware since i'm planning on reading from external sensors. I'm planning on breaking out the nrf52832 to pin headers to connect the hardware. This will still run off 4 18650s and will still have the solar MPPT circuit.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 1.0uF | Capacitors_SMD:C_0805 | C27, C28, C32, C34, C37, C39 |
| 5 | 0.1uF | Capacitors_SMD:C_0805 | C31, C33, C38, C41, C42 |
| 5 | 100kΩ | Resistors_SMD:R_0603 | R16, R21, R30, R31, R32 |
| 5 | 100nF | Capacitors_SMD:C_0402 | C4, C10, C11, C21, C25 |
| 4 | 10MΩ | Resistors_SMD:R_0603 | R1, R6, R10, R13 |
| 4 | 18650Cell | Battery_Holders:Keystone_1042_1x18650 | BT1, BT2, BT3, BT4 |
| 4 | 510Ω | Resistors_SMD:R_0603 | R4, R5, R11, R12 |
| 4 | FDMS8050 | TO_SOT_Packages_SMD:TDSON-8-1 | Q2, Q3, Q4, Q5 |
| 4 | F_cap | Capacitors_SMD:C_0402 | C5, C7, C16, C18 |
| 4 | Mounting_Hole | Mounting_Holes:MountingHole_3.5mm_Pad | MK1, MK2, MK3, MK4 |
| 4 | Mounting_Hole_PAD | Measurement_Points:Measurement_Point_Square-SMD-Pad_Big | MK5, MK6, MK7, MK8 |
| 3 | 10uF | Capacitors_SMD:C_1206 | C1, C2, C20 |
| 3 | 255Ω | Resistors_SMD:R_0603 | R7, R8, R9 |
| 3 | 5.23kΩ | Resistors_SMD:R_0603 | R15, R25, R26 |
| 3 | C_Small | Capacitors_SMD:C_0402 | C26, C29, C30 |
| 2 | 0.010Ω | Resistors_SMD:R_2512 | R27, R28 |
| 2 | 1.8kΩ | Resistors_SMD:R_0603 | R2, R3 |
| 2 | 100uF | Capacitors_SMD:CP_Elec_6.3x7.7 | C35, C43 |
| 2 | 12pF | Capacitors_SMD:C_0402 | C14, C15 |
| 2 | 1uF | Capacitors_SMD:C_0402 | C8, C23 |
| 2 | 47uF | Capacitors_SMD:CP_Elec_6.3x7.7 | C36, C40 |
| 2 | 499kΩ | Resistors_SMD:R_0603 | R20, R29 |
| 2 | Conn_Coaxial | Connectors:SMA_SMD_Jack_Straight | J3, J4 |
| 2 | Diff_Cap | Capacitors_SMD:C_0402 | C6, C17 |
| 2 | LED | LEDs:LED_0805 | D5, D6 |
| 2 | tuning_cap | Capacitors_SMD:C_0603 | C12, C13 |
| 1 | - | Resistors_SMD:R_0603 | R23 |
| 1 | - | Capacitors_SMD:C_0805 | C19 |
| 1 | 1.8KΩ | Resistors_SMD:R_0603 | R18 |
| 1 | 100pF | Capacitors_SMD:C_0402 | C9 |
| 1 | 10kΩ | Resistors_SMD:R_0603 | R14 |
| 1 | 10nF | Capacitors_SMD:C_0402 | C24 |
| 1 | 10Ω | Resistors_SMD:R_0603 | R24 |
| 1 | 3.3kΩ | Resistors_SMD:R_0603 | R17 |
| 1 | 3.3nH | Capacitors_SMD:C_0402 | L3 |
| 1 | 3.3uH | Inductors:Inductor_Wurth_HCI-1890 | L5 |
| 1 | 30.1kΩ | Resistors_SMD:R_0603 | R19 |
| 1 | 32.786khz | Crystals:Crystal_SMD_EuroQuartz_EQ161-2pin_3.2x1.5mm | Y2 |
| 1 | 36kΩ | Resistors_SMD:R_0603 | R22 |
| 1 | 4.7uF | Capacitors_SMD:C_0402 | C3 |
| 1 | ADS1120-PW | Housings_SSOP:TSSOP-16_4.4x5mm_Pitch0.65mm | U2 |
| 1 | ANEOMETER | Wire_Connections_Bridges:WireConnection_2.00mmDrill | M1 |
| 1 | BQ24650 | Housings_DFN_QFN:QFN-16-1EP_3x3mm_Pitch0.5mm | U4 |
| 1 | Conn_02x10_Odd_Even | Pin_Headers:Pin_Header_Straight_2x10_Pitch2.54mm | J2 |
| 1 | DRA818U | DRA818UV:DRA818U | DRA1 |
| 1 | D_Schottky | Diodes_SMD:D_SOD-523 | D4 |
| 1 | EMI_Filter_C | MiniCircuits:FV1206-1 | C22 |
| 1 | FL3200037 | Crystals:Crystal_SMD_3225-4pin_3.2x2.5mm | Y1 |
| 1 | Jumper | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | JP1 |
| 1 | LT1129CS8-3.3 | Power_Integrations:SO-8C | U1 |
| 1 | LTRB GFSF | LEDs:LED_RGB_PLCC-6 | D2 |
| 1 | MBRD10100CT | TO_SOT_Packages_SMD:TO-252-2_Rectifier | D3 |
| 1 | MPL115A1 | Housings_LGA:LGA-8_3x5mm_Pitch1.25mm | U5 |
| 1 | MPU-9250 | Housings_DFN_QFN:QFN-24-1EP_3x3mm_Pitch0.4mm | U6 |
| 1 | Q_NMOS_DGS | TO_SOT_Packages_SMD:SOT-23 | Q1 |
| 1 | SOLAR | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | J6 |
| 1 | Thermistor_NTC | Resistors_SMD:R_0805 | TH1 |
| 1 | ant | Microwave:SMA | AE1 |
| 1 | nRF52832 | Housings_DFN_QFN:UQFN-48-1EP_6x6mm_Pitch0.4mm | U3 |
| 1 | tuning_inductor | Capacitors_SMD:C_0402_NoSilk | L4 |

grodansparadis/can4vscp-sanfrancisco-barometer
CAN4VSCP barometer module


Jeija/esp8266-smartwatch
ESP8266 DIY WiFi Smartwatch with MPU-9250, RTC, OLED, FT232, ...



crnicholson/StratoSoar-MK2
StratoSoar is an engineering project that aims to be able to fly a glider (dropped from a high-altitude balloon), down to any selected coordinates.

squarewavedot/ledcubeelectronics
LEDCube battery and masterboard electronics
Kamilake/FineMotion-Tracker
ESP8266 Motion Capture Full-Body Tracker for SlimeVR
It measures 100 × 140 mm and has 2 copper layers, 1.6 mm thick.
117 parts, built around the MPL115A1T1, LT1129CS8-3.3#PBF, MPU-9250 and FL3200037. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the W-M-D/weather_station repository on GitHub, at the commit this page was made from: the board is weather_station.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask W-M-D before reusing the design.