

Channel of instrumentation
Low power channel of instrumentation
- Size
- 58.7 × 77.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 44
- Nets
- 34
- Pads
- 117
- Tracks, vias
- 227, 16
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 26 Mar 2018
- Updated
- 14 May 2018
Overview
Channel of instrumentation is an open-source printed circuit board by Vincent-Stragier, from the Vincent-Stragier/LOW_POWER_ECG-PCB repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 58.7 × 77.7 mm with 44 parts on 34 nets, routed with 227 tracks and 16 vias.
It is built around the OPA4336PA. Its parts include 16 resistors, 9 connectors, 4 capacitors and 2 ICs.
Main components
1README
README.mdVersion française ci-dessous
PCB-ECG-Basse-consommation
Chaîne d'instrumentation basse consomation destinée à une application de capture ECG. En plus du projet KiCad, vous trouverez les codes utilisées pour échantillonner, afficher et enregistrer les données, à l'aide d'un carte Arduino Uno.
À propos du projet
Ce projet utilise la récolte d'énergie pour réaliser un électrocardiographe (ECG). Donc, la chaîne d'instrumentation a besoin d'être basse consommation. Le schéma du circuit est inspiré de la datasheet de l'"INA321". Il s'agit d'un composant de Texas Instruments.
À propos de nous
Nous sommes trois étudiants de la Faculté Polytechnique de Mons (Université de Mons, UMons). Antoine DUFRANE, Charlotte LUYPAERT et Vincent STRAGIER (moi-même) avons travaillé sur ce projet. C'est un projet que nous faisons dans le cadre de notre troisième année dans la Faculté Polytechnique, option electricité.
English version below
LOW_POWER_ECG-PCB
Low power channel of instrumentation for an ECG application. In complement of the KiCad project you will find codes used to sample, show and to record data with the help of an Arduino Uno card.
About it
This project is using powerharvesting to make an electrocardiograph (ECG). So the channel of instrumentation needs to be low power. The circuit schematic is inspired from the "INA321" datasheet. It's a Texas Instruments component.
About us
We are 3 students of the Polytechnic Faculty of Mons (University of Mons in Belgium, UMons). Antoine DUFRANE, Charlotte LUYPAERT and Vincent STRAGIER (myself) have been working on this project. It's a project for our third year in the Electrical Engineering Faculty
Parts
44| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 100K | Resistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R3, R4, R7 |
| 4 | M4 | Mounting_Holes:MountingHole_4.3mm_M4_ISO14580 | H1, H2, H3, H4 |
| 3 | 10K | Resistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R9, R11, R16 |
| 3 | 1M | Resistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R8, R13, R14 |
| 2 | 2M | Resistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R5, R6 |
| 2 | Filtre | Pin_Headers:Pin_Header_Straight_1x06_Pitch2.54mm | J5, J8 |
| 2 | Gain | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm | J6, J7 |
| 2 | X | Resistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R12, R15 |
| 1 | KiCad_empreintes:Blason_FPMs_4,8X5,2 | ||
| 1 | 0.1µ | Capacitors_THT:C_Disc_D7.5mm_W4.4mm_P5.00mm | C2 |
| 1 | 1.6n | Capacitors_THT:C_Disc_D7.5mm_W4.4mm_P5.00mm | C3 |
| 1 | 1µF | Capacitors_THT:CP_Radial_D6.3mm_P2.50mm | C1 |
| 1 | 390K | Resistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R10 |
| 1 | GNDA Shutdown V+ Vout | Pin_Headers:Pin_Header_Straight_1x06_Pitch2.54mm | J1 |
| 1 | INA321 | Housings_SSOP:MSOP-8_3x3mm_Pitch0.65mm | U1 |
| 1 | Left Arm | KiCad_empreintes:JEITA_RC-5231 | J2 |
| 1 | OPA4336 | KiCad_empreintes:DBQ0016A | U2 |
| 1 | Offset | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm | J9 |
| 1 | Right Arm | KiCad_empreintes:JEITA_RC-5231 | J3 |
| 1 | Right Leg | KiCad_empreintes:JEITA_RC-5231 | J4 |
| 1 | X | Capacitors_THT:C_Disc_D7.5mm_W4.4mm_P5.00mm | C4 |
The 36 most common of 44 parts.
Similar boards
- 2 layers78 × 60 mm

- 2 layers115 × 14.5 mm

- 2 layers37.7 × 20 mm

- 2 layers88.9 × 88.4 mm

- 2 layers125 × 98 mm

3-in-1
mudmin/AnotherMaker
This is where I will store code snippets for AnotherMaker Videos
44 parts258 - 2 layers65 × 56.5 mm

RPiG3iMac
qbancoffee/imac_g3_ivad_board_init
iMac G3 IVAD board initialization with an arduino
44 parts240LGPL-3.0 - 2 layers54.4 × 49.3 mm

Fx3 tn20k adapter
Stefan-Olt/MISRC
MISRC Is a multi channel RF capture device for FM RF, S-Video, CVBS RAW capture and anything else, but intended and supported for the decode family of projects vhs-decode, ld-decode, hifi-decode.
44 parts236CC-BY-4.0 - 2 layers250 × 32 mm

Questions
How big is the Channel of instrumentation PCB?
It measures 58.7 × 77.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Channel of instrumentation use?
44 parts, built around the OPA4336PA. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Channel of instrumentation KiCad files?
From the Vincent-Stragier/LOW_POWER_ECG-PCB repository on GitHub, at the commit this page was made from: the board is Projet_KiCad/Channel_of_instrumentation.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Channel of instrumentation design in my own project?
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).