Skip to the content
2 layers61.5 × 90.5 mmTransmitter, the printed circuit board in 3D

Custom quadcopter project — PCB design, radio control, receiver, and flight controller development.

Size
61.5 × 90.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
6
Nets
33
Pads
52
Tracks, vias
74, 0
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
25 Sep 2026
Updated
25 Sep 2026

Overview

Transmitter is an open-source printed circuit board by VedantDhage, from the VedantDhage/custom-quadcopter repository on GitHub. It is a 2-layer board of 61.5 × 90.5 mm with 6 parts on 33 nets, routed with 74 tracks and 0 vias.

Its parts include 3 connectors and 1 capacitor. It belongs with the robots and motor control and radio and wireless boards and the AVR (ATmega, ATtiny) boards of this library.

README

README.md

Custom Quadcopter

A custom-built quadcopter project developed to understand and implement the complete drone system, from radio control and PCB design to the flight controller and motor control.

Project Status

Transmitter

  • KiCad schematic completed
  • KiCad PCB completed
  • Hardware assembly completed

Receiver

  • Arduino Nano + nRF24L01 based receiver
  • PCB assembly in progress
  • 4-channel receiver interface planned

Flight Controller

  • STM32F103C8T6 based flight controller
  • Development in progress
  • MPU6050-based attitude sensing planned
  • ESC motor outputs planned

System Architecture

text
Transmitter
    ↓
nRF24L01 Wireless Link
    ↓
Receiver
    ↓
Flight Controller
    ↓
ESCs
    ↓
Brushless Motors

Hardware
Arduino Nano
nRF24L01
STM32F103C8T6
MPU6050
A2212 brushless motors
30A ESCs

Development Status
This project is under active development. Hardware, firmware, schematics, and documentation will be added as each subsystem is completed.

Parts

6
QtyValueFootprintReferences
2Conn_01x05Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_VerticalJ2, J3
1100uFCapacitor_THT:CP_Radial_D5.0mm_P2.00mmC1
1Arduino_Nano_v3.xModule:Arduino_NanoA1
1BatteryConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_HorizontalJ1
1Conn_01x08Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_VerticalNRF24

Similar boards

  • 2 layers18.5 × 11.1 mmSwitch, the printed circuit board in 3D

    Switch

    byrantech/laptop

    anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

    6 parts4.3kMIT
  • 2 layers14.6 × 33 mmBrain board SD Card 1, the printed circuit board in 3D

    Brain board SD Card 1

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    6 parts1.2k
  • 2 layers9 × 9 mmDpoint, the printed circuit board in 3D

    Dpoint

    Jcparkyn/dpoint

    Open-source digital stylus using camera tracking and inertial measurements

    6 parts1.1kMIT
  • 2 layers51.5 × 16.6 mmMicroswitchXY Endstop, the printed circuit board in 3D

    MicroswitchXY Endstop

    VoronDesign/Voron-Hardware

    Cool Hardware designed by the Voron Design group

    6 parts1.1kGPL-3.0
  • 2 layers21.9 × 76.7 mmAmiga External, the printed circuit board in 3D

    Amiga External

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    6 parts1kGPL-3.0
  • 2 layers88.9 × 50.8 mmBusinesscard, the printed circuit board in 3D

    Businesscard

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    6 parts915
  • 2 layers20.3 × 15.2 mmL0 RGB led, the printed circuit board in 3D

    L0 RGB led

    Luos-io/luos_engine

    Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

    6 parts546MIT
  • 2 layers9 × 3.6 mmOpticalEncoder, the printed circuit board in 3D

    OpticalEncoder

    adamb314/ServoProject

    Getting the most out of your hobby servo

    6 parts545

Questions

How big is the Transmitter PCB?

It measures 61.5 × 90.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Transmitter use?

6 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Transmitter KiCad files?

From the VedantDhage/custom-quadcopter repository on GitHub, at the commit this page was made from: the board is transmitter/kicad/Transmitter.kicad_pcb and its schematic transmitter/kicad/Transmitter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Transmitter design in my own project?

Its repository states no licence, so its author keeps all rights: ask VedantDhage before reusing the design.