

PCB PT100 SM50
Tarjeta de acondicionamiento de senales PT100 y SM-50
- Size
- 80 × 65 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 67
- Nets
- 50
- Pads
- 190
- Tracks, vias
- 299, 4
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 26 Jun 2026
- Updated
- 11 Jul 2026
Overview
PCB PT100 SM50 is an open-source printed circuit board by VIXCA22, from the VIXCA22/Proyecto_PCB_PT100_SM50 repository on GitHub. It is a 2-layer board of 80 × 65 mm with 67 parts on 50 nets, routed with 299 tracks and 4 vias.
It is built around the OPA2188AIDR-MS, INA826AIDRGR and REF3012AIDBZR, with the TPD4E1U06DBVR, TPS7A4901DGNT and 1812L050/30PR among its other parts. Its parts include 28 capacitors, 14 resistors, 8 ICs, 4 fuses and 1 diode.
Main components
9OPA2188AIDR-MS
SOP-8-40℃~+105℃ 1.5V/us 100pA 120dB 2 304uA 50nV/℃ 50pA 7.5uV Rail-to-rail output Zero drift / auto-zero、EMI filtering/RF suppression SOP-8 Operational Amplifier ROHSMSKSEMIOperational AmplifierINA826AIDRGR
WSON-8-EP(3x3)-18V~-1.5V、1.5V~18V -40℃~+125℃ 0.003% 115dB 124dB 12us 16mA 18nV/√Hz@1kHz 1V/V~1000V/V 1V/us 200uA 35nA 3V~36V 400nV/℃ 40uV 700pA External resistor gain、Overvoltage protection Rail-to-rail output WSON-8-EP(3x3) Instrumentation Amplifiers ROHSTexas InstrumentsInstrumentation AmplifiersREF3012AIDBZR
SOT-23-40℃~+125℃@(Ta) 1.25V 1.8V~5.5V 14uVp-p 25mA 42uVrms 50uA 75ppm/℃ Fixed Series ±0.2% SOT-23 Voltage Reference ROHSTexas InstrumentsVoltage ReferenceTPD4E1U06DBVR
SOT-23-6-55℃~+125℃ 0.55pF 10nA 14V 5.5V 50W@8/20us 8.5V IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 TVS Unidirectional SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSTECH PUBLICESD And Surge Protection (TVS/ESD)TPS7A4901DGNT
MSOP-8-EP-40℃~+125℃ 1 1.194V~33V 15.4uVrms 150mA 35V 450mV@(1A) 49uA 72dB@(120Hz) Adjustable Over Current Protection、Thermal Shutdown、Enable control、Input undervoltage protection Positive MSOP-8-EP Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators1812L050/30PR
1812-40℃~+85℃ 1.25mm 100A 150ms 150mΩ 1A 1Ω 3.41mm 30V 4.73mm 500mA 800mW 1812 Resettable Fuses ROHSLittelfuseResettable FusesAST0250304
插件,P=5mm1 13A 3 300V 3P 5mm Gray Through Hole 插件,P=5mm Spring Clamp System Terminal Block ROHSMETZ CONNECT GmbHSpring Clamp System Terminal BlockAST0250404
插件,P=5mmSpring Clamp System Terminal BlockMETZ CONNECT GmbHSMF12CT1G
SOT-363100nA 12V 13.5V 150W@8/20us 20pF 28V 5 5A@8/20us IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 SOT-363 ESD and Surge Protection (TVS/ESD) ROHSTECH PUBLICESD And Surge Protection (TVS/ESD)
README
PCB_PT100_SM50/README.mdProyecto KiCad - PCB PT100 y SM-50
Esta carpeta contiene el diseno KiCad principal de la tarjeta de acondicionamiento de senales para sensores PT100 y SM-50.
Archivos principales
| Archivo o carpeta | Uso |
|---|---|
PCB_PT100_SM50.kicad_pro | Proyecto KiCad principal. |
PCB_PT100_SM50.kicad_sch | Esquematico del circuito de acondicionamiento. |
PCB_PT100_SM50.kicad_pcb | Layout de la PCB. |
symbols/ | Librerias de simbolos locales. |
footprints/ | Huellas locales usadas por la PCB. |
3d/ | Modelos 3D vinculados a las huellas. |
bom/ | Lista de materiales y referencia de compra. |
docs/ | Imagenes y soporte visual del diseno. |
outputs/ | Reportes de validacion generados por KiCad. |
Estado de validacion
El cierre de validacion documentado fue generado con KiCad 9 y no reporta violaciones:
../docs/validacion/erc_final_20260626.rpt
../docs/validacion/drc_final_20260626.rptLa carpeta outputs/ conserva reportes locales intermedios del PCB. Los reportes anteriores con warnings eran de sincronizacion de librerias, no de conexion electrica. Se registro la libreria faltante ProyectoPCB y se dejo la regla lib_symbol_mismatch en ignore porque varios simbolos fueron ajustados localmente para el esquematico.
Uso rapido
- Abrir
PCB_PT100_SM50.kicad_proen KiCad 9. - Revisar el esquematico y correr ERC.
- Revisar el PCB y correr DRC antes de fabricar.
- Usar las librerias locales incluidas en
sym-lib-tableyfp-lib-table.
Nota sobre LTspice
Los archivos .asy y .lib pertenecen a simulacion LTspice. No se deben importar como simbolos o footprints KiCad; para KiCad se usan .kicad_sym, .kicad_mod y modelos .step/.wrl.
Parts
67| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 0.1uF | Capacitor_SMD:C_0805_2012Metric | C5, C7, C9, C10, C19, C20, C21, C23, C26 |
| 8 | 100nF | Capacitor_SMD:C_0805_2012Metric | C4, C6, C13, C14, C17, C18, C22, C24 |
| 8 | 49.9 | Resistor_SMD:R_0805_2012Metric | R2, R3, R7, R8, R9, R11, R12, R13 |
| 6 | 10uF | Capacitor_SMD:C_0805_2012Metric | C3, C11, C12, C15, C16, C25 |
| 4 | 1812L050/30PR | ProyectoPCB_Footprints:PPTC_1812L050_30PR_1812 | F3, F4, F5, F6 |
| 4 | MountingHole_3.2mm_M3_ISO7380_Pad | MountingHole:MountingHole_3.2mm_M3_ISO7380_Pad | H1, H2, H3, H4 |
| 3 | 10nF | Capacitor_SMD:C_0805_2012Metric | C1, C2, C8 |
| 2 | 1k | Potentiometer_THT:Potentiometer_Bourns_3296W_Vertical | RV1, RV2 |
| 2 | 33nF | Capacitor_SMD:C_0805_2012Metric | C27, C28 |
| 2 | INA826AIDR | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2, U4 |
| 2 | RJ45_8P8C_BBOX_SHIELDED | ProyectoPCB:BEL_2250066-1 | J_BBOX_PT100, J_BBOX_SM50 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric | R10 |
| 1 | 160 | Resistor_SMD:R_0805_2012Metric | R4 |
| 1 | 180 | Resistor_SMD:R_0805_2012Metric | R6 |
| 1 | 1k | Resistor_SMD:R_0805_2012Metric | R5 |
| 1 | 2.49k | Resistor_SMD:R_0805_2012Metric | R14 |
| 1 | 73.2k | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | 78L05 5V | Package_TO_SOT_SMD:SOT-89-3 | U8 |
| 1 | AST0250304 | ProyectoPCB:CONN_AST0250304_MZC | J_PT100_1 |
| 1 | AST0250404 | ProyectoPCB:AST0250404 | J_SM50 |
| 1 | LOGO | Images:logoucr | G*** |
| 1 | OPA2188AIDR | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U5 |
| 1 | REF3012AIDBZR | Package_TO_SOT_SMD:SOT-23 | U6 |
| 1 | SMF12CT1G | ProyectoPCB:SMF12CT1G_SC88_SOT363 | D1 |
| 1 | TPD4E1U06DBVR | ProyectoPCB:SOT-23-6 | U7 |
| 1 | TPD4E1U06DBVR | Package_TO_SOT_SMD:SOT-23-6 | U1 |
| 1 | TPS7A4901DGNT | ProyectoPCB_Footprints:TPS7A4901DGNT_DGN8_1P89X1P57 | U3 |
The 66 most common of 67 parts.
Similar boards
- 4 layers140 × 70 mm

- 4 layers67 × 38 mm

- 4 layers56.6 × 82.7 mm

- 2 layers45.2 × 65 mm

Precision Digital Micro Current Meter
jobitjoseph/Precision-Digital-Micro-Current-Meter
Keeping track of extremely low current levels is often essential when developing or testing low-power devices, especially in the field of embedded systems and battery-operated electronics.
67 parts7 - 4 layers54 × 42 mm

Nmos ldo board
ChenSiyun1234/nmos-ldo-board
Discrete NMOS LDO, 1.0 V at 1 A. 4-layer KiCad board, ngspice and thermal sims.
59 parts - 4 layers223 × 95 mm

Analog i
deimoscontrols/deimos
Realtime data acquisition and controls ecosystem, including hardware, firmware, and software.
568 parts44 - 2 layers55.9 × 121.3 mm

Tregatti stable
tregatti-tech/ESP32ECG
Open design/code version of ECG device based on esp32
147 parts9 - 4 layers129 × 79.5 mm

Questions
How big is the PCB PT100 SM50 PCB?
It measures 80 × 65 mm and has 2 copper layers, 1.6 mm thick.
What parts does the PCB PT100 SM50 use?
67 parts, built around the OPA2188AIDR-MS, INA826AIDRGR, REF3012AIDBZR and TPD4E1U06DBVR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PCB PT100 SM50 KiCad files?
From the VIXCA22/Proyecto_PCB_PT100_SM50 repository on GitHub, at the commit this page was made from: the board is PCB_PT100_SM50/PCB_PT100_SM50.kicad_pcb and its schematic PCB_PT100_SM50/PCB_PT100_SM50.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the PCB PT100 SM50 design in my own project?
Its repository states no licence, so its author keeps all rights: ask VIXCA22 before reusing the design.