2 layers28.3 × 39.8 mm
LevelShifter
gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software
21 parts5.1kGPL-3.0
2 layers34 × 21.4 mm
NAND AID
V10lator/NAND-AID23eMMC Recovery and Replacement Interposer
- Size
- 34 × 21.4 mm
- Copper layers
- 2
- Thickness
- 0.6 mm
- Parts
- 21
- Nets
- 9
- Pads
- 35
- Tracks, vias
- 242, 9
- Pours
- 29
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 14 Jan 2024
- Updated
- 2 Oct 2024
Overview
NAND AID is an open-source printed circuit board by V10lator, from the V10lator/NAND-AID repository on GitHub. It is a 2-layer board of 34 × 21.4 mm with 21 parts on 9 nets, routed with 242 tracks and 9 vias.
README
README.mdNAND-AID
eMMC Recovery and Replacement Interposer
See Using NAND-AID to repair a broken eMMC (fix 160-0103 system memory error) for more details.
Tested release files available at Releases.
Untested nightlies available at Actions.
Parts
21| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | NAND-AID:Small Half Hole | , , , , , , | |
| 7 | NAND-AID:Dump Pad | , , , , , , | |
| 1 | NAND-AID:GND hole | ||
| 1 | NAND-AID:3V3 Pad | ||
| 1 | NAND-AID:C_0805_2012Metric NO SILKSCREEN | C1 | |
| 1 | NAND-AID:GND Half Hole | ||
| 1 | LOGO Toad | NAND-AID:LOGO Toad | G*** |
| 1 | Micro SD slot | NAND-AID:Micro SD slot | |
| 1 | SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm EDITED SILKSCREEN | NAND-AID:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm EDITED SILKSCREEN | DSB |
Similar boards
- 2 layers171.2 × 72.9 mm
Amiga gfxcard before pour
mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog
21 parts1k - 2 layers93.9 × 46 mm
- 2 layers45.5 × 42.9 mm
Esphome han reader
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
21 parts915 - 2 layers31.8 × 14.5 mm
Esp prog
drandyhaas/KiCadRoutingTools
A set of Python/Rust tools to aid routing in KiCad
21 parts744MIT - 2 layers23.5 × 15.8 mm
QuiverAttachPCB
Arrow-air/project-quiver
Project Quiver documentation, designs, and project artifacts.
21 parts617CERN-OHL-S-2.0 - 2 layers69.9 × 41.3 mm
- 2 layers161.3 × 111.8 mm
Questions
How big is the NAND AID PCB?
It measures 34 × 21.4 mm and has 2 copper layers, 0.6 mm thick.
What parts does the NAND AID use?
21 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the NAND AID KiCad files?
From the V10lator/NAND-AID repository on GitHub, at the commit this page was made from: the board is NAND-AID.kicad_pcb and its schematic NAND-AID.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the NAND AID design in my own project?
Its repository states no licence, so its author keeps all rights: ask V10lator before reusing the design.