2 layers18.4 × 4.8 mm
Keycluster connector
UltimateHackingKeyboard/keycluster-electronics
The electronics files of the key cluster module
10 parts3
2 layers45.1 × 54.9 mm
Keycluster main
UltimateHackingKeyboard/keycluster-electronics3The electronics files of the key cluster module
- Size
- 45.1 × 54.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 36
- Nets
- 47
- Pads
- 175
- Tracks, vias
- 634, 73
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 16 May 2020
- Updated
- 15 Nov 2021
Overview
Keycluster main is an open-source printed circuit board by UltimateHackingKeyboard, from the UltimateHackingKeyboard/keycluster-electronics repository on GitHub. It is a 2-layer board of 45.1 × 54.9 mm with 36 parts on 47 nets, routed with 634 tracks and 73 vias.
It is built around the MKL03Z32VFK4, CMI126603D08 and MIC5504-3.3YM5. Its parts include 8 capacitors, 7 resistors, 5 switches, 4 diodes and 3 ICs. It belongs with the NXP (LPC, Kinetis, i.MX RT) boards of this library.
Main components
3
MKL03Z32VFK4
QFN-24-EP(4x4)QFN-24-EP(4x4) NXP MCU ROHSNXP SemiconductorsNXP MCU
CMI126603D08
插件100mA 12.8mm 20,000,000 Cycles 30V 5.8mm 6.9mm 7.25mm PC Pin Round Plunger 插件 Limit Switches ROHSKailhLimit Switches
MIC5504-3.3YM5
SOT-23-5-40℃~+125℃@(Tj) 1 120uVrms 15uA 180mV@(300mA) 3.3V 300mA 5.5V 75dB@(1kHz) Fixed Over Temperature Protection、Enable Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTECH PUBLICVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
README.mdUltimate Hacking Keyboard key cluster module
Contained are the schematics and board layout KiCad files for the Ultimate Hacking Keyboard key cluster module.
Make sure to clone this repo with:
git clone --recursive git@github.com:UltimateHackingKeyboard/keycluster-electronics.git
Parts
36| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 0.1uF | UGL:SM0603 | C1, C3, C4, C5, C7, C8 |
| 3 | 5.1K | UGL:SM0603 | R1, R3, R5 |
| 3 | RGB_LED | UGL:RGB_LED | D11, D12, D13 |
| 2 | 1.0mm | UGL:hole_1.0mm | hole, hole |
| 2 | 1uF | UGL:SM0603 | C2, C12 |
| 2 | 33 | UGL:SM0603 | R6, R7 |
| 2 | CMI126603D08 | UGL:CMI126603D08 | SW4, SW6 |
| 2 | S01_Socket | UGL:S01_Hybrid_Socket | SW1, SW3 |
| 1 | 200K | UGL:SM0603 | R4 |
| 1 | 330 | UGL:SM0603 | R2 |
| 1 | CONN_10 | UGL:Tag_Connect_2x5_Header_With_No_Legs_Parallel_Numbering | P7 |
| 1 | CONN_5 | UGL:UHK_Connector_TrackBall_Pcb | P2 |
| 1 | CONN_7 | UGL:FFC_Connector_51281-0794 | P8 |
| 1 | ESD | UGL:SC-74-TVS | U4 |
| 1 | FERRITE_BEAD | UGL:SM0603 | FB2 |
| 1 | IS31FL3199 | UGL:QFN-20_EP_3x3_Pitch0.4mm | U2 |
| 1 | LED | UGL:SM0603_Diode | D2 |
| 1 | LOGO | UGL:UHK_Logo_12x3.4_mm | G*** |
| 1 | MIC5504-3.3YM5 | UGL:SOT-23-5 | VR1 |
| 1 | MKL03Z32VFK4 | UGL:QFN-24-1EP_4x4mm_Pitch0.5mm | U1 |
| 1 | S01_Socket | UGL:S01_Hybrid_Socket_Backslash | SW2 |
| 1 | VAL** | UGL:hole_4.0mm | hole 2.2mm |
More from UltimateHackingKeyboard/keycluster-electronics
2- 2 layers15 × 13.2 mm
Keycluster trackball
UltimateHackingKeyboard/keycluster-electronics
The electronics files of the key cluster module
7 parts3
Similar boards
- 2 layers27.5 × 33 mm
Trackpoint main
UltimateHackingKeyboard/trackpoint-electronics
The electronics files of the trackpoint module
28 parts4 - 2 layers27.5 × 33.3 mm
Trackball
UltimateHackingKeyboard/trackball-electronics
The electronics files of the trackball module
36 parts1 - 2 layers136.4 × 123.4 mm
Left main
UltimateHackingKeyboard/uhk60v2-electronics
The electronics files of the UHK 60 v2
153 parts11 - 2 layers172 × 152.9 mm
- 2 layers22.9 × 36.7 mm
Usb2usb
tmk/USB2USB_Converter
USB to USB keyboard protocol converter supported by TMK keyboard firmware
26 parts152 - 2 layers78 × 130 mm
Lofence
kiu/lofence
LoFence is a LoRaWAN capable IoT electric fence monitoring system running on the The Things Network.
65 parts142MIT - 2 layers96.5 × 55 mm
- 2 layers120 × 130 mm
SingularitySurfer V1
nkrackow/SingularitySurfer-FPGA-Lock-In-Amplifier
Repository for the development of an FPGA based DSP Lock-In Amplifier
174 parts80MIT
Questions
How big is the Keycluster main PCB?
It measures 45.1 × 54.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Keycluster main use?
36 parts, built around the MKL03Z32VFK4, CMI126603D08 and MIC5504-3.3YM5. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Keycluster main KiCad files?
From the UltimateHackingKeyboard/keycluster-electronics repository on GitHub, at the commit this page was made from: the board is main/keycluster-main.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Keycluster main design in my own project?
Its repository states no licence, so its author keeps all rights: ask UltimateHackingKeyboard before reusing the design.