4 layers73 × 98 mm
ALBERT FLIGHTCOMPUTER
felixznr/ALBERT
Albert I was a rhesus macaque monkey and the first mammal launched on a rocket (V-2 Rocket "Blossom No. 3") on June 18, 1948.
161 partsMIT
4 layers74.8 × 74.8 mm
A1-FlightComputer
UVicRocketry/CoreSTMThis is the Core STM32 PCB with several of the commonly used sensors on it.
- Size
- 74.8 × 74.8 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 88
- Nets
- 100
- Pads
- 314
- Tracks, vias
- 326, 121
- Pours
- 81
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 28 Oct 2023
- Updated
- 16 Jul 2024
Overview
A1-FlightComputer is an open-source printed circuit board by UVicRocketry, from the UVicRocketry/CoreSTM repository on GitHub, published under the MIT licence. It is a 4-layer board of 74.8 × 74.8 mm with 88 parts on 100 nets, routed with 326 tracks and 121 vias.
It is built around the BMP390, W25N01GVZEIG and DSS14U. Its parts include 23 capacitors, 17 resistors, 9 diodes, 7 ICs and 7 connectors. It belongs with the STM32 boards of this library.
Main components
3
BMP390
LGA-10(2x2)-40℃~+85℃ 0.6pa/K 1.5uA 1.65V~3.6V 30Kpa~1.25bar 3pa 50pa I2C、SPI Integrated ADC and digital interface、Standby mode、On-chip temperature output Yes LGA-10(2x2) Pressure Sensors ROHSBosch SensortecPressure Sensors
W25N01GVZEIG
WSON-8-EP(6x8)-40℃~+85℃ 10 Years 100,000 cycles 104MHz 10uA 1Gbit 2.7V~3.6V 2ms 700us SPI WSON-8-EP(6x8) NAND FLASH ROHSWinbond ElecNAND FLASH
DSS14U
SOD-123FL-55℃~+150℃ 1 Independent 100uA@40V 1A 40A 40V 500mV@1A SOD-123FL Schottky Diodes ROHSSMCSchottky Diodes
README
README.mdCoreSTM
This is the Core STM32 PCB with several of the commonly used sensors on it.
Parts
88| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | ~ | TestPoint:TestPoint_THTPad_D1.0mm_Drill0.5mm | TP201, TP202, TP203, TP204, TP205, TP206, TP207, TP208, TP401, TP402, TP403 |
| 10 | 100nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C205, C206, C208, C209, C210, C214, C301, C302, C303, C304 |
| 9 | 240R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R205, R206, R209, R303, R304, R305, R306, R401, R402 |
| 4 | Conn_01x02_Socket | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J201, J202, J301, J302 |
| 4 | GREEN | LED_SMD:LED_1206_3216Metric | D301, D302, D303, D304 |
| 4 | ~ | MountingHole:MountingHole_3.2mm_M3_Pad | H101, H102, H103, H104 |
| 3 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R201, R203, R204 |
| 3 | 4.7uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C207, C213, C403 |
| 3 | AMBER | LED_SMD:LED_1206_3216Metric | D201, D403, D404 |
| 2 | 10uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C401, C402 |
| 2 | 13pF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C203, C204 |
| 2 | 22R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R207, R208 |
| 2 | 22uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C404, C405 |
| 2 | 2pF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C201, C202 |
| 2 | 4k7 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R301, R302 |
| 2 | DSS14U | Diode_SMD:D_SOD-123F | D401, D402 |
| 2 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW201, SW202 |
| 2 | SolderJumper_2_Bridged | Jumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP201, JP202 |
| 1 | 10nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C211 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R202 |
| 1 | 1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C212 |
| 1 | 32.768kHz LSE | Crystal:Crystal_SMD_G8-2Pin_3.2x1.5mm_HandSoldering | Y201 |
| 1 | 8MHz HSE | Crystal:Crystal_SMD_0603-2Pin_6.0x3.5mm | Y202 |
| 1 | ADXL314 | Package_CSP:LFCSP-32-1EP_5x5mm_P0.5mm_EP3.6x3.6mm | U303 |
| 1 | AZ1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U402 |
| 1 | AZ1117-5.0 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U401 |
| 1 | BMP390 | footprints:LGA10_BMP390_BOS | U301 |
| 1 | Conn_02x05_Odd_Even | Connector_PinSocket_2.54mm:PinSocket_2x05_P2.54mm_Vertical | J203 |
| 1 | LOGO | uvr-logo:uvr-logo | G*** |
| 1 | LSM6DSOTR | LSM:LGA-14L_2P5X3X0P86_STM | U302 |
| 1 | PWR_IN | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J401 |
| 1 | Q_NMOS_GSD | Package_TO_SOT_SMD:SOT-23 | Q301 |
| 1 | STM32L475RCTx | Package_QFP:LQFP-64_10x10mm_P0.5mm | U201 |
| 1 | SW_SPDT | Button_Switch_THT:SW_CuK_OS102011MA1QN1_SPDT_Angled | SW203 |
| 1 | SW_SPST | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | SW401 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Amphenol_10104110_Horizontal | J402 |
| 1 | W25N01GVZEIG | Package_SON:WSON-8-1EP_8x6mm_P1.27mm_EP3.4x4.3mm | U202 |
Similar boards
- 2 layers100 × 60 mm
- 4 layers84.8 × 67 mm
- 4 layers40 × 40 mm
- 2 layers222 × 142 mm
- 6 layers116 × 126 mm
- 4 layers55 × 55 mm
RBoard
pms67/LittleBrain-STM32F4-Sensorboard
STM32F4-based PCB interfacing with a variety of sensors.
90 parts339 - 2 layers15 × 31 mm
Questions
How big is the A1-FlightComputer PCB?
It measures 74.8 × 74.8 mm and has 4 copper layers, 1.6 mm thick.
What parts does the A1-FlightComputer use?
88 parts, built around the BMP390, W25N01GVZEIG and DSS14U. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the A1-FlightComputer KiCad files?
From the UVicRocketry/CoreSTM repository on GitHub, at the commit this page was made from: the board is A1-FlightComputer-Hardware/A1-FlightComputer.kicad_pcb and its schematic A1-FlightComputer-Hardware/A1-FlightComputer.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the A1-FlightComputer design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).