Skip to the content
2 layersNPS, the printed circuit board in 3D

Source and documentation files for the SDS sensor network

Copper layers
2
Thickness
1.6 mm
Parts
48
Nets
52
Pads
197
Tracks, vias
432, 34
Pours
5
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
19 Aug 2019
Updated
30 Nov 2020

Overview

NPS is an open-source printed circuit board by UVA-DSI, from the UVA-DSI/sensenet repository on GitHub, published under the CC-BY-SA-4.0 licence. It is a 2-layer board with 48 parts on 52 nets, routed with 432 tracks and 34 vias.

It is built around the RFM95W-915S2, FBMH3216HM221NT and MBR120. Its parts include 15 capacitors, 8 connectors, 6 resistors, 4 ICs and 2 diodes. It belongs with the sensors and measurement boards and the SAM D and SAM boards of this library.

Main components

3

README

README.md

Sensenet: networked environmental sensing for all

This repository contains the documentation for the 'Sensenet' project. Here you will find the software and hardware sources for the backend, frontend, and sensor devices we use.

What is included in this repository

We organized projects in folders with their resources (hardware, firmware, software, datasheets, and relevant documentation).

We also included 'playbooks' for the backend configuration under the directory 'ansible' and 'conf'. They are meant to provision the complete backend which includes: MQTT broker (mosquitto), timeseries database (influx-db), and a visualization tool (Grafana). For more info about the line protocol used for the timeseries db, check our documentation.

Each directory contains information about the sensors we are testing. For more details, check out the 'sensor-specification' document and the 'datasheets' directory.

Implementations

We use different sensors, microcontrollers, and tools for different implementations. You can get more information about each set-up following the links below:

Contact and licensing info

Check the AUTHORS file for the list of contributors. For more information about each project, check the file CONTRIBUTORS.

All software is licensed as GPLv3; all hardware is licensed as CERN-OHL-S-v2, and all documentation is released as 'CC-BY-SA-4.0 International', unless specified in the LICENSE file included in the directory or in the header of source files.

Happy environmental sensing and hw hacking!

Parts

48
QtyValueFootprintReferences
6100nCapacitor_SMD:C_1206_3216Metric_Pad1.42x1.75mm_HandSolderC3, C5, C8, C12, C13, C15
310uCapacitor_SMD:C_1206_3216Metric_Pad1.42x1.75mm_HandSolderC1, C10, C14
210kResistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolderR3, R6
222pF NPOCapacitor_SMD:C_1206_3216Metric_Pad1.42x1.75mm_HandSolderC6, C9
1
110uInductor_SMD:L_1206_3216Metric_Pad1.42x1.75mm_HandSolderL1
110uFCapacitor_SMD:C_1206_3216Metric_Pad1.42x1.75mm_HandSolderC4
11kResistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolderR1
11uCapacitor_SMD:C_1206_3216Metric_Pad1.42x1.75mm_HandSolderC11
12.2kResistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolderR5
12.2uCapacitor_SMD:C_1206_3216Metric_Pad1.42x1.75mm_HandSolderC2
1330Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolderR2
14.7uCapacitor_SMD:C_1206_3216Metric_Pad1.42x1.75mm_HandSolderC7
1400Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolderR4
1ATSAML21E18B-AUTPackage_QFP:TQFP-32_7x7mm_P0.8mmU4
1Conn_01x02Connector_JST:JST_XH_S2B-XH-A-1_1x02_P2.50mm_HorizontalJ3
1Conn_01x06Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_VerticalJ4
1Conn_01x08Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_VerticalJ5
1Conn_01x14Connector_PinHeader_2.54mm:PinHeader_1x14_P2.54mm_VerticalJ6
1Conn_ARM_JTAG_SWD_10Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_VerticalJ1
1Conn_Coaxialfp:Connector_Coaxial_SMA_edge_combinedJ7
1FBMH3216HM221NTInductor_SMD:L_1206_3216Metric_Pad1.42x1.75mm_HandSolderFB1
1HC49SCrystal:Crystal_HC49-U_VerticalY1
1LEDLED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolderD2
1LTC4070Package_SO:MSOP-8-1EP_3x3mm_P0.65mm_EP1.68x1.88mmU2
1MBR120Diode_SMD:D_1206_3216Metric_Pad1.42x1.75mm_HandSolderD1
1MCP1812APackage_TO_SOT_SMD:SOT-23_HandsolderingU1
1NTHS0402...Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolderTH1
1RFM95W-915S2fp:RFM95WU3
1SW_PushButton_Switch_SMD:SW_SPST_PTS645SW1
1Si2365EDSPackage_TO_SOT_SMD:TSOT-23Q1
1Si2365EDSTO_SOT_Packages_SMD:TSOT-23Q2
1USB_B_MicroConnector_USB:USB_Micro-B_Molex-105017-0001J2
1Wire Ant.Connector_Wire:SolderWire-0.75sqmm_1x01_D1.25mm_OD2.3mmJ8

The 43 most common of 48 parts.

More from UVA-DSI/sensenet

1
  • 2 layers14.4 × 17 mmPms7003-conn, the printed circuit board in 3D

    Pms7003-conn

    UVA-DSI/sensenet

    Source and documentation files for the SDS sensor network

    3 parts2CC-BY-SA-4.0

Similar boards

  • 2 layersBigdot, the printed circuit board in 3D

    Bigdot

    unixjazz/bigdot

    librelab::Big Dot board

    54 parts5
  • 2 layers60 × 121.3 mmEko badge-2024, the printed circuit board in 3D

    Eko badge-2024

    ElectronicCats/badge-EKOParty-2024

    Badge Oficial de EkoParty 2024

    63 parts2
  • 4 layers39 × 99 mmRoamer, the printed circuit board in 3D

    Roamer

    ezzatisawesome/roamer

    105 parts
  • 2 layers83.9 × 108.8 mmOshwi ESP8266 LORA, the printed circuit board in 3D

    Oshwi ESP8266 LORA

    hulkco/oshwi

    Upload "Oshwi" Badge for OshwDem 2017 a Coruña

    32 parts15
  • 2 layers98.5 × 34 mmPulse LoRa, the printed circuit board in 3D

    Pulse LoRa

    risejohan/2Bit

    In this repo we can see some designs with free use for the community, 2 Bit electronic

    86 parts17
  • 4 layers45.7 × 90.3 mmIo v2-Board, the printed circuit board in 3D

    Io v2-Board

    Maeswoon/UNHSEDS

    great people building dream rockets

    81 parts11
  • 6 layers100 × 60 mmAether, the printed circuit board in 3D

    Aether

    nasheed-x/aether

    Aether is a versatile flight computer for testing flight hardware and software, focusing on sensor fusion to monitor rocket states and interface with on-board systems.

    180 parts10

Questions

What parts does the NPS use?

48 parts, built around the RFM95W-915S2, FBMH3216HM221NT and MBR120. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the NPS KiCad files?

From the UVA-DSI/sensenet repository on GitHub, at the commit this page was made from: the board is projects/NPS/board/board.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the NPS design in my own project?

Its repository publishes it under the CC-BY-SA-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).