4 layers65.6 × 52.7 mm
4 layers88.4 × 52.7 mm
InductiveSensor LDC1612 Rev3.2
UM-Battery-Control-Group/LDC_Dual_CanLDC dual channel code for V2 boards
- Size
- 88.4 × 52.7 mm
- Copper layers
- 4
- Thickness
- 1.36 mm
- Parts
- 66
- Nets
- 58
- Pads
- 198
- Tracks, vias
- 1,322, 85
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 4 Jan 2024
- Updated
- 27 Jul 2026
Overview
InductiveSensor LDC1612 Rev3.2 is an open-source printed circuit board by UM-Battery-Control-Group, from the UM-Battery-Control-Group/LDC_Dual_Can repository on GitHub. It is a 4-layer board of 88.4 × 52.7 mm with 66 parts on 58 nets, routed with 1,322 tracks and 85 vias.
It is built around the STM32F042K6T7, SN65HVD230DR and CUS10S30,H3F, with the 5988E60107F, TSM-104-01-T-SV and XC53G2-8.000-F12NJHPK among its other parts. Its parts include 22 capacitors, 8 resistors, 5 ICs, 5 crystals and 3 diodes. It belongs with the STM32 boards of this library.
Main components
6
STM32F042K6T7
LQFP-32(7x7)-40℃~+105℃ 1.65V~3.6V 12bit 26 32 Bit 32KB 48MHz 6KB ARM Cortex-M0 Built-in FLASH LQFP-32(7x7) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)
SN65HVD230DR
SOP-8CAN TransceiversTokmas
CUS10S30,H3F
SC-76(SOD-323)1 Independent 1A 230mV@100mA 30V 500uA@30V 5A SC-76(SOD-323) Schottky Diodes ROHSToshibaSchottky Diodes5988E60107F
1204LED Indication - DiscreteDialight
TSM-104-01-T-SV
SMD,P=2.54mm-55℃~+105℃ 1 1x4P 2.54mm 2.54mm 4P 5.84mm Black Phosphor bronze Pin Header Surface Mount,Vertical Tin SMD,P=2.54mm Pin Headers ROHSSamtecPin Headers
XC53G2-8.000-F12NJHPK
SMD5032-2PCrystalsHCI
README
README.mdLDCquadCan
can based LDC sensor
Forgot to tie boot0 to ground so need to set nboot option in cube programmer
Parts
66| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 100nF | Umich_Project_Rescue:CAP0805 | C5, C8, C9, C10, C11, C15, C16, C21 |
| 8 | 1mm Test Point | Umich_Project_Rescue:TP_1MM | TP1, TP2, TP6, TP9, TP14, TP15, TP20, TP26 |
| 4 | 18pF | Umich_Project_Rescue:CAP0805 | C3, C4, C17, C18 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 3 | 10k | Umich_Project_Rescue:R0603 | R3, R6, R8 |
| 3 | Fiducial | Umich_Project_Rescue:FID | FID1, FID2, FID3 |
| 2 | 10uF | Umich_Project_Rescue:CAP1206_TAJA | C1, C13 |
| 2 | 15pF | Umich_Project_Rescue:C0603 | C6, C7 |
| 2 | 2170640021 | Umich_Project_Rescue:CONN_2170630000-SD_02_MOL | X1, X4 |
| 2 | 2170640041 | Umich_Project_Rescue:CONN_2170630000-SD_04_MOL | X2, X3 |
| 2 | 4.7k | Umich_Project_Rescue:RES0805 | R1, R2 |
| 2 | 60.4R | Umich_Project_Rescue:R0603 | R5, R7 |
| 2 | CUS10S30,H3F | Umich_Project_Rescue:USC_TOS | D1, D2 |
| 2 | TSM-102-01-X-SV | Umich_Project_Rescue:SAMTEC_TSM-102-01-X-SV | J1, J2 |
| 2 | TestPoint | Umich_Project_Rescue:TP_1MM | TP3, TP4 |
| 1 | 1.5k | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | 1uF | Umich_Project_Rescue:CAP0805 | C2 |
| 1 | 3.3V/1A | Umich_Project_Rescue:VSON_DRB8 | U4 |
| 1 | 330nF | Umich_Project_Rescue:C0603 | C19 |
| 1 | 4.7nF | Umich_Project_Rescue:C0603 | C12 |
| 1 | 4.7uF | Capacitor_SMD:C_1206_3216Metric | C22 |
| 1 | 4.7uF | Umich_Project_Rescue:CAP0805 | C14 |
| 1 | 40MHz | Umich_Project_Rescue:KC2520Z_KYO | Q1 |
| 1 | 510pF | Umich_Project_Rescue:CAP0805 | C20 |
| 1 | GRN-YLW | LED_SMD:LED_0603_1608Metric | LED1 |
| 1 | I2C Humidity/Temp Sensor | Umich_Project_Rescue:WSON_DMB6 | U5 |
| 1 | Inductive Sensor 2Ch | Umich_Project_Rescue:LDC1612 | U1 |
| 1 | LOGO | Umich_Project_Rescue:ST_Logo | G*** |
| 1 | SN65HVD230DR | Umich_Project_Rescue:SOIC_8 | U3 |
| 1 | STM32F042K6T7 | Umich_Project_Rescue:LQFP-32 | U2 |
| 1 | SenseCoil | Umich_Project_Rescue:COIL_4L | L1 |
| 1 | TSM-104-01-T-SV | Umich_Project_Rescue:CONN_TSM-104-01-T-SV_SAI | X5 |
| 1 | XC53G2-8.000-F12NJHPK | Umich_Project_Rescue:XTAL_NX5032_NDK | XTAL1 |
More from UM-Battery-Control-Group/LDC_Dual_Can
1Similar boards
- 4 layers60 × 56.1 mm
- 2 layers41.3 × 10.7 mm
- 2 layers50 × 50 mm
Binary tree
cillian64/binary-tree
A simple electronic christmas tree ornament, intended for teaching electronics.
30 parts - 4 layers99.8 × 94.6 mm
- 4 layers99.8 × 94.6 mm
Oresat proto card
oresat/oresat-proto-card
Prototype card for the OreSat bus. Requires the OreSat Backplane.
128 parts9 - 4 layers99.8 × 94.6 mm
- 2 layers40.8 × 10.6 mm
- 4 layers170 × 100 mm
Leviathan V1.3
MotorDynamicsLab/Leviathan
Leviathan Main Controller for Voron 2 / Trident 3D Printers
420 parts124GPL-3.0
Questions
How big is the InductiveSensor LDC1612 Rev3.2 PCB?
It measures 88.4 × 52.7 mm and has 4 copper layers, 1.36 mm thick.
What parts does the InductiveSensor LDC1612 Rev3.2 use?
66 parts, built around the STM32F042K6T7, SN65HVD230DR, CUS10S30,H3F and 5988E60107F. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the InductiveSensor LDC1612 Rev3.2 KiCad files?
From the UM-Battery-Control-Group/LDC_Dual_Can repository on GitHub, at the commit this page was made from: the board is L_Sense_Board_Rev3.2/InductiveSensor_LDC1612_Rev3.2/InductiveSensor_LDC1612_Rev3.2.kicad_pcb and its schematic L_Sense_Board_Rev3.2/InductiveSensor_LDC1612_Rev3.2/BoardIF.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the InductiveSensor LDC1612 Rev3.2 design in my own project?
Its repository states no licence, so its author keeps all rights: ask UM-Battery-Control-Group before reusing the design.