Skip to the content
4 layers85 × 56 mmBearcar thalamus, the printed circuit board in 3D

Bearcar thalamus

UCA-RBEG/bearcar_ee

electrical and electronics designs for BearCart

Size
85 × 56 mm
Copper layers
4
Thickness
1.6 mm
Parts
25
Nets
72
Pads
155
Tracks, vias
97, 1
Pours
1
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
16 Apr 2025
Updated
2 Jun 2026

Overview

Bearcar thalamus is an open-source printed circuit board by UCA-RBEG, from the UCA-RBEG/bearcar_ee repository on GitHub, published under the GPL-3.0 licence. It is a 4-layer board of 85 × 56 mm with 25 parts on 72 nets, routed with 97 tracks and 1 via.

Its parts include 8 connectors, 4 resistors, 2 ICs, 2 switches and 1 capacitor. It belongs with the RP2040 boards of this library.

README

README.md

Electrical Engineering for BearCar

Schematic

schematic

PCB

pcb

Parts

25
QtyValueFootprintReferences
6MountingHole_2.7mm_M2.5MountingHole:MountingHole_2.7mm_M2.5MH1, MH2, MH3, MH3, MH3, MH4
3220RResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR1, R2, R3
1100nCapacitor_THT:C_Disc_D4.7mm_W2.5mm_P5.00mmC1
11kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR4
13V3_OUTConnector_PinHeader_2.54mm:PinHeader_2x02_P2.54mm_VerticalJ7
15VIN_RPiConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalSW1
1ADCConnector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_VerticalJ9
1ESCConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ3
1GPIOConnector_PinSocket_2.54mm:PinSocket_2x20_P2.54mm_VerticalJ1
1GY-521GY-521:HiLetGo-GY-521U2
1LED_RKGBLED_THT:LED_D5.0mm-4_RGB_Wide_PinsD1
1LOGOlogo_lib:bear_logoG***
1PWMConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ4
1PicoRaspberryPi_Pico_THT:RaspberryPi_Pico_THTU1
1SPARE_GPIOConnector_PinHeader_2.54mm:PinHeader_1x18_P2.54mm_VerticalJ5
1SRVConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_HorizontalJ2
1SW_PushButton_Switch_THT:SW_PUSH_6mm_H5mmSW2
1VBUS_OUTConnector_PinHeader_2.54mm:PinHeader_2x02_P2.54mm_VerticalJ6

Similar boards

  • 4 layers90 × 90 mmPower distribution, the printed circuit board in 3D

    Power distribution

    menloresearch/asimov-1

    v1 of Asimov, an open-source humanoid robot

    25 parts1.4kCERN-OHL-S-2.0
  • 4 layers16 × 22.8 mmReadout 30pin top, the printed circuit board in 3D

    Readout 30pin top

    opentac/opentac

    OpenTac: open tools to design, fabricate, read and simulate flex-PCB tactile skins that sense normal and shear force, for any robot surface.

    25 parts92MIT
  • 4 layers40 × 30.3 mmAPmini, the printed circuit board in 3D

    APmini

    ManiacalLabs/AllPixel

    Firmware and Board Designs for the AllPixel LED Controller Board: Please direct questions and support requests to https://forum.maniacallabs.com/c/hardware - The Issues list here should be reserved for actual bugs.

    25 parts56MIT
  • 4 layers18.6 × 43.1 mmNfc sense, the printed circuit board in 3D

    Nfc sense

    unsurv/NFC_temp

    passive temperature NFC tag

    25 parts49
  • 4 layers63.5 × 27.9 mmTangNano9K5V, the printed circuit board in 3D

    TangNano9K5V

    ryomuk/tangnano-5V

    5V tolerant interface for Tang Nano

    25 parts45MIT
  • 4 layers18 × 13 mmMumo, the printed circuit board in 3D

    Mumo

    kounocom/Mumo

    A compact 13×18mm IMU module featuring the TDK InvenSense ICM-45686 6-axis IMU with integrated 32.768kHz clock and QST QMC6309H 3-axis magnetometer.

    25 parts41CERN-OHL-S-2.0
  • 4 layers13.6 × 19.4 mmMiniCO2, the printed circuit board in 3D

    MiniCO2

    nup002/miniCO2

    A miniature USB CO2 sensor

    25 parts40
  • 4 layers98.8 × 85.1 mmSsc, the printed circuit board in 3D

    Ssc

    jmthompson/ssc

    Simple Serial Card, an Apple Super Serial Card clone

    25 parts37

Questions

How big is the Bearcar thalamus PCB?

It measures 85 × 56 mm and has 4 copper layers, 1.6 mm thick.

What parts does the Bearcar thalamus use?

25 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Bearcar thalamus KiCad files?

From the UCA-RBEG/bearcar_ee repository on GitHub, at the commit this page was made from: the board is bearcar_thalamus/bearcar_thalamus.kicad_pcb and its schematic bearcar_thalamus/bearcar_thalamus.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Bearcar thalamus design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).