
Wireless telemetry pcb
UBCO-Motorsports/WirelessTelemetryCapstone
Please see the UBCO Motorsports wiki page for a full description: https://sites.google.com/view/ubcomotorsportswiki/electronics/wireless-telemetry-capstone

Please see the UBCO Motorsports wiki page for a full description: https://sites.google.com/view/ubcomotorsportswiki/electronics/wireless-telemetry-capstone
ControllerBoard2 is an open-source printed circuit board by UBCO-Motorsports, from the UBCO-Motorsports/WirelessTelemetryCapstone repository on GitHub, published under the MIT licence. It is a 2-layer board of 26.2 × 43.2 mm with 34 parts on 40 nets, routed with 285 tracks and 52 vias.
It is built around the BSS84. Its parts include 12 resistors, 8 capacitors, 6 diodes, 3 connectors and 2 ICs. It belongs with the STM32 boards of this library.
Please see the UBCO Motorsports wiki page for a full description: https://sites.google.com/view/ubcomotorsportswiki/electronics/wireless-telemetry-capstone
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 10k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R1, R5, R6, R7, R8, R13 |
| 5 | 220 | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R2, R10, R11, R12, R14 |
| 3 | 100n | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C1, C4, C9 |
| 3 | 10u | Capacitor_SMD:CP_Elec_4x5.4 | C6, C7, C10 |
| 3 | LEDG | LED_SMD:LED_0603_1608Metric | D2, D3, D5 |
| 2 | 8p | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C2, C3 |
| 2 | LEDR | LED_SMD:LED_0603_1608Metric | D1, D6 |
| 1 | 1.3k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R9 |
| 1 | 30v | Diode_SMD:D_SOD-123 | D4 |
| 1 | 8Mhz | digikey-footprints:SMD-2_3.2x2.5mm | Y1 |
| 1 | BSS84 | digikey-footprints:SOT-23-3 | Q1 |
| 1 | Main Header | Lukas_Library:Breadboard_Center_32pin | J1 |
| 1 | RESET | Lukas_Library:PTS636 SK25F SMTR LFS | S1 |
| 1 | STM32F303K8Tx | Package_QFP:LQFP-32_7x7mm_P0.8mm | U1 |
| 1 | SWD | Connector_PinHeader_1.27mm:PinHeader_2x05_P1.27mm_Vertical | J2 |
| 1 | UJA1075A-3.3 | Package_SO:HTSSOP-32-1EP_6.1x11mm_P0.65mm_EP5.2x11mm_Mask4.11x4.36mm_ThermalVias | U2 |
| 1 | WD_Disable | Connector_PinHeader_1.27mm:PinHeader_2x01_P1.27mm_Vertical | J3 |

UBCO-Motorsports/WirelessTelemetryCapstone
Please see the UBCO Motorsports wiki page for a full description: https://sites.google.com/view/ubcomotorsportswiki/electronics/wireless-telemetry-capstone

UtilitechAS/amsreader-firmware
ESP8266 and ESP32 compatible firmware to read, interpret and publish data to MQTT from smart electrical meters, both DLMS and DSMR is supported



giant-axon/lu.i-neuron-pcb
Lu.i is an electronic neuron circuit mimicking and illustrating the basic dynamics of real, biological neurons. The printed circuit board (PCB) features a configurable, fully analog implementation of the leaky…

antmicro/snapdragon-845-baseboard
https://antmicro.com/blog/2022/04/open-source-snapdragon-845-baseboard/

7west/PicoTop
A very basic computer & OS based on the RP2350 microcontroller


It measures 26.2 × 43.2 mm and has 2 copper layers, 1.6 mm thick.
34 parts, built around the BSS84. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the UBCO-Motorsports/WirelessTelemetryCapstone repository on GitHub, at the commit this page was made from: the board is ControlBoard2/Kicad_Project/ContollerBoard2/ControllerBoard2.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).