Skip to the content
2 layers26.2 × 43.2 mmControllerBoard, the printed circuit board in 3D
Size
26.2 × 43.2 mm
Copper layers
2
Thickness
1.6 mm
Parts
35
Nets
51
Pads
236
Tracks, vias
368, 51
Pours
2
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
20 Nov 2019
Updated
21 Sep 2020

Overview

ControllerBoard is an open-source printed circuit board by UBCO-Motorsports, from the UBCO-Motorsports/ControlBoard repository on GitHub, published under the Unlicense licence. It is a 2-layer board of 26.2 × 43.2 mm with 35 parts on 51 nets, routed with 368 tracks and 51 vias.

It is built around the BSS84. Its parts include 14 resistors, 8 capacitors, 6 diodes, 3 connectors and 2 ICs.

Main components

1

Parts

35
QtyValueFootprintReferences
610kResistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolderR1, R5, R6, R7, R8, R13
5220Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolderR2, R10, R11, R12, R14
4100nCapacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolderC1, C4, C5, C9
31.3kResistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolderR3, R4, R9
310uCapacitor_SMD:CP_Elec_4x5.4C6, C7, C10
3LEDGLED_SMD:LED_0603_1608MetricD2, D3, D5
2LEDRLED_SMD:LED_0603_1608MetricD1, D6
130vDiode_SMD:D_SOD-123D4
14.7nCapacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolderC8
1BSS84digikey-footprints:SOT-23-3Q1
1FS32K116digikey-footprints:LQFP-48_7x7mmU1
1Main HeaderLukas_Library:Breadboard_Center_32pinJ1
1RESETLukas_Library:PTS636 SK25F SMTR LFSS1
1SWDConnector_PinHeader_1.27mm:PinHeader_2x05_P1.27mm_VerticalJ2
1UJA1075APackage_SO:HTSSOP-32-1EP_6.1x11mm_P0.65mm_EP5.2x11mm_Mask4.11x4.36mm_ThermalViasU2
1WD_DisableConnector_PinHeader_1.27mm:PinHeader_2x01_P1.27mm_VerticalJ3

Similar boards

  • 2 layers33.7 × 97.8 mmHAN ESP TSS721, the printed circuit board in 3D

    HAN ESP TSS721

    UtilitechAS/amsreader-firmware

    ESP8266 and ESP32 compatible firmware to read, interpret and publish data to MQTT from smart electrical meters, both DLMS and DSMR is supported

    29 parts470
  • 2 layers44.2 × 29.3 mmI2c tiny usb, the printed circuit board in 3D

    I2c tiny usb

    harbaum/I2C-Tiny-USB

    Cheap and simple I²C to USB interface

    27 parts454
  • 2 layers45 × 58.2 mmOpentama, the printed circuit board in 3D

    Opentama

    Sparkr-tech/opentama

    An open-source reference design for MCUGotchi

    65 parts237
  • 2 layers98.5 × 59.8 mmNeuron, the printed circuit board in 3D

    Neuron

    giant-axon/lu.i-neuron-pcb

    Lu.i is an electronic neuron circuit mimicking and illustrating the basic dynamics of real, biological neurons. The printed circuit board (PCB) features a configurable, fully analog implementation of the leaky…

    90 parts73CERN-OHL-S-2.0
  • 6 layers100 × 70 mmSa800u baseboard hw, the printed circuit board in 3D

    Sa800u baseboard hw

    antmicro/snapdragon-845-baseboard

    https://antmicro.com/blog/2022/04/open-source-snapdragon-845-baseboard/

    616 parts70Apache-2.0
  • 2 layers75 × 40 mmPicoTop Board Rev2, the printed circuit board in 3D

    PicoTop Board Rev2

    7west/PicoTop

    A very basic computer & OS based on the RP2350 microcontroller

    86 parts66
  • 4 layers50 × 59 mmKapula, the printed circuit board in 3D

    Kapula

    tejeez/geckokapula

    EFR32-based handheld transceiver

    166 parts65
  • 6 layers150 × 100 mmNV Meter rev b, the printed circuit board in 3D

    NV Meter rev b

    curtisseizert/Nanovoltmeter

    A low noise nanovoltmeter design files and code

    552 parts44

Questions

How big is the ControllerBoard PCB?

It measures 26.2 × 43.2 mm and has 2 copper layers, 1.6 mm thick.

What parts does the ControllerBoard use?

35 parts, built around the BSS84. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the ControllerBoard KiCad files?

From the UBCO-Motorsports/ControlBoard repository on GitHub, at the commit this page was made from: the board is KiCad_Project/ControllerBoard.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the ControllerBoard design in my own project?

Its repository publishes it under the Unlicense licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).