

- Size
- 35 × 35 mm
- Copper layers
- 4
- Thickness
- 1.22 mm
- Parts
- 102
- Nets
- 85
- Pads
- 343
- Tracks, vias
- 590, 400
- Pours
- 32
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 14 Feb 2025
- Updated
- 16 Sep 2025
Overview
Control is an open-source printed circuit board by Tomoshibi-technology, from the Tomoshibi-technology/MovingDisplay3-Circuit repository on GitHub. It is a 4-layer board of 35 × 35 mm with 102 parts on 85 nets, routed with 590 tracks and 400 vias.
It is built around the STM32G473CET6, MAX3485ED and 1N5819WS, with the S8550, SS2040FL and SSM3J332R,LF among its other parts. Its parts include 36 resistors, 31 capacitors, 11 diodes, 6 ICs and 4 connectors. It belongs with the STM32 boards of this library.
Main components
6STM32G473CET6
LQFP-48(7x7)-40℃~+85℃ 1.71V~3.6V 128KB 12bit 12bit 170MHz 32 Bit 38 512KB ARM Cortex-M4 Built-in FLASH LQFP-48(7x7) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)MAX3485ED
SOP-8-40℃~+85℃ 1 1 10Mbps 1mA 3.135V~3.465V 32 Half-Duplex Transceiver ±8kV SOP-8 RS-485 / RS-422 ICs ROHSHTC Korea TAEJIN TechRS-485 / RS-422 ICs1N5819WS
SOD-3231 Independent 1A 25A 40V 500uA@40V 600mV@1A SOD-323 Schottky Diodes ROHSGuangdong HottechSchottky DiodesS8550
SOT-23-55℃~+150℃ 1 PNP 100nA 120 150MHz 25V 300mW 500mA 5V 600mV PNP SOT-23 Bipolar (BJT) ROHSJiangsu Changjing Electronics Technology (CJ)Bipolar (BJT)SS2040FL
SOD-123FLSOD-123FL Schottky Diodes ROHSFUXINSEMISchottky DiodesSSM3J332R,LF
SOT-23F1 P-Channel 1.2V 144mΩ@1.8V 1W 30V 560pF 65pF 6A 8.2nC@4.5V 80pF P-Channel SOT-23F MOSFETs ROHSToshibaMOSFETs
README
README.mdMovingDisplay3-Circuit
Parts
102| Qty | Value | Footprint | References |
|---|---|---|---|
| 14 | 10k | Resistor_SMD:R_0402_1005Metric | R1, R3, R6, R7, R8, R9, R10, R14, R16, R23, R31, R32, R33, R37 |
| 9 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C1, C2, C5, C6, C7, C8, C19, C20, C25 |
| 6 | 1N5819WS | Diode_SMD:D_SOD-323_HandSoldering | D1, D4, D6, D9, D10, D11 |
| 5 | 10uF | Capacitor_SMD:C_1206_3216Metric | C10, C14, C15, C26, C27 |
| 4 | 2.2k | Resistor_SMD:R_0402_1005Metric | R25, R26, R27, R28 |
| 4 | TestPoint | TestPoint:TestPoint_Pad_1.0x1.0mm | TP1, TP2, TP3, TP4 |
| 3 | 100 | Resistor_SMD:R_0603_1608Metric | R34, R35, R36 |
| 3 | 1k | Resistor_SMD:R_0402_1005Metric | R2, R4, R5 |
| 3 | 20k | Resistor_SMD:R_0402_1005Metric | R11, R15, R24 |
| 3 | 330pF | Capacitor_SMD:C_0603_1608Metric | C21, C22, C23 |
| 2 | 10uF | Capacitor_SMD:C_0805_2012Metric | C17, C18 |
| 2 | 120 | Resistor_SMD:R_0402_1005Metric | R29, R30 |
| 2 | 1nF | Capacitor_SMD:C_0402_1005Metric | C30, C31 |
| 2 | 1uF | Capacitor_SMD:C_0603_1608Metric | C12, C13 |
| 2 | 1uF | Capacitor_SMD:C_0402_1005Metric | C24, C29 |
| 2 | 22pF | Capacitor_SMD:C_0603_1608Metric | C3, C4 |
| 2 | 22uF | Capacitor_SMD:C_0805_2012Metric | C11, C28 |
| 2 | 2k | Resistor_SMD:R_0402_1005Metric | R20, R21 |
| 2 | Blue | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D2, D3 |
| 2 | Conn_01x05_MountingPin | Connector_Molex:Molex_PicoBlade_53261-0571_1x05-1MP_P1.25mm_Horizontal | J3, J4 |
| 2 | Green | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D7, D8 |
| 2 | Jumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP1, JP2 |
| 2 | MAX3485 | Package_SO:SOP-8_3.9x4.9mm_P1.27mm | U3, U4 |
| 1 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C16 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric | R19 |
| 1 | 16MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric | R17 |
| 1 | 1uH | Inductor_SMD:L_0603_1608Metric | L1 |
| 1 | 2N7002 | Package_TO_SOT_SMD:SOT-23 | Q2 |
| 1 | 4.7uF | Capacitor_SMD:C_0603_1608Metric | C9 |
| 1 | 5.1k | Resistor_SMD:R_0402_1005Metric | R12 |
| 1 | 7.5k | Resistor_SMD:R_0603_1608Metric | R22 |
| 1 | 75k | Resistor_SMD:R_0603_1608Metric | R18 |
| 1 | AZ1117CH-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | Conn_01x14_Pin | TomoshibiLibrary:BoxHeader_2x07_P1.27mm_Horizontal | J1 |
| 1 | Conn_02x13_Odd_Even | Connector_PinHeader_1.27mm:PinHeader_2x13_P1.27mm_Vertical | J2 |
| 1 | DCDC_TPSM336x5 | TomoshibiLibrary:DCDC_TPSM336x5 | U6 |
| 1 | Encoder_Magnetic_AS5047P | Package_SO:TSSOP-14_4.4x5mm_P0.65mm | U5 |
| 1 | S8550 | Package_TO_SOT_SMD:SOT-23 | Q3 |
| 1 | SS2040FL | Diode_SMD:D_SOD-123 | D5 |
| 1 | SSM3J332R | Package_TO_SOT_SMD:SOT-23W | Q1 |
| 1 | STM32G473CET6 | Package_QFP:LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | SW_DIP_x04 | Button_Switch_SMD:SW_DIP_SPSTx04_Slide_Copal_CHS-04B_W7.62mm_P1.27mm | SW4 |
| 1 | SW_SPDT | TomoshibiLibrary:SW_Slide_SPDT_SSAJ120100 | SW3 |
| 1 | SW_SPST | Button_Switch_THT:SW_Tactile_SPST_Angled_PTS645Vx39-2LFS | SW1 |
More from Tomoshibi-technology/MovingDisplay3-Circuit
11- 2 layers

- 4 layers90 × 57 mm

- 2 layers102.2 × 125.7 mm

- 2 layers53.5 × 71.7 mm

- 2 layers53.5 × 34.4 mm

- 2 layers35.4 × 35.4 mm

- 4 layers35 × 35 mm

- 2 layers62.9 × 90.7 mm

- 2 layers53.5 × 34.4 mm

- 2 layers

- 2 layers53.5 × 34.4 mm

Similar boards
- 2 layers

- 2 layers

- 2 layers110 × 60 mm

LargeMD
Tomoshibi-technology/RCJ-Japan2024-Circuit
RoboCup JapanOpen 2024とEindohoven 2024に向けての回路開発
149 parts1MIT - 4 layers48 × 30 mm

- 2 layers40.6 × 20.3 mm

- 2 layers72 × 47.5 mm

- 2 layers99.1 × 99 mm

XDuinoRail Debug
chatelao/xDuinoRail-Decoder
The friendly decoder development plattform for model railroad tinkers.
170 partsAGPL-3.0 - 2 layers100 × 60 mm

Questions
How big is the Control PCB?
It measures 35 × 35 mm and has 4 copper layers, 1.22 mm thick.
What parts does the Control use?
102 parts, built around the STM32G473CET6, MAX3485ED, 1N5819WS and S8550. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Control KiCad files?
From the Tomoshibi-technology/MovingDisplay3-Circuit repository on GitHub, at the commit this page was made from: the board is circuits/MD_module/Control/Control.kicad_pcb and its schematic circuits/Amp/Amp.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Control design in my own project?
Its repository states no licence, so its author keeps all rights: ask Tomoshibi-technology before reusing the design.