
Type d
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

avans simon game
Simon is an open-source printed circuit board by Tommie1236, from the Tommie1236/avans-simon repository on GitHub. It is a 2-layer board of 63.5 × 50.8 mm with 14 parts on 32 nets, routed with 61 tracks and 0 vias.
Its parts include 4 resistors, 4 diodes and 4 switches. It belongs with the AVR (ATmega, ATtiny) boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 10K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3 |
| 1 | 120R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R4 |
| 1 | 150R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | 380R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2 |
| 1 | Arduino_Nano_v3.x | Module:Arduino_Nano | A1 |
| 1 | Buzzer | Buzzer_Beeper:Buzzer_TDK_PS1240P02BT_D12.2mm_H6.5mm | BZ1 |
| 1 | SW_blue | Button_Switch_THT:SW_PUSH_6mm | SW3 |
| 1 | SW_green | Button_Switch_THT:SW_PUSH_6mm | SW1 |
| 1 | SW_red | Button_Switch_THT:SW_PUSH_6mm | SW2 |
| 1 | SW_yellow | Button_Switch_THT:SW_PUSH_6mm | SW4 |
| 1 | blue | LED_THT:LED_D5.0mm | D3 |
| 1 | green | LED_THT:LED_D5.0mm | D1 |
| 1 | red | LED_THT:LED_D5.0mm | D2 |
| 1 | yellow | LED_THT:LED_D5.0mm | D4 |

google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards


hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!



Twotoz/C5VRX
Ultra-minimal, zero-CPU 5.8 GHz analog FPV video receiver using ESP32-C5 Wi-Fi 6 PHY MODEM_DIAG, BitScrambler WBFM demodulation & resistor DAC CVBS


It measures 63.5 × 50.8 mm and has 2 copper layers, 1.6 mm thick.
14 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Tommie1236/avans-simon repository on GitHub, at the commit this page was made from: the board is kicad/simon.kicad_pcb and its schematic kicad/simon.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Tommie1236 before reusing the design.