
Switch
byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

A PCB Antenna based on TI's SLOA135A
RFID Antenna is an open-source printed circuit board by TomPaynter, from the TomPaynter/RFID_Antenna repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 53 × 58.7 mm with 6 parts on 3 nets, routed with 33 tracks and 1 via.
Its parts include 3 capacitors, 1 resistor, 1 connector and 1 inductor. It belongs with the radio and wireless boards of this library.
This is a KiCAD PCB project of the antenna described in the Texas Instruments' Application Report SLOA135A: Antenna Matching for the TRF7960 RFID Reader (http://www.ti.com/lit/an/sloa135a/sloa135a.pdf) and is also here in the repo.
Some of the component values are different, this was found by analysing a prototype antenna on a network analyser.
All genuine Questions/Comments/Abuse would be greatly appreciated. I am by no means a PCB engineer and would like to learn.
If you like/use the work, it would be great to see a little star, Cheers!
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 47p | Capacitors_SMD:C_0805 | C1, C2 |
| 1 | 10p | Capacitors_SMD:C_0805 | C3 |
| 1 | 13.56 MHz Antenna | 13.56 RFID ANTENNA | L1 |
| 1 | 1k | Capacitors_SMD:C_0805 | R1 |
| 1 | Coax | Capacitors_SMD:C_1206_HandSoldering | P1 |

byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.


Jcparkyn/dpoint
Open-source digital stylus using camera tracking and inertial measurements

VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

It measures 53 × 58.7 mm and has 2 copper layers, 1.6 mm thick.
6 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the TomPaynter/RFID_Antenna repository on GitHub, at the commit this page was made from: the board is KiCAD/RFID_Antenna.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).