2 layers48 × 30 mm
2 layers91.4 × 71.1 mm
SwitchBoard
TillWege/dig-fab- Size
- 91.4 × 71.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 20
- Nets
- 8
- Pads
- 40
- Tracks, vias
- 61, 0
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 10 Oct 2023
- Updated
- 20 Feb 2024
Overview
SwitchBoard is an open-source printed circuit board by TillWege, from the TillWege/dig-fab repository on GitHub. It is a 2-layer board of 91.4 × 71.1 mm with 20 parts on 8 nets, routed with 61 tracks and 0 vias.
Its parts include 8 connectors, 6 resistors and 6 switches.
Parts
20| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 499R | fab:R_1206 | R1, R2, R3, R4, R5, R6 |
| 6 | Conn_PinHeader_1x01_P2.54mm_Horizontal_SMD | fab:PinHeader_1x01_P2.54mm_Vertical_THT_D1mm | J1, J2, J3, J4, J5, J6 |
| 6 | SW_Push | PCM_Switch_Keyboard_Cherry_MX:SW_Cherry_MX_Plate | SW1, SW2, SW3, SW4, SW5, SW6 |
| 1 | PIN GND | fab:PinHeader_1x02_P2.54mm_Vertical_THT_D1mm | J8 |
| 1 | PIN VCC | fab:PinHeader_1x02_P2.54mm_Vertical_THT_D1mm | J7 |
More from TillWege/dig-fab
2- 2 layers48.3 × 40.6 mm
Similar boards
- 2 layers66.9 × 74.5 mm
- 2 layers86.4 × 64.8 mm
- 2 layers36.2 × 26.8 mm
Esp32 minimal
atopile/atopile
Design circuit boards with code! ✨ Get software-like design reuse 🚀, validation, version control and collaboration in hardware; starting with electronics ⚡️
20 parts4kMIT - 2 layers108.1 × 393.8 mm
Sweep compact ble
davidphilipbarr/Sweep
Sweep - a small promicro based keyboard inspired by the Ferris.
20 parts2.1k - 2 layers26 × 15.9 mm
TPS54340 Buck Regulator
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
20 parts1.2k - 2 layers67.6 × 30.5 mm
Rgb to hdmi
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
20 parts1kGPL-3.0 - 2 layers44.3 × 28.7 mm
Lin bus adapter esp32
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
20 parts915 - 2 layers89.5 × 61.6 mm
FreeDeck TH 2020-02
FreeYourStream/freedeck-hardware
all the stuff you need to build your own FreeDeck
20 parts772
Questions
How big is the SwitchBoard PCB?
It measures 91.4 × 71.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the SwitchBoard use?
20 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the SwitchBoard KiCad files?
From the TillWege/dig-fab repository on GitHub, at the commit this page was made from: the board is Project/PCBs/SwitchBoard/SwitchBoard.kicad_pcb and its schematic Project/PCBs/Controller/Assignment10.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the SwitchBoard design in my own project?
Its repository states no licence, so its author keeps all rights: ask TillWege before reusing the design.