
Acquisition board
open-ephys/oe-acquisition-board-gen3
3rd Generation Open Ephys USB Acquisition Board

BCI chip PCB is an open-source printed circuit board by ThomasJagielski, from the ThomasJagielski/BCI_test_pcb repository on GitHub. It is a 4-layer board of 99.9 × 100 mm with 53 parts on 206 nets, routed with 957 tracks and 167 vias.
It is built around the SN74AUC2G34DCKRE4, SN65LVDS33D and SN74LVC16T245DLR, with the 225-PRS15001-12 and A79623-001 among its other parts. Its parts include 24 capacitors, 10 resistors, 9 connectors and 8 ICs.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 0.1u | Capacitor_SMD:C_0603_1608Metric | C17, C18, C19, C20, C21, C22 |
| 5 | 100 | Resistor_SMD:R_0805_2012Metric | R2, R3, R4, R5, R6 |
| 5 | 100n | Capacitor_SMD:C_0603_1608Metric | C1, C3, C9, C10, C23 |
| 5 | 10k | Resistor_SMD:R_0805_2012Metric | R1, R7, R8, R9, R11 |
| 5 | 10u | Capacitor_SMD:C_0603_1608Metric | C2, C4, C11, C12, C24 |
| 4 | SN74AUC2G34DCKR | logic_buffer:DCK6 | U4, U5, U6, U7 |
| 3 | 10p | Capacitor_SMD:C_0603_1608Metric | C5, C6, C13 |
| 3 | 1n | Capacitor_SMD:C_0603_1608Metric | C7, C8, C14 |
| 2 | 1u | Capacitor_SMD:C_0603_1608Metric | C15, C16 |
| 2 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J3, J4 |
| 2 | Conn_02x10_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x10_P2.54mm_Vertical | J5, J7 |
| 2 | SN65LVDS33D | avlsi_preferred_parts:D16 | U1, U3 |
| 2 | TestPoint | TestPoint:TestPoint_Loop_D2.50mm_Drill1.85mm | TP1, TP2 |
| 1 | 225-PRS15001-12 | avlsi_preferred_parts:225PRS1500112 | J2 |
| 1 | A79623-001 | avlsi_preferred_parts:CONN_A79623-001_OMN | J1 |
| 1 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J8 |
| 1 | Conn_02x02_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x02_P2.54mm_Vertical | J9 |
| 1 | Conn_02x09_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x09_P2.54mm_Vertical | J6 |
| 1 | SN74LVC16T245DLR | avlsi_preferred_parts:DL48 | U8 |
| 1 | ~ | avlsi_preferred_parts:chip_board | U2 |

open-ephys/oe-acquisition-board-gen3
3rd Generation Open Ephys USB Acquisition Board


murexrobotics/electrical
Highly integrated electronics design and printed circuit boards (PCBs) for the MATE ROV Competition. Attempt the impossible.


Rack-Robotics/Powercore-V3
electrical-discharge power supply, open-source

azerimaker/Penguino-SAMR34
This repo contains all the necessary design and fabrication files for the Penguino SAMR34 RF module and its Feather breakout board.


It measures 99.9 × 100 mm and has 4 copper layers, 1.6 mm thick.
53 parts, built around the SN74AUC2G34DCKRE4, SN65LVDS33D, SN74LVC16T245DLR and 225-PRS15001-12. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the ThomasJagielski/BCI_test_pcb repository on GitHub, at the commit this page was made from: the board is BCI_chip_PCB/BCI_chip_PCB.kicad_pcb and its schematic BCI_chip_PCB/BCI_chip_PCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask ThomasJagielski before reusing the design.