Skip to the content
2 layers100 × 100 mmIngonde 10x10, the printed circuit board in 3D

Ingonde 10x10

Thierry-oshw/Basine

Basine est une carte supportant Ultrogothe et les allumettes. Plusieurs variantes prévues.

Size
100 × 100 mm
Copper layers
2
Thickness
1.6 mm
Parts
1,170
Nets
1,066
Pads
1,206
Tracks, vias
79, 76
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
22 Nov 2024
Updated
2 Feb 2026

Overview

Ingonde 10x10 is an open-source printed circuit board by Thierry-oshw, from the Thierry-oshw/Basine repository on GitHub, published under the CERN-OHL-P-2.0 licence. It is a 2-layer board of 100 × 100 mm with 1,170 parts on 1,066 nets, routed with 79 tracks and 76 vias.

README

README.md

Basine

Basine est une carte supportant Ultrogothe et les allumettes. Plusieurs variantes prévues.

Parts

1,170
QtyValueFootprintReferences
1152PastilleChimere_comps:Pastille_carreeJ100, J101, J1000, J1001, J1002, J1003, J1004, J1005, J1006, J1007, J1008, J1009, J1010, J1011, J1012, J1013 +1136
182060-451/998-404Chimere_comps:Conn_bornier_et_wagoJ1, J2, J3, J4, J5, J6, J7, J10, J11, J12, J13, J14, J15, J16, J17, J18 +2

More from Thierry-oshw/Basine

1
  • 2 layers100 × 100 mmBasine, the printed circuit board in 3D

    Basine

    Thierry-oshw/Basine

    Basine est une carte supportant Ultrogothe et les allumettes. Plusieurs variantes prévues.

    226 partsCERN-OHL-P-2.0

Similar boards

  • 2 layers100 × 160 mmExp platine, the printed circuit board in 3D

    Exp platine

    Stefan311/A7150

    All about the IBM-XT-Clone A7150

    1,169 parts3BSD-2-Clause
  • 2 layers189.4 × 190.8 mmNRF24L01 adapter, the printed circuit board in 3D

    NRF24L01 adapter

    SolderedElectronics/NRF24L01-adapter-for-Dasduino-boards-hardware-design

    Hardware design, BOM, gerbers and 3D files for NRF24L01-adapter-for-Dasduino-boards designed by Soldered Electronics.

    1,164 parts
  • 2 layers271.8 × 172.7 mmPeripherl bridge panel, the printed circuit board in 3D

    Peripherl bridge panel

    Pongkemon01/Zeabus-Elec-Circuit-Peripheral_bridge

    Bridge circuit for several peripheral

    1,176 parts
  • 2 layers99.1 × 99.1 mmBus, the printed circuit board in 3D

    Bus

    johannesloetzsch/pillbus

    Simple and configurable bus controllers based on STM32.

    1,179 partsCERN-OHL-S-2.0
  • 2 layers90 × 58 mmMCU PROTO 100x68mm, the printed circuit board in 3D

    MCU PROTO 100x68mm

    galopago/misistemote

    Misistemote is an Open Source, modular ecosystem that uses pre-made PCB to mix and match your choice of processor board.

    1,183 parts11MIT
  • 2 layers267.2 × 162.5 mmSoldered Inkplate 5 panel, the printed circuit board in 3D

    Soldered Inkplate 5 panel

    SolderedElectronics/Soldered-Inkplate-5-hardware-design

    Hardware design, BOM, gerbers and 3D files for Soldered-Inkplate-5 designed by Soldered Electronics.

    1,148 parts

Questions

How big is the Ingonde 10x10 PCB?

It measures 100 × 100 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Ingonde 10x10 use?

1,170 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Ingonde 10x10 KiCad files?

From the Thierry-oshw/Basine repository on GitHub, at the commit this page was made from: the board is Ingonde_10x10/Ingonde_10x10.kicad_pcb and its schematic Basine_10x10/Basine.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Ingonde 10x10 design in my own project?

Its repository publishes it under the CERN-OHL-P-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).