Skip to the content
2 layers115 × 52 mmTropicalFruitBowl, the printed circuit board in 3D

A project that involves using OLEDs.

Size
115 × 52 mm
Copper layers
2
Thickness
1.6 mm
Parts
14
Nets
28
Pads
86
Tracks, vias
115, 4
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
26 Oct 2026
Updated
31 Oct 2026

Overview

TropicalFruitBowl is an open-source printed circuit board by TheTank87, from the TheTank87/TropicalFruitBowl repository on GitHub. It is a 2-layer board of 115 × 52 mm with 14 parts on 28 nets, routed with 115 tracks and 4 vias.

It is built around the DHT11. Its parts include 3 connectors, 3 switches, 2 ICs, 1 capacitor and 1 resistor. It belongs with the ESP32 and RISC-V boards of this library.

Main components

1

README

README.md

Tropical-Fruit-Bowl

Week43DRender

Description

A custom designed PCB that can track humidity, temperature, air pressure, and air quality in ppm. It also includes a gyrscope sensor. This project was heavily inspired by the Starbie and MIDI keyboard projects I did previously, and I wanted to combine them with some new components to see what I can make. This was a pretty exciting experience for me, because for once, I'm not following a guide anymore, and with the lessons and techniques I learned from the previous projects it's like building with LEGO. Once something becomes as fluent as LEGO building, I can let creativity take over.

Features

  • DHT11 Sensor
  • MPU6050 gyro Sensor
  • The new ENS160+AHT21 air quality sensor
  • 2 low profile switches
  • Potentiometer
  • Rotary Encoder
  • OLED

BOM

ItemQtySupplierCost/itemTotal CostLink
0.96 OLED1AliExpress$4.38$4.38Link
XIAO ESP32 C31Seeed Studio$5.20$5.20Link
MPU60501AliExpress$3.00$3.00Link
DHT111AliExpress$1.50$1.50Link
Kailh Choc Low-Profile Switches2AliExpress$1.50$3.00Link
RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm1AliExpress$1.60$1.60Link
ENS160+AHT21 module1AliExpress$4.10$4.10Link
Potentiometer_Bourns_PTA1543_Single_Slide1Mouser$2.25$2.25Link
SMD Capacitator1Digikey$0.13$0.13Link
Axial Resistor1Digikey$0.11$0.11Link
PCB1JLCPCB$6.90$6.90Link
Estimated total shipping1N/A$0.00$0.00N/A
Grand Total$32.17

Cad Modeling

Screenshot 2026-10-29 at 10 39 27 AM

The cad part was by far the most fun part of this project. I first had to list out what components I want to use because that's really important. Then I have to track down the correct symbols and footprints and sometimes sensors just need a pinheader connection to work. Wiring was pretty easy once I studied what power sources are mandatory and where data should go. I then added a ceramic capacitator to ease electrical noise since my board will be handling lots of data in real time. Bringing the board over to the PCB section I quickly designed the shape and I oriented and wired everything up pretty smoothly. It's like building with LEGO Technics.

Firmware

Description

The Tropical Fruit Bowl firmware is a an app built on Ardunion C++ designed to showcase the sensors. It features Starbie-like mechanics but the UI is really different. That is because it includes 3 interactive windows for data viewing. I spent the most time designing the firmware and you can see how it should work with the mermaid diagram below. I also decided to add a dedicated section for color customization just in case anyone wants to use this project for themselves.

Features

  • Moves the cursor, inspired from Starbie, and highlights where your cursor is.
  • Intro screen
  • Dynamic datas.
  • Components adjusts graphs to view liking.
  • Asks if you want to exit, instead of just turning off instantly.

Firmware Flow Chart

diagram

Hardware Controls

Hardware ComponentPin/InterfaceFunction in Firmware
Switch 1 (SW1)D8Power / Menu
Switch 2 (SW2)D7Select
MPU6050 IMUI2CCursor Movement
Slide Potentiometer (RV1)D3 (Analog)Y-Axis Graph Control
Rotary Encoder (SW3)D1 / D2X-Axis Graph Control

Assembly

Assembling this really shouldn't be a problem because I designed the pcb so that all components will have space inbetween other components, so one shouldn't worry about overlapping components. The sensors especiallu the gyroscope an air quality sensors should come with pin headers in the package so I wouldn't buy generic pin heads seperately.

Parts

14
QtyValueFootprintReferences
2SW_PushHackclub Footprints:Kailh Choc Low-Profile SwitchesSW1, SW2
10.1uFCapacitor_SMD:C_0603_1608MetricC1
110KResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_HorizontalR1
1DHT11Sensor:Aosong_DHT11_5.5x12.0_P2.54mmU2
1ENS160+AHT21 moduleConnector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_VerticalJ2
1LOGOWeek4Displays:Week4Silk2G***
1LOGOWeek4Displays:Week4Silk1G***
1LOGOWeek4Displays:Week4Silk3G***
1MPU6050Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_VerticalJ3
1OLEDImported Parts:Display_128x64_096_I2CJ1
1RotaryEncoder_Switch_MPRotary_Encoder:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mmSW3
1SliderPotentiometer_THT:Potentiometer_Bourns_PTA1543_Single_SlideRV1
1XIAO-ESP32-C3-SMDImported Parts:XIAO-ESP32-C6-DIPU1

Similar boards

  • 2 layers96.6 × 82.8 mmStarbie, the printed circuit board in 3D

    Starbie

    SharKingStudios/Starbie

    Half-Life Week 1 Example Project

    11 parts28MIT
  • 2 layers100 × 50 mmConveyor belt pcb, the printed circuit board in 3D

    Conveyor belt pcb

    lansidev/conveyor-belt

    Miniature 3D printed conveyor belt for simulation and fun working with sensors, all controllable with Raspberry Pi

    22 parts9MIT
  • 2 layers93 × 20 mmWiFi VFD, the printed circuit board in 3D

    WiFi VFD

    ciisaichan/WiFi-VFD

    开源的ESP8266驱动VFD屏电路,支持BiliBili粉丝数、时间、温度、湿度

    23 parts8MIT
  • 2 layersOpenMQTTGatewayPCB, the printed circuit board in 3D

    OpenMQTTGatewayPCB

    ebrithiljonas/OMG_PCB

    All in One PCB for the OpenMQTTGateway Project

    36 parts7GPL-3.0
  • 2 layers62 × 19.3 mmSniffingTrinket, the printed circuit board in 3D

    SniffingTrinket

    GeorgK/SniffingTrinket

    A room climate monitor using the Adafruit Trinket Pro

    23 parts6GPL-3.0
  • 2 layersArduino relay, the printed circuit board in 3D

    Arduino relay

    bhaskar9980/Guardian

    Guardian is an advanced, fully automated hydroponics system designed to optimize plant growth and maximize yield.

    58 parts5MIT
  • 2 layers100 × 43.5 mmFirefly, the printed circuit board in 3D

    Firefly

    Twistx77/Firefly

    Open WIFI-enabled RGB lamp with temperature, humidity, suspended air particles and eCO2 sensors.

    33 parts5GPL-3.0
  • 2 layers30.5 × 77.5 mmProyecto sensor temperatura, the printed circuit board in 3D

    Proyecto sensor temperatura

    unla-investigacion-desarrollo/ecosistema-iot

    Antes de desarrollar el sistema final, realizamos una etapa de exploración donde investigamos y experimentamos con las siguientes tecnologías:

    8 parts5

Questions

How big is the TropicalFruitBowl PCB?

It measures 115 × 52 mm and has 2 copper layers, 1.6 mm thick.

What parts does the TropicalFruitBowl use?

14 parts, built around the DHT11. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the TropicalFruitBowl KiCad files?

From the TheTank87/TropicalFruitBowl repository on GitHub, at the commit this page was made from: the board is PCB/TropicalFruitBowl.kicad_pcb and its schematic PCB/TropicalFruitBowl.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the TropicalFruitBowl design in my own project?

Its repository states no licence, so its author keeps all rights: ask TheTank87 before reusing the design.