Skip to the content
2 layers100 × 100 mmAeroportal, the printed circuit board in 3D

A weather focused alarm clock.

Size
100 × 100 mm
Copper layers
2
Thickness
1.6 mm
Parts
4
Nets
22
Pads
41
Tracks, vias
47, 3
Pours
1
Routed
Yes
KiCad
KiCad 8.99 (file 20241129)
Created
14 Dec 2024
Updated
2 Feb 2025

Overview

Aeroportal is an open-source printed circuit board by TheScientist101, from the TheScientist101/aeroportal repository on GitHub. It is a 2-layer board of 100 × 100 mm with 4 parts on 22 nets, routed with 47 tracks and 3 vias.

Its parts include 2 ICs, 1 resistor and 1 connector.

README

README.md

Aeroportal

Aeroportal is a weather-centered home hub that is designed with simplicity at its core.

The dashboard is hosted at: https://aeroportal.urjith.dev/

website

Features

  • Weather information
  • Time and date
  • Alarms
  • Broadcast audio messages

Hardware

PCB

The PCB is designed in KiCad which is in the pcb folder. The electronics consist of a Wemos C3 mini, a TFT display, an I2S amplifier, and a speaker. The PCB is designed to be powered by a USB-C cable connected a wall outlet.

SchematicPCB
  • I ran DRC in KiCad and have made sure there are 0 errors!

Case

The case is designed in Openscad which is in the cad folder. To assemble, print the top and bottom parts of the case and assemble them as shown in cad/assembled.scad. Glue the holes in the top part to the bottom part to help keep the case together.

It's supposed to look like a lightning bolt, but it I've squeezed it a little due to sizing constraints.

assembled case

Software

Website

The dashboard website is written in Next.js with the Next UI library for the UI components. The website is in the website folder. The website is hosted at: https://aeroportal.urjith.dev/.

Firmware

The firmware is written in Circuitpython and is currently very rudamentary since I do not currently have the hardware to test it. The firmware is in the firmware folder. It should be able to connect to the internet, display the weather information on the TFT display, and play scheduled alarms or broadcasted messages (using the API).

  • I remembered to exclude any personal information, including API Keys, WiFi passwords, etc

BOM

Provided by dari // alex:

  • 1x WeMos C3 Mini (as a cheaper replacement for the S2) WITHOUT FEMALE HEADERS
  • 1x ST7735 1.8" LCD display WITHOUT FEMALE HEADERS. Male headers soldered!

I will be printing my case myself for the additional $10 in my grant.

  • 1x Top Half of the Case
  • 1x Bottom Half of the Case

I will be sourcing the following parts with my grant:

  • 1x PCB from JLCPCB
    • $2 for 5x + $1.50 shipping
  • 1x 2.5 Inch 4 Ohm, 3 Watt Speaker (AliExpress)
    • $3.69 + $1.99 shipping
  • 1x MAX98357A I2S Amplifier (AliExpress)
    • $1.73
  • 1x USB-C Cable (AliExpress)
    • $3.21
  • 1x 18 AWG Wire for Speaker (AliExpress)
    • $8.66
    • Note, this price has been fluctuating a lot (it was around $5 earlier), so I may use a different link if it goes up too much.

Total before tax: $22.78 Total after tax: $24.66

I'll also be source the following parts myself since I already have them and would like to help Hack Club:

  • 1x 10 Ohm Resistor

Parts

4
QtyValueFootprintReferences
110 OHMResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR1
1MAX98357A Breakout BoardConnector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_VerticalJ1
1TFT_ST7735_SDasylum-weather:TFT_ST7735_SDU2
1WEMOS_C3_MiniRF_Module:WEMOS_D1_mini_lightU1

Similar boards

  • 2 layers18.5 × 26 mm24g2usb rp2350zero, the printed circuit board in 3D

    24g2usb rp2350zero

    joypad-ai/joypad-os

    Universal controller firmware for building adapters, dongles, and custom controllers.

    4 parts1.7kApache-2.0
  • 2 layers116 × 33 mm966595-1 and 963356-1, the printed circuit board in 3D

    966595-1 and 963356-1

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    4 parts1.2k
  • 2 layers19 × 18 mmDaughter board, the printed circuit board in 3D

    Daughter board

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    4 parts915
  • 2 layers24.8 × 24.8 mmNrf24 breakout, the printed circuit board in 3D

    Nrf24 breakout

    tardate/LittleArduinoProjects

    a collection of "Little Electronic & Arduino Projects", most involving electronics or an Arduino in one way or another!

    4 parts803MIT
  • 2 layers26 × 20 mmCap chain, the printed circuit board in 3D

    Cap chain

    drandyhaas/KiCadRoutingTools

    A set of Python/Rust tools to aid routing in KiCad

    4 parts744MIT
  • 2 layers34.7 × 20 mmXG Station Power MSI, the printed circuit board in 3D

    XG Station Power MSI

    osy/XG_Mobile_Station

    Open source eGPU dock for ROG Ally and ROG Flow

    4 parts712CC-BY-4.0
  • 2 layers20.3 × 24.5 mmJack power input, the printed circuit board in 3D

    Jack power input

    Luos-io/luos_engine

    Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

    4 parts546MIT

Questions

How big is the Aeroportal PCB?

It measures 100 × 100 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Aeroportal use?

4 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Aeroportal KiCad files?

From the TheScientist101/aeroportal repository on GitHub, at the commit this page was made from: the board is pcb/aeroportal.kicad_pcb and its schematic pcb/aeroportal.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Aeroportal design in my own project?

Its repository states no licence, so its author keeps all rights: ask TheScientist101 before reusing the design.