TheEinfachFelix/GameMasterA Framework that alows you to easely program gameshows
Buzzer Box is an open-source printed circuit board by TheEinfachFelix, from the TheEinfachFelix/GameMaster repository on GitHub. It is a 2-layer board of 105.5 × 60.5 mm with 77 parts on 92 nets, routed with 511 tracks and 85 vias.
It is built around the ESP32-S3-WROOM-1-N8, LTV-817S and USBLC6-2SC6, with the AO3400A and TL1105AF160Q among its other parts. Its parts include 24 ICs, 20 resistors, 18 connectors, 8 transistors and 4 capacitors. It belongs with the ESP32 boards of this library.
A Framework that alows you to easely program gameshows
| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 4691 | KiCad:4691 | IC1, IC2, IC3, IC4, IC5, IC6, IC7, IC8, IC9, IC10, IC11, IC12 |
| 8 | 10k | Resistor_SMD:R_0805_2012Metric | R3, R4, R5, R6, R7, R8, R9, R10 |
| 8 | AO3400A | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8 |
| 8 | Conn_01x03_Socket | Connector_JST:JST_XH_B3B-XH-AM_1x03_P2.50mm_Vertical | J2, J3, J4, J5, J7, J8, J9, J10 |
| 8 | LTV-817S | Package_DIP:SMDIP-4_W9.53mm | U1, U3, U4, U5, U6, U7, U8, U9 |
| 4 | 10k | Resistor_SMD:R_0603_1608Metric | R11, R14, R15, R16 |
| 4 | R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R17, R18, R19, R20 |
| 3 | GPIO 2 + GND | Connector_JST:JST_XH_B2B-XH-AM_1x02_P2.50mm_Vertical | J1, J6, J12 |
| 2 | 100n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C8 |
| 2 | 5k1 | Resistor_SMD:R_1206_3216Metric | R12, R13 |
| 2 | TL1105AF160Q | Library:TL1105AF160Q | S1, S2 |
| 2 | ~ | Library:VC-D-40-A | U11, U12 |
| 1 | 1M | Resistor_SMD:R_1206_3216Metric | R1 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | 1nF | Capacitor_SMD:C_1206_3216Metric | C5 |
| 1 | 22u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2 |
| 1 | 24V | Connector_Wire:SolderWirePad_1x01_SMD_1x2mm | J21 |
| 1 | 3V3 | Connector_Wire:SolderWirePad_1x01_SMD_1x2mm | J20 |
| 1 | 500mA PTC | Fuse:Fuse_1206_3216Metric_Pad1.42x1.75mm_HandSolder | F1 |
| 1 | 5V | Connector_Wire:SolderWirePad_1x01_SMD_1x2mm | J22 |
| 1 | ESP32-S3-WROOM-1 | RF_Module:ESP32-S3-WROOM-1 | U10 |
| 1 | GND | Connector_Wire:SolderWirePad_1x01_SMD_1x2mm | J19 |
| 1 | IO41 | Connector_Wire:SolderWirePad_1x01_SMD_1x2mm | J16 |
| 1 | IO42 | Connector_Wire:SolderWirePad_1x01_SMD_1x2mm | J15 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U2 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J11 |
TheEinfachFelix/CampPhone
Warum habe ich mich dagegen entschieden, das Sim Modul selber zu implementieren? Ich habe kein Chip gefunden, der günstiger als das fertige Modul war, und ein Datenblatt in Englischer Sprache hat.
UCSIG/attiny85_time_switch
Low-power time switch using the ATtiny85 microcontroller.
Jjbinstock/RF-Clock-Generator
A dual channel, tunable RF clock generator PCB project
JohnanLuca02/BYTE_Electronics
Repository for everything concerning the electronics (PCB, Electrical schemes, BOM, ...) of the robot dog project of the AiTeam called BYTE.
electromotif208/pcb-portfolio
👨💻 Electronics Engineer 📺 YouTube: ELECTROMOTIF 🔧 Tools: KiCad, EasyEDA 📡 Domains: Power Supply, ESP32, IoT, Embedded Hardware
It measures 105.5 × 60.5 mm and has 2 copper layers, 1.6 mm thick.
77 parts, built around the ESP32-S3-WROOM-1-N8, LTV-817S, USBLC6-2SC6 and AO3400A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the TheEinfachFelix/GameMaster repository on GitHub, at the commit this page was made from: the board is Hardware/Buzzer Box/Buzzer Box.kicad_pcb and its schematic Hardware/Buzzer Box/Buzzer Box.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask TheEinfachFelix before reusing the design.