

XBOX USB
Collection of information and schematics of the XBOX Rev 1.0 USB PCB - Moved to codeberg!
- Size
- 97 × 27 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 36
- Nets
- 56
- Pads
- 142
- Tracks, vias
- 232, 18
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 19 Oct 2019
- Updated
- 26 Oct 2019
Overview
XBOX USB is an open-source printed circuit board by Teufelchen1, from the Teufelchen1/XBOX-USB-HUB repository on GitHub, published under the MIT licence. It is a 2-layer board of 97 × 27 mm with 36 parts on 56 nets, routed with 232 tracks and 18 vias.
It is built around the TUSB2046BVF. Its parts include 19 resistors, 6 capacitors, 4 connectors, 1 IC and 1 inductor.
Main components
1README
README.mdXBOX-USB-HUB
Collection of information and homemade schematics of the XBOX Rev 1.0 USB PCB



| Label | Value | CLabel | State | Function |
|---|---|---|---|---|
| R1 | 0 | R1 | Ok | In series DM0 |
| R2 | 0 | R2 | Ok | In series DP0 |
| R3 | 700 | R3 | Value guessed | Pull-up DP0 |
| R4 | Unkown | |||
| R5 | 1.5k | R5 | Value from DS | between IC & crystal |
| R6 | 15k | R6 | Value guessed | Pull-down DM1 |
| R7 | 15k | R7 | Value guessed | Pull-down DP1 |
| R8 | 36 | R8 | Value guessed | Termination of DM1 |
| R9 | 36 | R9 | Value guessed | Termination of DP4 |
| R10 | 36 | R10 | Value guessed | Termination of DP1 |
| R11 | 35 | R11 | Value guessed | Termination of DM4 |
| R12 | 15k | R12 | Value guessed | Pull-down DP4 |
| R13 | 15k | R13 | Value guessed | Pull-down DM4 |
| R14 | 36 | R14 | Value guessed | Termination of DM2 |
| R15 | 15k | R15 | Value guessed | Pull-down DM2 |
| R16 | 15k | R16 | Value guessed | Pull-down DP2 |
| R17 | 36 | R17 | Value guessed | Termination of DP2 |
| R18 | 36 | R18 | Value guessed | Termination of DP3 |
| R19 | 36 | R19 | Value guessed | Termination of DM3 |
| R20 | 15k | R20 | Value guessed | Pull-down DM3 |
| R21 | 15k | R21 | Value guessed | Pull-down DP3 |
| C21 | C21 | intended | Stability 5V-GND controler 3/4 | |
| C26 | C26 | intended | Stability 5V-GND controler 3/4 | |
| C4 | Unpopulated | |||
| C3 | Unpopulated | |||
| C6 | Unpopulated | |||
| C9 | Unpopulated | |||
| C10 | Unpopulated | |||
| C14 | Unpopulated | |||
| C15 | Unpopulated | |||
| C18 | Missing | Stability 3.3V-GND | ||
| C5 | Missing | Stability 3.3V-GND | ||
| C2 | Missing | Stability 3.3V-GND | ||
| C19 | Missing | Stability 3.3V-GND | ||
| C20 | Missing | Stability 3.3V-GND | ||
| C7 | 27pF | C7 | Value from DS | crystal |
| C8 | 27pF | C8 | Value from DS | crystal |
| C24 | Missing | GND-C24-L3-3.3V | ||
| C25 | Missing | GND-C25-L3-3.3V | ||
| C11 | Missing | GND-C11-3.3V | ||
| C12 | Unpopulated | |||
| C13 | Unpopulated | |||
| C16 | Unpopulated | |||
| C17 | Unpopulated | |||
| C23 | C23 | intended | Stability 5V-GND controler 1/2 | |
| C22 | C22 | intended | Stability 5V-GND controler 1/2 | |
| C27 | Missing | |||
| L7 | L7 | intended | In series 5V | |
| L8 | L8 | intended | In series 5V | |
| L2 | Missing | Common mode chokes | ||
| L6 | Missing | Common mode chokes | ||
| L1 | Missing | |||
| L9 | Missing | Common mode chokes | ||
| L10 | Missing | Common mode chokes | ||
| L4 | L4 | intended | In series 5V | |
| L5 | L5 | intended | In series 5V | |
| P1 | H JST 12 | P1 | Ok | Controler 3 & 4 |
| P3 | 2x6 male | P3 | Ok | Host USB, Yellow 1 & 2 |
| P2 | H JST 12 | P2 | Ok | Controler 1 & 2 |
| P4 | 2x6 male | P4 | Ok | Yellow 3 & 4 |
| Y1 | 6MHz | Y1 | Ok | crystal |
| U2 | TUSB2046B | U2 | Ok | Main IC |
Parts
36| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 15k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R6, R7, R12, R13, R15, R16, R20, R21 |
| 8 | 36 | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R8, R9, R10, R11, R14, R17, R18, R19 |
| 4 | 100µF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C21, C22, C23, C26 |
| 4 | Ferrite_Bead_Small | Inductor_SMD:L_1806_4516Metric_Pad1.57x1.80mm_HandSolder | FB1, FB2, FB3, FB4 |
| 2 | 0 | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R1, R2 |
| 2 | 27pF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C7, C8 |
| 2 | Conn_02x06_Odd_Even | Connector_PinHeader_2.00mm:PinHeader_2x06_P2.00mm_Horizontal | P3, P4 |
| 2 | H JST 12 | Connector_JST:JST_PHD_B12B-PHDSS_2x06_P2.00mm_Vertical | P1, P2 |
| 1 | 1.5k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R5 |
| 1 | 6.0Mhz | Crystal:Crystal_SMD_HC49-SD | Y1 |
| 1 | L_Small | Inductor_SMD:L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | L1 |
| 1 | TUSB2046 | Package_QFP:LQFP-32_7x7mm_P0.8mm | U2 |
Similar boards
- 2 layers68 × 87 mm

- 2 layers89 × 130.9 mm

Macropad
alexBinos/Macropad
A 5x4 key macropad with rotary encoder, OLED display and per-key RGB lighting
178 parts - 2 layers80 × 50 mm

Digirig shack
softcomplex/Digirig-Mobile
Integrated digital modes interface for amateur radio
63 parts133GPL-3.0 - 2 layers65 × 30 mm

Rgb to hdmi
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
36 parts1kGPL-3.0 - 2 layers55 × 70 mm

Arduino v1
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
36 parts915 - 2 layers50.4 × 24.8 mm

- 2 layers45.7 × 31.8 mm

LEDx16 board
tardate/LittleArduinoProjects
a collection of "Little Electronic & Arduino Projects", most involving electronics or an Arduino in one way or another!
36 parts803MIT - 2 layers32 × 24 mm

Questions
How big is the XBOX USB PCB?
It measures 97 × 27 mm and has 2 copper layers, 1.6 mm thick.
What parts does the XBOX USB use?
36 parts, built around the TUSB2046BVF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the XBOX USB KiCad files?
From the Teufelchen1/XBOX-USB-HUB repository on GitHub, at the commit this page was made from: the board is XBOX_USB.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the XBOX USB design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).