Skip to the content
2 layers94 × 63.5 mmGalaxEye, the printed circuit board in 3D

Internship Task for GalaxEye Space

Size
94 × 63.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
47
Nets
66
Pads
174
Tracks, vias
275, 18
Pours
1
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
23 Jan 2023
Updated
23 Jan 2023

Overview

GalaxEye is an open-source printed circuit board by Tejeswar682, from the Tejeswar682/GalaxEyePCBDesign repository on GitHub. It is a 2-layer board of 94 × 63.5 mm with 47 parts on 66 nets, routed with 275 tracks and 18 vias.

It is built around the 74HC595D,118 and BSS138. Its parts include 32 resistors, 7 connectors, 4 ICs and 4 transistors.

Main components

2

README

README.md

GalaxEyePCBDesign

Internship Task for GalaxEye Space

GALAXEYE SPACE

INTERNSHIP TASK

Problem Statement:

  1. You need to be able to convert inputs from up to 4 different digital I/O pins and get an output of 24 GPIO pins with a different logic level.
  2. You need to design a neatly labeled schematic of this design and also generate a BOM with links to in-stock parts

Solution:

The Microcontroller will send out values at 3.3V level, from 4 different digital I/O pins. The output from these pins are passed through a level shifter to convert them to a different logic level. Once the logic level has been changed, the 4 output values are passed through 4 8 bit SIPO shift registers to obtain a total of 32 bits as output. Finally, 2 bits from each SIPO shift register were grounded to shorten the output to just 24 bits.

Assumptions:

  1. The Microcontroller input is directly given by the user. The Microcontroller reads it and directly passes it on to the Level Shifter without the requirement of any external processing.
  2. 2 Bits from each SIPO Shift register were chosen and connected to the ground. An alternative would be to connect 8 bits from an entire shift register to bring down the output to 24 bits instead of 32 bits, but then we would have to ignore an input completely out of the 4 input bits.

Components:

  1. SIPO Shift Register – 74HC595D
  2. 3.3V to 5V Logic Level Converter – Sparkfun Bi-Directional Logic Level Converter.

Parts

47
QtyValueFootprintReferences
32RResistor_SMD:R_0805_2012MetricR1, R2, R11, R12, R13, R14, R15, R16, R19, R20, R21, R22, R23, R24, R25, R26 +16
5Conn_01x06_FemaleConnector_Molex:Molex_SL_171971-0006_1x06_P2.54mm_VerticalJ1, J2, J3, J4, J5
474HC595D,118SamacSys_Parts:SOIC127P600X175-16NIC1, IC2, IC3, IC4
4BSS138Package_TO_SOT_SMD:SOT-23Q1, Q2, Q3, Q4
2Conn_01x02_FemaleConnector_Molex:Molex_SL_171971-0002_1x02_P2.54mm_VerticalJ7, J8

Similar boards

  • 2 layers70 × 100 mmBadge v2, the printed circuit board in 3D

    Badge v2

    ICRS/IC-Hack-Badge

    Badges made for the largest Student run hackathon in europe

    233 parts24
  • 4 layers71.5 × 67.8 mmCustom pcb, the printed circuit board in 3D

    Custom pcb

    depau/leviot-hw

    WIP - first revision HAS ISSUES - Levoit Air Purifier Custom IoT PCB - based on ESP32

    91 parts10
  • 6 layers80 × 70 mmIMX6 Demo Board from REF, the printed circuit board in 3D

    IMX6 Demo Board from REF

    ts-manuel/iMX6-Demo-Board

    Demo board for the i.MX6ULL Single-Core Processor with Arm Cortex-A7 Core

    504 parts10GPL-3.0
  • 2 layers150 × 100 mmChristmas banana synth, the printed circuit board in 3D

    Christmas banana synth

    adaand00/christmas-banana-synth

    The Christmas banana synth is a stylophone synthesizer with 24 keys and a buzzer for sound. The back features PCB art of a winter landscape. There are also 12 built-in songs available.

    87 parts2
  • 2 layers110 × 110 mmFloorHeatingCentral, the printed circuit board in 3D

    FloorHeatingCentral

    kvoit/FloorHeatingController_HW

    Contoller board for up to 10 floor heading circuits. Thermostats via MQTT or 868MHz RF (to be developed). Changed from 1-Wire to 868MHz connectivity in version 2.0.

    72 parts2Apache-2.0
  • 2 layers99.8 × 49.8 mmLedArrayDemo, the printed circuit board in 3D

    LedArrayDemo

    radex/radmatrix

    Tiny modular LED matrix. NOTE: Moved to https://code.hackerspace.pl/radex/radmatrix

    453 parts2
  • 2 layers70 × 70 mmCorolla wheel car, the printed circuit board in 3D

    Corolla wheel car

    Cxmrykk/Toyota-Steering-Wheel

    Toyota (20-24) EV Steering Wheel Transceiver, Clockspring, Spline Adapter

    40 parts1
  • 4 layers208 × 129 mmMainboard v2 r1, the printed circuit board in 3D

    Mainboard v2 r1

    Benjamin-girard-1/geophys_acquisition_module

    Modular ESP32-S3 geophysical data-acquisition system with custom hardware, multi-channel ADC, GNSS, IMU, removable analog sensor cards, firmware, and host tools

    287 parts

Questions

How big is the GalaxEye PCB?

It measures 94 × 63.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the GalaxEye use?

47 parts, built around the 74HC595D,118 and BSS138. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the GalaxEye KiCad files?

From the Tejeswar682/GalaxEyePCBDesign repository on GitHub, at the commit this page was made from: the board is GalaxEye/GalaxEye.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the GalaxEye design in my own project?

Its repository states no licence, so its author keeps all rights: ask Tejeswar682 before reusing the design.