Skip to the content
2 layers89 × 51 mmBusiness Card, the printed circuit board in 3D

Personal Business Card with fully functional ESP-32 and NFC

Size
89 × 51 mm
Copper layers
2
Thickness
1 mm
Parts
54
Nets
60
Pads
224
Tracks, vias
417, 77
Pours
41
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
22 Sep 2023
Updated
23 Sep 2023

Overview

Business Card is an open-source printed circuit board by Teehee2, from the Teehee2/ESP-32-Business-Card repository on GitHub, published under the MIT licence. It is a 2-layer board of 89 × 51 mm with 54 parts on 60 nets, routed with 417 tracks and 77 vias.

It is built around the CH340C, ST25DV04K-IER6S3 and AMS1117-3.3, with the AMS1117-5.0 and BC817 among its other parts. Its parts include 12 capacitors, 10 resistors, 8 connectors, 5 ICs and 4 diodes. It belongs with the ESP32 boards of this library.

Main components

5

README

README.md

ESP-32-Business-Card

Personal Business Card with fully functional ESP-32 and NFC

Latest version V0.2

Friends with version V0.1: PLEASE TAKE NOTE! DO NOT USE CLIP POINT USB 5V! IT WILL SHORT TO GROUND!

For DIY users: V0.1 is flawed with mixed up tx/rx traces! Enamel wires need to be flown to use ESP32! SW1 does not work with resistor R9, it is recommended to short the pads across R9.

ESP32 Business Card

Parts

54
QtyValueFootprintReferences
90.1uCapacitor_SMD:C_0603_1608MetricC1, C2, C3, C4, C7, C8, C9, C10, C11
447Resistor_SMD:R_0603_1608MetricR5, R6, R7, R8
4Conn_01x04Custom footprints:PinHeader_1x04_P2.54mm_Vertical_No_SilkJ3, J5, J6, J7
4LEDLED_SMD:LED_0603_1608MetricD1, D2, D3, D4
310KResistor_SMD:R_0603_1608MetricR3, R4, R9
25K1Resistor_SMD:R_0603_1608MetricR1, R2
2?Capacitor_SMD:C_0603_1608MetricC13, C14
2AMS1117-3.3Package_TO_SOT_SMD:SOT-223-3_TabPin2U3, U7
2BC817Package_TO_SOT_SMD:SOT-23Q1, Q2
2VAL**Custom footprints:mouse-bite-2mm-slot_1mouse-bite-2mm-slot, mouse-bite-2mm-slot
10Resistor_SMD:R_0603_1608MetricR10
1100pCapacitor_SMD:C_0603_1608MetricC12
1AMS1117-5.0Package_TO_SOT_SMD:SOT-223-3_TabPin2U6
1CH340CPackage_SO:SOIC-16_3.9x9.9mm_P1.27mmU1
1Conn_01x01Custom footprints:PinHeader_1x01_P2.54mm_Vertical_No_SilkJ8
1Conn_01x09Custom footprints:PinHeader_1x09_P2.54mm_Vertical_No_SilkJ4
1Conn_01x14Custom footprints:PinHeader_1x14_P2.54mm_Vertical_1_No_SilkJ2
1ESP32-WROOM-EPCM_Espressif:ESP32-WROOM-32EU2
1LOGOQRCodes:linkedinG***
1LOGOQRCodes:davidkong.techG***
1LOGOQRCodes:githubG***
1LOGOCustom footprints:Github Business Card ProjectG***
1LOGOCustom footprints:NFC LOGO 10x11.2G***
1ST25DV04K-IER6S3Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mmN1
1SW_SPSTButton_Switch_SMD:SW_DIP_SPSTx01_Slide_Copal_CHS-01B_W7.62mm_P1.27mmSW1
1USB_C_Receptacle_USB2.0Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12J1
1~Custom footprints:NFC2AE1

The 51 most common of 54 parts.

Similar boards

  • 2 layers58.6 × 20 mmMuTag, the printed circuit board in 3D

    MuTag

    MrMoDDoM/MuTag

    Repository for PCB and source file of the MuHack NFC Tag keychain

    30 parts14AGPL-3.0
  • 2 layersDc30, the printed circuit board in 3D

    Dc30

    imjollyroger/JollyBadge_DC30

    DC30 JollyBadge

    31 parts1MIT
  • 2 layers100 × 100 mmECU SMD, the printed circuit board in 3D

    ECU SMD

    ASURacingTeam/EV19-SafetyShutdown

    133 partsMIT
  • 2 layers100 × 100 mmProject RedGlow, the printed circuit board in 3D

    Project RedGlow

    ASURacingTeam/ICE-EngineControlUnit

    503 parts
  • 4 layers309.5 × 145 mmMicro HIL v0.1, the printed circuit board in 3D

    Micro HIL v0.1

    danielsimonreinhardt/microHIL

    microHIL is a self-developed testing device for setting up a basic hardware-in-the-loop environment

    396 partsMIT
  • 2 layers139.7 × 88.9 mmCharge Controller, the printed circuit board in 3D

    Charge Controller

    jharvey/Charge_Controller

    MPPT hardware which uses FUGU firmware

    163 parts24
  • 4 layers62.9 × 88.6 mmBit block, the printed circuit board in 3D

    Bit block

    Citrullin/Sovereign_Bunny_Stack

    From web 3 unicorn fantasy to federated web 2.5 reality.

    169 parts4

Questions

How big is the Business Card PCB?

It measures 89 × 51 mm and has 2 copper layers, 1 mm thick.

What parts does the Business Card use?

54 parts, built around the CH340C, ST25DV04K-IER6S3, AMS1117-3.3 and AMS1117-5.0. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Business Card KiCad files?

From the Teehee2/ESP-32-Business-Card repository on GitHub, at the commit this page was made from: the board is Business Card.kicad_pcb and its schematic Business Card.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Business Card design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).