
InterfaceBoard
TeamMeanMachine/Electronics
They also frequently require the library files contained in the Core folder of this repository

They also frequently require the library files contained in the Core folder of this repository
SensorShroud is an open-source printed circuit board by TeamMeanMachine, from the TeamMeanMachine/Electronics repository on GitHub, published under the Unlicense licence. It is a 2-layer board of 30.5 × 30.5 mm with 12 parts on 18 nets, routed with 114 tracks and 8 vias.
Its parts include 8 diodes and 4 connectors.
Most of our PCBs require the Digikey PCB Library available at https://github.com/Digi-Key/digikey-kicad-library as well as the Sparkfun libraries available at https://github.com/sparkfun/SparkFun-KiCad-Libraries
They also frequently require the library files contained in the Core folder of this repository
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | APA102 | LED_SMD:LED_RGB_5050-6 | D1, D2, D3, D4, D5, D6, D7, D8 |
| 2 | Conn_01x02 | Custom:1X02_ACTUAL_SIZE | J6, J8 |
| 2 | Conn_01x04 | Custom:1X04_ACTUAL_SIZE | J5, J7 |

TeamMeanMachine/Electronics
They also frequently require the library files contained in the Core folder of this repository

TeamMeanMachine/Electronics
They also frequently require the library files contained in the Core folder of this repository

TeamMeanMachine/Electronics
They also frequently require the library files contained in the Core folder of this repository

TeamMeanMachine/Electronics
They also frequently require the library files contained in the Core folder of this repository

TeamMeanMachine/Electronics
They also frequently require the library files contained in the Core folder of this repository

github-linguist/linguist
Language Savant. If your repository's language is being reported incorrectly, send us a pull request!


google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards



hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

VoronDesign/Voron-Tap
Tap is a nozzle-based z-probe for the V2 and Trident printer designs. The entire toolhead moves to trigger an optical switch. Tap offers many advantages:

stacksmashing/pico-tpmsniffer
A simple, very experimental TPM sniffer for LPC bus
It measures 30.5 × 30.5 mm and has 2 copper layers, 1.6 mm thick.
12 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the TeamMeanMachine/Electronics repository on GitHub, at the commit this page was made from: the board is 2020/Color Sensor/SensorShroud.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the Unlicense licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).